DROPS Super Sale - 6 popular yarns on sale all month!

Knitted slippers and how to sew up the slippers in 150-4

Video thumbnail for Knitted slippers and how to sew up the slippers in 150-4
In this DROPS video we show how to knit and sew up one of our popular slippers. We have already cast on 36 sts and worked garter stitch until piece measures 4 cm. REMEMBER - very important - you will need to read the pattern to be able to follow. If you just want to see how to sew up the slippers, you can fast forward to 12:30. To see the pattern to this slippers, go to: DROPS 150-4

Patterns using this technique

DROPS 150-4

DROPS 150-4
Change language:

Video #567, listed in: Pattern tutorials, Socks and Slippers, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Mouron wrote:

Bonjour Pour le tricot de la jambe je ne comprends pas quand faire la cote mousse. Je fais un rang endroit un rang envers que je répète. Quand doit on faire les côte mousse ? Merci de votre aide

09.04.2023 - 22:40

DROPS Design :

Bonjour Mme Mouron, pour tricoter 1 côte mousse en rond, on doit répéter (1 tour en mailles endroit, 1 tour en mailles envers), comme vous pourrez le voir dans cette vidéo. Bon tricot!

11.04.2023 - 14:38

Country flag Olga wrote:

Добрый день. Как вязать по кругу, чтобы получился узор лицевыми петлями с двух сторон? У меня с одной стороны получается лицевая гладь, а с другой изнаночная. Спасибо.

25.05.2022 - 19:03

DROPS Design :

Добрый вечер. Когда вяжем вкруговую: для лицевой глади все ряды вяжем лицевыми петлями; для платочной глади вяжем один ряд лицевыми петлями и один ряд изнаночными петлями

25.05.2022 - 21:14

Country flag Monique wrote:

Est-ce qu'il y a le même modèle pour pointure plus grande ou quelle façon de faire ce modèle mais 3 points plus grands. Merci

27.04.2021 - 16:34

DROPS Design :

Bonjour Monique, ces chaussons ne sont disponibles que du 35 au 42. Parmi nos modèles de chaussons pour homme, vous trouverez des modèles jusqu'au 46. Bon tricot!

28.04.2021 - 08:15

Country flag Rachelle wrote:

Bonjour, Si je comprends bien, je commence les pantoufles par CHAUSSONS : jambe, pour grandeur 40, je met combien de mailles sur combien de broche. Que vient faire l'aiguille droite dans le projet ?? J'ai un peu de misère à comprendre le tout début. J'ai très hâte de commencé, elle son super belle. Merci! De votre aide

25.02.2020 - 01:50

DROPS Design :

Bonjour Rachelle, la taille 40 dans ce modèle est la 3ème taille, suivez les indications en 3ème position: montez 40 mailles et tricotez en rond pendant 4 cm, puis gardez les 11 premières m sur l'aiguille et glissez les 29 dernières mailles en attente etc... Bon tricot!

25.02.2020 - 09:39

Country flag Holloway Wilson wrote:

After casting on stitches. How are they divided on the double pointed needles

28.04.2019 - 19:27

DROPS Design :

Dear Mrs Wilson, this video shows how to cast on stitches on double pointed needles. Happy knitting!

29.04.2019 - 11:53

Country flag Vee wrote:

Hi there...where can I get the full pattern? I would very much like to knit the red slippers. Thanks Vee

17.02.2019 - 22:07

DROPS Design :

Dear Vee, you will find the written pattern and diagrams here. Happy knitting!

18.02.2019 - 11:17

Country flag ZARAT wrote:

Navrée mais ce n'est pas assez clair pour moi. Je détaille donc : Après les 7cm de pt mousse (aller/retour), j'ai relevé 12m (tricotées endroit), continué en reprenant et tricotant (maille endroit) les 27m en attente, et terminé par relever 12m (tricotées endroit). Le tour est-il fini ici, ou faut-il tricoter les 9m suivantes (de l'aller/retour) en maille endroit pour finir le tour ? Si tour fini, tour suivant en mailles envers pour tricoter en rond en plaçant les marqueurs ? Merci

12.12.2018 - 01:41

DROPS Design :

Bonjour Zarat, c'est tout à fait exact, votre tour commence à la première maille du dessus du pied, et se termine donc par la dernière maille relevée à droite de cette "'languette", vous tricotez le tour suivant en mailles envers pour continuer le point mousse. Bon tricot!

12.12.2018 - 10:17

Country flag Jessica wrote:

Why is there no sound

11.12.2018 - 06:58

DROPS Design :

Dear Jessica, We are a worldwide company and our videos are watched by people around the world, speaking different languages, many of whom do not understand English. We have therefore written instructions to accompany this video, and there is no sound to disturb while watching. Enjoy!

11.12.2018 - 10:05

Country flag Jessica wrote:

Why is there no sound

11.12.2018 - 06:57

DROPS Design :

Dear Jessica, We are a worldwide company and our videos are watched by people around the world, speaking different languages, many of whom do not understand English. We have therefore written instructions to accompany this video, and there is no sound to disturb while watching. Enjoy!

12.12.2018 - 10:14

Country flag Zarat wrote:

Bonjour (à nouveau) Merci pour la première réponse. Lorsqu'on a fait l'ajout des 12 m (pointure 35/37) de chaque côté et obtenu 60 m, quelle est la maille repère pour compter les tours à faire en point mousse en rond svp : à la 60ème maille ou le fil de départ qui marque le début du tricot (lors du montage des mailles) ? Merci d'avance pour les précisions.

10.12.2018 - 23:50

DROPS Design :

Bonjour Mme Zarat, la maille repère sera la 1ère du tour, si vous avez relevé/repris les mailles sans les tricoter, ce sera la 1ère maille de la pointe du pied (les mailles tricotées en allers et retours). Bon tricot!

11.12.2018 - 10:08

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to start a sock with a flounce
3:51
How to start a sock with a flounce

In this DROPS video we show how to start a sock with a flounce, like the “Dainty Duo” socks in DROPS 229-19. We cast on with 2 strands, but continue with 1 strand. Then we knit 4 rounds and on the next round we knit all stitches together 2 by 2. Then we work a rib (knit 1 twisted/purl 1). These socks are worked in DROPS Fabel, but in the video, we work with a thicker yarn; DROPS Snow. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work after charts to the socks in DROPS 229-20
11:52
How to work after charts to the socks in DROPS 229-20

In this DROPS video we show how we work after chart A.1 (flounces) and A.2 (lace pattern) to the “Kissing Kate” socks in DROPS 229-20. We show the beginning and end after chart A.1, and in chart A.2 we show round 3, 4, 9 and 10. We use less stitches than it says in the pattern. These socks are worked in DROPS Nord but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work the slippers in DROPS 203-37
20:51
How to work the slippers in DROPS 203-37

In this DROPS video we show how to work the “Carrot Squash” slippers in DROPS 203-37. We have already cast on stitches for size 35/37 = US 4.5/6.5 and start the video by showing round 1 (only Knit). Then the rib, K1, P1. After the rib put 31 stitches on a stitch holder, work the other stitches back and forth. Then work these stitches, the new pickup stitches along the sides and the stitches from the stitch holder, and work around again. Decrease stitches and work around to finish measurement, bind off and fold the slipper and sew under foot in the outermost loop of the outermost stitch. These slippers are worked in DROPS Snow, the same yarn we use in the video. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.