DROPS Super Sale - 6 popular yarns on sale all month!

How to sew / embroider back-stitch knot

Video thumbnail for How to sew / embroider back-stitch knot
In this DROPS video we show how to sew / embroider back stitch knots. Insert the needle from the wrong side and through to the right side where you wish the knot to be. Thread the needle back to the wrong side 0.5 – 1.5 stitches from where it originally came up. Sew up and down through the same holes as many times as is necessary to give the knot size you wish. We use the yarn DROPS Snow in the video. You must read a pattern using this technique to be able to follow this video properly. You’ll find a pattern by clicking on one of the pictures below.

Patterns using this technique

DROPS 225-3

DROPS 225-3
DROPS 222-50

DROPS 222-50
DROPS 222-48

DROPS 222-48
DROPS 222-44

DROPS 222-44
Change language:

Video #1660, listed in: Other techniques, Embroidery

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to make a decoration knot
1:27
How to make a decoration knot

In this DROPS video we show how to make a knot to be attached as a decoration to a Santa that is worked on a sweater. The same technique is also used to make a star at the top of a Christmas tree sweater. KNOT: Make a knot at the top of every Santa hat/ Christmas tree. Tie the knot around a stitch. Cut 2 lengths of color off white. approx. 10 cm = 4". Place strands together, use a needle and pull strands through the top off white stitch so that both yarn ends are on the right side of piece, on each side of stitch. Tie a knot, then tie another knot but in the opposite direction. Cut the yarn ends approx. ½ cm = 1/8" (Santa) / 1 cm = 2/8" (Christmas tree) long. These sweaters are worked in DROPS Air but in the video, we work with a thicker yarn; DROPS Snow., You must read the pattern to be able to follow this video properly. You’ll find a pattern by clicking on one off the picture below.
Video thumbnail for How to sew / embroider twisted chain stitch
2:25
How to sew / embroider twisted chain stitch

In this DROPS video we show how to sew / embroider twisted chain stitch. Insert the needle from the wrong side and through to the right side where you would like the chain stitch to begin. * Thread the needle down through the hole the strand came up through, then to the right side again approx. 2 cm = 3/4" further on – allow the strand to lie in a loop around the tip of the needle. Pick up the loop and twist it 2-3 times before laying it down again under the tip of the needle. Pull the strand through carefully, so the stitch is neat. If you want more stitches in height, repeat from the *. Finish by thread the needle through the piece approx. 0.5 stitches in front of the loop and pull it through to the wrong side. We use the yarn DROPS Snow in the video. You must read a pattern using this technique to be able to follow this video properly. You’ll find a pattern by clicking on one of the pictures below.
Video thumbnail for How to sew / embroider flat stitch
1:28
How to sew / embroider flat stitch

In this DROPS video we show how to sew / embroider flat stitch. Insert the needle from the wrong side to the right side, where you wish the stitch to start. Skip 0.5 - 1 cm = 1/8" - 3/8" and thread the needle down and up again to where you want the next flat stitch to start, pull the strand through. Skip 0.5 - 1 cm = 1/8" - 3/8" and thread the needle down and up again to where you want the next flat stitch to start, pull the strand through. Continue like this until you have enough stitches. We use the yarn DROPS Snow in the video. You must read a pattern using this technique to be able to follow this video properly. You’ll find a pattern by clicking on one of the pictures below.
Video thumbnail for How to sew / embroider back stitch
1:42
How to sew / embroider back stitch

In this DROPS video we show how to sew / embroider back stitches. Insert the needle from the wrong side and to the right side where you wish the stitch to start. Skip 1-1.5 cm = 3/8"-5/8", insert the needle down and then up to the right side again approx. 1 -1.5 cm = 3/8"-5/8" further on. Pull the strand through. You have worked a stitch with a gap to the next stitch. Insert the needle in the hole where the previous stitch ended and bring the needle up on the right side approx. 1 -1.5 cm = 3/8"-5/8" further on. Continue like this if you want several back stitches. When the last back stitch has been worked, insert the needle where the previous stitch ended. Pull the strand to the wrong side. Back stitch can be worked vertically, horizontally, diagonally and round in a circle. We use the yarn DROPS Snow in the video. You must read a pattern using this technique to be able to follow this video properly. You’ll find a pattern by clicking on one of the pictures below.
Video thumbnail for How to crochet eyes to a play mouse
3:24
How to crochet eyes to a play mouse

In this DROPS video we show how to crochet the eyes to the play mouse in DROPS Extra 0-1506. The eyes are crocheted by long single crochet in a stitch 2 rounds below. Crochet like this: Use Color 1 and work 1 single crochet in each of the first 8 single crochets, insert the hook in the next stitch on round 6 (= 2 rounds below), use Color 2 and pull this strand through the stitch, change back to Color 1 and pull the strand through the 2 loops on the hook (= 1 eye/1 long single crochet), work 1 single crochet in each of the next 6 single crochets with Color 1, insert the hook in the next stitch on round 6 (= 2 rounds below), use Color 2 and pull the strand through the stitch, change back to Color 1 and pull the strand through the 2 loops on the hook (= 1 eye/1 long single crochet), work 1 single crochet in each of the last 8 single crochets = 24 stitches. Fasten the Color 2 strand on the inside (wrong side) of the mouse. This mouse is worked in DROPS Lima, but in this video we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the pictures below.
Video thumbnail for How to make the face to the Santa jumper in DROPS Children 32-20
6:10
How to make the face to the Santa jumper in DROPS Children 32-20

In this DROPS video we show how to attach the beard, moustache and how we sew grafting stitches for the eyes in the Santa sweater in DROPS Children 32-20. BEARD: 1 fringe= 1 strand of 45 cm = 17 3/4" using off-white. Cut 18 fringes.Each fringe is fastened above the purled stitch on the neck of the Santa. Fold the fringe double, thread the loop around the stitch, then thread the strand-ends through the loop and tighten. Fasten a similar fringe in each of the 17 remaining stitches over the purled stitch. Then tie a loose knot using all the strands; tie the knot approx. in the middle of the strands. Trim the beard to the required length. MOUSTACHE: 1 fringe= 1 strand of 7 cm = 2 3/4" using off-white. Cut 8 fringes. Fold the fringes double and thread the loop around a stitch beneath a purled stitch on the face of Santa, then thread the strand-ends through the loop and tighten. Fasten a similar fringe beneath each of the purled stitches. Trim the moustache to the required length. EYES: Using a left-over of black, sew grafting stitches over 3 stitches and sew 1 stitch across the next stitch towards the middle. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.