How to work a cheat knot / hole to a scarf

In this DROPS video we show how we work a cheat knot / hole for a scarf, which is used in Baby DROPS 14-16. We have already worked a bit of a scarf and start the video where we split the work in two with a stitch holder. You must read the pattern to be able to follow this video properly. You’ll find a pattern with this technique by clicking on the picture below. We use the yarn DROPS Snow in the video.

Patterns using this technique

DROPS Baby 14-16

Video #1356, listed in: Learn to knit, Pattern tutorials, Baby & Children, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Odete Da Silva Pinto wrote:

Bom dia, pode deixar escrito, como fazer?, por gentileza? Quero aprender fazer , essa ponta do echarpe!

04.09.2024 - 14:59

Emmy Östman wrote:

Hej! När man stickat ena sidan av ”hålet”, och ska sticka upp andra sidan också. Tar man en ny tråd eller använder man samma? Kan ni beskriva mer hur detta moment går till, oavsett tillvägagångssätt.

12.02.2024 - 22:33

DROPS Design :

Hei Emmy. Det er valgfritt om du ønsker å klippe tråden etter 1.del av "hullet" er strikket eller om du ønsker å strikke 2. del av "hullet" med motsatt trådende av nøstet. Uansett hva du gjør blir det 2 tråder som må festet. I videoen fortsetter vi med tråden etter å ha delt arbeidet (se tidspunkt: 02:00). Når vi skal starte på del 2 bruker vi en ny tråd (se tidspunktet: 03:50), og når delene skal strikkes sammen igjen bruker vi tråden fra 1.del (se tidspunkt: 05:38). Da kan tråd fra del 2 klippes av. mvh DROPS Design

15.02.2024 - 09:21

Nicole Patureau wrote:

Bonjour j' aimerais avoir les explications écrites de l' écharpe à feuilles pour adulte S' il vous plâit Merci

08.08.2022 - 23:35

DROPS Design :

Bonjour Mme Patureau, vous trouverez ici la version adulte de cette écharpe. Bon tricot!

09.08.2022 - 09:13

Andrea Meinke wrote:

Vielen Dank für das tolle Video👏👏 Ohne Sprache super erklärt! Und somit universell 👍

22.01.2021 - 10:38

Hannelore Böhme wrote:

Leider gab das video keinen ton

18.01.2021 - 13:52

Maria Luciano wrote:

Muito bem explicado!

15.11.2020 - 01:15

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

Name:*

Is this a comment or a question?

Country:

Comment:*

15:52

How to work the slippers in DROPS Children 27-19

In this DROPS video we show to work the “Lemon Jelly” slippers in DROPS Children 27-19. By working with smaller needles than you normally do for DROPS Snow, you get a firmer slipper. But remember the needle size in the pattern are only the recommended size. We use needle 4 in the video and working according to size 20/21 (the smallest size). We have already cast on 24 stitches and show a bit of the 1st round which is knit and a bit of the 2nd round which is purled (= 1 RIGDE in garter stitch). Work garter stich until the piece measures 3 cm = 1 1/8". Then the first 8 stitches of the round are kept on the needle and the remaining 16 stitches are put on 1 thread. Cast on 1 stitch at the beginning and 1 stitch at the end of the 8 stitches on the needle. Work garter stich back and forth until the work measures 4 from where the stitches were put on 1 thread. Bind off 1 stitch in each side. Knit up 6 stitches in each side and put the stitches on the thread back on the needle. Put 1 marking thread in the middle of the front and 1 in the middle of the back. When the piece measures 2 from the marker threads, decrease 1 stitch on each side of the marker threads, decrease like this every other round until the piece measures 4 cm = 1 1/2". Then bind off the remaining stitches and sew the seam under the foot in outer loops of edge stitch. These slippers are worked in DROPS Snow, the same yarn we use in the video. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

27:18

How to decrease and increase to the hat in DROPS Baby 21-34

In this DROPS video we show how to increase and decrease by the stitch markers. We use a smaller number of stitches / rows than what is written in the pattern and we have already worked the first rows and put 7 stitch markers in the hat. The first and last stitch is knitted, both from RS and from WS. We start by showing how to increase stitches at 1st, 3rd, 5th and 7th mark and how to decrease 1 stitch on each side of stitch with marker at 2nd, 4th and 6th mark from RS. Then we show how to work the YO twisted from WS to avoid holes. Then we show 1 row from RS again, with inc and dec. When all inc have been worked, work rows with only dec (at markers 2, 4 and 6) until there are 15 stitches left. Work next row from RS as follows: K 1, K 2 tog, K 9, K 2 tog, K 1 = 13 sts. Repeat dec in each side on every row (from WS P the 2 sts before and after edge st tog) until 5 sts remain. On the last row from WS work 1 edge st, P 3 sts tog and work 1 edge st. Pull thread through the remaining stitch. Sew the hat together mid back inside 1 edge stitch. TIES: Cast on 4 stitches. Work as follows: * K 1, place yarn in front of piece (towards you), slip 1 st as if to P, place yarn behind piece (from you) *, repeat from *-* on more time and on all rows. Work to desired length and bind off. Sew the ribbon at the bottom of one tip on ear flap. This hat is worked in DROPS Alpaca, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

8:13

How to begin working the baby body in DROPS Baby 31-6

In this DROPS video we show how to start working the “Celestina” baby body in DROPS Baby 31-6. Work 4 parts of chart A.1, and then put 2 parts together and work after chart to A.2. This baby body is worked in DROPS Baby Merino, but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

13:58

How to work after chart to the baby mittens in DROPS Baby 36-10

In this DROPS video we show how to work after chart A.1 to the baby mittens “Tiny Mitts” in DROPS Baby 36-10. We work the smallest size and have already worked a rib and start the video by showing the four first round to the chart, we show the beginning and end of each round. Then we show the first decrease, both sides of the markers and then we show how to knit 2 and 2 stitches together when it is 8 stitches left. These mittens are worked in DROPS Baby Merino, but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the chart to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

How to work the decreases in DROPS Baby 33-36

In this DROPS video we show how to decrease after chart to the “New Chick” hat in DROPS Baby 33-66. We work 4 rapports of the chart and have already worked twice in the high. Decrease as follows: Slip stitch / YO before stitch with marker, knit stitch with marker + the next stitch together, pass the slipped stitch over (= 2 stitches decreased). Repeat this decrease on all repetitions at the 3 arrows. This hat is worked in DROPS BabyMerino, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the chart to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

4:41

How to end the raglan decreases on the front piece in DROPS Children 32-20

In this DROPS video we show the last two rows with raglan and neck decreases to the front piece in DROPS Children 32-20. The middle stitches are put on 1 thread for neck and each shoulder (5 stitches x 2) are worked separately. Left shoulder – start from the right side: 1 edge stitch in garter stitch, decrease for raglan as before (slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch), knit 2 stitches together (decrease for neck) = 3 stitches on needle, turn work. Purl from the wrong side, 1 edge stitch in garter stitch, turn work. 1 edge stitch in garter stitch, decrease for raglan = 2 stitches on needle. Turn and bind off stitches by purling. Work right shoulder from the right as follows: knit 2 stitches together (decrease for neck), decrease for raglan (knit 2 stitches together), 1 edge stitch in garter stitch (=3 stitches). Turn work and work 1 stitch in garter stitch, purl from the wrong side, turn work. Decrease for raglan, 1 edge stitch in garter stitch, turn work and bind off stitches by purling. We use the yarn DROPS Air in the video, the same yarn we use in the pattern. You must read the pattern to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.