DROPS / 190 / 27

Primrose Skirt by DROPS Design

Skirt with lace pattern, crocheted top down. Size: S - XXXL Piece is crocheted in DROPS Muskat.

Tags: lace, skirts, top down,
DROPS design: Pattern r-728
Yarn group B
Size: S - M - L - XL - XXL - XXXL
DROPS MUSKAT from Garnstudio (belongs to yarn group B)
400-450-500-550-600-650 g colour no 29, old pink

Piece can also be crocheted with yarn from:
“Alternative yarn (yarn group B)” - see link below.

DROPS CROCHET HOOK SIZE 4 mm - or size needed to get 18 treble crochets x 9 rows = 10 cm in width and 10 cm vertically.

DROPS MOTHER-OF-PEARL BUTTON ARCHED (white), NO 521: 4 pieces for all sizes

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Cotton
from 1.60 £ /50g
DROPS Muskat uni colour DROPS Muskat uni colour 1.60 £ /50g
Wool Warehouse Direct Ltd
DROPS Needles & Hooks
You can get the yarn to make this pattern from 12.80£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.

See diagrams A.1 and A.2. Diagram A.1 shows how round begins and ends. Begin and end 2nd and 6th round as follows:
Begin round with 1 slip stitch in each of the first 2 treble crochets and 3 chain stitch (replace first treble crochet), finish round with 1 slip stitch in 3rd chain stitch at beginning of round.
On 8th round do not replace the 3 chain stitches in A.1 with first treble crochet in A.2. On the remaining rounds first stitch in A.2 is replaced with A.1.

When working back and forth, work as follows:
Begin every treble crochet row with 3 chain stitches (replaces first treble crochet).
Begin every double crochet row with 1 chain stitch (does not replace first double crochet).
When working in the round, work as follows:
At beginning of every round with treble crochet replace first treble crochet with 3 chain stitches. Finish round with 1 slip stitch in 3rd chain stitch at beginning of round.
On every round with double crochets replace first double crochet with 1 chain stitch. Finish round with 1 slip stitch in first chain stitch at beginning of round.

Work 1 treble crochet in first treble crochet, work 2 treble crochets in next treble crochet (= 1 treble crochet increased), work 1 treble crochet in every treble crochet until 2 treble crochets remain before marker thread, work 2 treble crochets in next treble crochet (= 1 treble crochet increased), work 1 treble crochet in each of the next 2 treble crochets (marker thread is in the middle of these stitches), work 2 treble crochets in next treble crochet (= 1 treble crochet increased), work until 2 treble crochets on row/round, work 2 treble crochets in next treble crochet (= 1 treble crochet increased) and 1 treble crochet in next treble crochet (= 4 treble crochets increased in total on row/round).

Work top down. First work back and forth from vent in the side, then work in the round.
Work 153-169-186-207-232-258 chain stitches (including 3 chain stitches to turn with) on hook size 4 mm with Muskat. Work 1 treble crochet in 4th chain stitch from hook (= 2 treble crochets) - read CROCHET INFO, work 1 treble crochet in each of the next 2-4-0-0-4-2 chain stitches, * skip 1 chain stitch, 1 treble crochet in each of the next 6 chain stitches *, repeat from *-* =
= 130-144-158-176-198-220 treble crochets. Insert 1 marker thread after 65-72-79-88-99-110 stitches (= the side).
Continue with 1 treble crochet in every treble crochet. REMEMBER THE CROCHET TENSION!
When piece measures 5 cm, increase 1 treble crochet at beginning of row/round, 1 treble crochet on each side of marker thread and 1 treble crochet at the end of row/round (= 4 treble crochets increased) – read INCREASE TIP. Increase like this every 1½ cm 18-18-17-16-19-20 times in total = 202-216-226-240-274-300 treble crochets. AT THE SAME TIME when 9 rows with treble crochets have been worked, work in the round. When piece measures 33-35-37-39-41-43 cm, increase 2-0-2-0-2-0 treble crochets evenly on next round = 204-216-228-240-276-300 treble crochets.
When piece measures 34-36-38-40-42-44 cm, work A.2 over all stitches (= 34-36-38-40-46-50 times in width). Diagram A.1 shows how every round begins and ends. When A.2 has been worked 1 time vertically, piece measures approx. 46-48-50-52-54-56 cm. Fasten off.

Along the opening on front piece work buttonhole loops as follows (begin at the bottom): Fasten yarn with 1 slip stitch in first treble crochet, 1 chain stitch (does not replace first double crochet - remember crochet info), work 2 double crochets around first treble crochet, 3 chain stitches, skip 1 treble crochet, * work 2 double crochets around next treble crochet, 3 chain stitches, skip 1 treble crochet *, work from *-* 2 more times and finish with 2 double crochets around last treble crochet at the top, turn and work back as follows: 1 double crochet in every double crochet and 3 double crochets around every chain space. Fasten off.

Along the other side of the opening work 5 rows with double crochets back and forth (on 1st row work 2 double crochets around every treble crochet = 18 double crochets), fasten off. Sew the buttons on to the button folding edge.

Work an edge at top of waist on skirt as follows from right side: Fasten yarn with 1 slip stitch at the edge of button folding edge, 1 chain stitch, * 1 chain stitch, skip 1 chain stitch, 1 double crochet in next chain stitch *, work *-* along the entire waist, adjust to finish with 1 double crochet in last stitch. Fasten off.


= chain stitch
= double crochet in stitch
= double crochet between 2 treble crochets
= double crochet around chain space
= treble crochet in stitch
= treble crochet around chain stitch/chain space
= slip stitch

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 190-27) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (6)

Tamsin Davidson 09.12.2019 - 11:18:

Thank you for your response. On the Rav--- website, this pattern (and other DROPS design patterns) are in the category for teens aged 13-17 years old. The S size on your patterns is still too big for many teenagers though. How is the pattern converted to fit a 13 year old?

DROPS Design 09.12.2019 kl. 11:33:

Dear Mrs Davidson, this pattern can be made/worn for a teenager, but pattern starts with size S. We are unfortunately not able to adapt every pattern to every single request; should you need any assistance to adapt this pattern, please contact your DROPS store - even par mail or telephone. Happy crocheting!

Tamsin 08.12.2019 - 11:05:

I would like to crochet a skirt for waist measurement of 60cm or 23.6 inches and hips 70cm or 27.5 inches. The size S waist measurement on the Primrose pattern is 36 inches and, for example, size S hip on Rosalina is 47 inches . Can you please clarify the sizing of your patterns for teenagers? Thanks so much.

DROPS Design 09.12.2019 kl. 09:14:

Dear Tamsin, the measurement in chart are given in cm - convert here into inches - compare a similar garment the girl has and likes the shapes and compare these to the measurements in chart. Happy crocheting!

Tamsin 08.12.2019 - 10:57:

I am trying to ask a question about your skirt sizing for teenagers, but I receive an error "Your comment contains links or forbidden words!" - which it doesn't. I'm not sure why the error appears. Can I email you my question instead perhaps? Thanks for your help.

Sarah 08.12.2019 - 10:54:

Lovely skirt!

Eva 18.09.2019 - 16:04:

Quisiera añadirlo a favoritos pero no encuentro la manera. Gracias

DROPS Design 18.09.2019 kl. 20:08:

Hola Eva. Para añadir a favoritos un patrón tienes que pulsar el corazón que estça al lado del botón de imprimir y seguir las instrucciones.

María 03.08.2018 - 02:25:

Hola, Me gusta mucho esta falda pero ya no soy una jovencita ¿cómo puedo saber cuál es mi talla? y si quiero alargar la falda hasta la rodilla ¿sigo haciendo los mismos puntos y luego el calado? porque temo que me quede en forma de mucha campana. Gracias anticipadas. Un abrazo María

DROPS Design 07.08.2018 kl. 18:31:

Hola Maria. Puedes calcular tu talla por las medidas que vienen en el diagrama bajo el patrón. Para alargar la falda y que no quede en forma de campana, hay que aumentar, en vez de cada 1.5 cm, cada 2 - 2.5 cm dependiendo de la largura que quieras. Así se puede alargar sin que quede tan acampanada.

Post a comment to pattern DROPS 190-27

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.