DROPS / 170 / 2

Janis by DROPS Design

Crochet DROPS jumper worked in a square with flounce sleeves and lace pattern in ”Paris”. Size: S - XXXL.

DROPS design: Pattern no w-573
Yarn group C or A + A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS PARIS from Garnstudio
600-650-750-800-900-950 g colour no 16, white

DROPS CROCHET HOOK SIZE 4.5 mm – or size needed to get 16 tr x 9 rows = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (152) FAQ

100% Cotton
from 0.95 £ /50g
DROPS Paris uni colour DROPS Paris uni colour 1.05 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Paris recycled denim DROPS Paris recycled denim 0.95 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 11.40£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
MAGIC CIRCLE:
To avoid hole in the middle beg with this technique:
Hold yarn end in the left hand and make a loop around left index finger (from left to right). Hold the loop with left thumb and index finger. Insert hook through loop, get the yarn from ball, pull yarn through loop, make 1 YO on hook and pull YO through st on hook = 1 dc, then work 8 dc around loop, finish with 1 sl st in first dc = 9 dc. Continue as explained in pattern – AT THE SAME TIME pull yarn end so that loop is tighten tog and the hole disappears.

CROCHET INFO:
Replace first dc on round with 1 ch. Finish round with one sl st in first ch from beg of round.
Replace first tr on round/row with 3 ch. Finish round with one sl st in third ch from beg of round.

PATTERN:
See diagrams A.1 to A.4.

QUADRUPLE TR: Make 4 YOs on hook, insert hook around ch-space and pull yarn around ch-space, * 1 YO on hook, pull yarn through the next 2 loops on hook *, repeat from *-* 4 more times = 1 loop on hook.

DECREASE TIP:
Dec 1 tr by working the next 2 tr tog as follows: Work 1 tr but wait with last pull through (= 2 loops on hook), then work next tr but on last pull through, pull yarn through all 3 loops on hook.
----------------------------------------------------------

JUMPER:

BACK PIECE:
Work back piece in a circle, then as a square from mid back. Work up along one side of square for shoulder/neck at the end.
Work a MAGIC CIRCLE on hook size 4.5 mm with Paris – see explanation above = 9 dc around circle. Then work according to A.1 (on first round in A1 work 2 dc in each of the 9 dc = 18 dc). REMEMBER THE CROCHET TENSION! READ CROCHET INFO! When A.1 has been worked, there are 120 tr on round and piece measures approx. 22 cm in diameter.

Then work according to A.2, work 4 repetitions of A.2 around the circle - beg on second round in A.2. NOTE: Sl sts at beg of A.2 are only worked at beg of round.

When A.2 has been worked, continue according to A.3. A.x shows 1 repetition of A.3 in width. Work A.3, in every corner work 1 dtr + 3 ch + 1 dtr, work 2 repetitions more of A.3 between every corner for every round worked. Continue with A.3 until piece measures 23-25-27-29-33-36 cm from centre (46-50-54-58-66-72 cm in total), there are now approx. 18-20-22-24-28-30 repetitions of A.3 along each side of square. Now work piece back and forth and dec for neck in the middle of the first side of square. Cut the yarn and skip the middle 6-6-8-8-10-10 repetitions (= neck) on the first side of square, continue A.3 with inc in the corners until row has been worked, do not work over the 6-6-8-8-10-10 repetitions skipped at beg of row. Fasten off, piece measures 25-27-29-31-35-38 cm from centre (50-54-58-62-70-76 cm in total), there are approx. 7-8-8-9-10-11 repetitions on each shoulder, and approx. 20-22-24-26-30-32 repetitions along each of the other 3 sides. Insert 1 marker in each side, 16-17-18-19-20-21 cm down from shoulder, this shows where sleeve is sewn in.

FRONT PIECE:
Work as back piece until piece measures 17-19-21-23-27-30 cm from centre (32-36-40-44-52-58 cm in total), there are now approx. 14-16-18-20-24-26 repetitions of A.3 along each side of square. Now work piece back and forth and dec for neck in the middle of the first side of square. Cut the yarn and skip the middle 2 repetitions (= neck) on the first side of square, continue with A.3 with inc in the corners until row has been worked, do not work over the 2 repetitions skipped at beg of row. Turn and work a row from WS. Cut the yarn, skip the first 2-2-3-3-4-4 repetitions, continue with A.3 and inc in the corners, but turn when 2-2-3-3-4-4 repetitions remain on row, 6-6-8-8-10-10 repetitions have been dec mid front for neck. Continue back and forth with A.3 and inc until piece measures 25-27-29-31-35-38 cm from centre (50-54-58-62-70-76 cm in total), there are approx. 7-8-8-9-10-11 repetitions on each shoulder, and approx. 20-22-24-26-30-32 repetitions along each of the other 3 sides, adjust according to back piece. Fasten off. Insert 1 marker in each side, 16-17-18-19-20-21 cm down from shoulder, this shows where sleeve is sewn in.

SLEEVE:
Sleeve is worked in the round, top down. Work 64-64-69-69-74-74 ch and form a ring with one sl st in first ch. Work 3 ch (= 1 tr), 1 tr in each of the next 6-6-3-3-0-0 ch, skip 1 ch, * work 1 tr in each of the next 7 ch, skip 1 st *, repeat from *-* the entire round = 56-56-60-60-64-64 tr. Remember CROCHET INFO! Then work in the round and according to A.3. On 3rd round in A.3 dec 8 tr evenly - READ DECREASE TIP. Repeat dec every time 3th round in diagram is worked 3 times in total = 32-32-36-36-40-40 tr. Work A.3 until piece measures 33-32-31-30-27-25 cm, finish after 2nd or 4th round in A.3. Work 40-40-40-48-48-48 tr in total around ch-spaces. Then work according to A.4 (5-5-5-6-6-6 repetitions in width, diagram shows 2 repetitions in width), work first round as follows: * Work 1 tr in each of the first 7 tr, 1 ch, skip 1 tr *, repeat from *-* 4-4-4-5-5-5 more times. NOTE: Sl sts at beg of A.4 are only worked at beg of round. Work A.4 1 time vertically. Work now 1 round with tr: 1 tr in each tr, 3 tr around each ch-space. Fasten off. Sleeve measures approx. 48-47-46-45-42-40 cm. Work another sleeve the same way.

ASSEMBLY:
Sew the shoulder seams. Sew side seams from markers in the side and down. Sew in sleeves.

TWINED STRING:
Cut 2 lengths of 3 metres each. Twine the strands tog until they resist, fold the string double so that it twines again. Make a knot at each end. Thread tie up and down around the neck. Cut 8 lengths of yarn of 20 cm. Thread the ends through the end of the tie and fold them double. Twine one of the strand around the top of tassel. Make another fringe in the other end of tie.

This pattern has been corrected. .

Updated online: 17.05.2017
SLEEVE: ..... NOTE: Sl sts at beg of A.4 are only worked at beg of round. Work A.4 1 time vertically. Work now 1 round with tr: 1 tr in each tr, 3 tr around each ch-space. Fasten off. Sleeve measures approx. 48-47-46-45-42-40 cm. Work another sleeve the same way.
Updated online: 07.08.2017
Correction on last round in A.2.

Diagram

= make a magic circle - see explanation in pattern
= ch
= sl st
= dc around ch-space
= dc in third ch at the top of picot
= htr around ch-space
= tr in st
= tr around ch-space
= dtr around ch-space
= dtr in st
= triple tr around ch-space
= quadruple tr around ch-space - see explanation in pattern
= picot: work 3 ch, 3 tr in first ch
= this round has already been worked
= work 2 tr tog




Sandra 16.08.2019 - 17:08:

Hallo. Wie kann ich die Teile denn am besten zusammennähen bzw. zusammenhäkeln? Hab mir gerade das Tutorial Häkelquadrate zusammennähen angeschaut. Ist das der beste Weg? Vielen Dank.

DROPS Design 19.08.2019 kl. 08:43:

Liebe Sandra, Sie können wie in diesem Videdozusammennähen, oder auch die Teilen mit Ketmaschen zusammenhäkeln, wie Sie am besten möchten. Viel Spaß beim häkeln!

Sandra 14.08.2019 - 15:20:

Hallo. Ich habe eine Frage zum Ärmel. Bei A3 werden in der dritten Runde insgesamt dreimal 8 Stb gleichmäßig abgenommen. D.h. die anschließenden Runden werden genauso weiter gehäkelt? Bis auf dass das Stb in Runde vier zum Beispiel in das zweite Stb anstatt das dritte Stb um den Lm Bogen eingestochen wird. Ist das korrekt?

Sandra 14.08.2019 kl. 15:59:

Die Frage hat sich erledigt. Danke

Elisabeth Adam 03.08.2019 - 10:41:

Beim rückenausschnitt wird nach der ersten Runde umgedreht? Und die zweite Reihe von A 3 gehäkelt ? Oder ? Es soll ja 1x A 3 gehäkelt werden . Oder die 2. Reihe neu ansetzen

DROPS Design 04.08.2019 kl. 09:03:

Liebe Frau Adam, Sie setzen für den Halsausschnitt des Rückenteils den Faden wie beschrieben neu an und häkeln nur noch 1 Reihe von A.3, das machen Sie von der Vorderseite. Beim Rückenteil muss also nicht gewendet werden, da nur 1 Reihe gehäkelt wird. Die mittleren Stäbchen der oberen Seite bleiben für den Halsausschnitt unbehäkelt. Beim Vorderteil wird dann jeweils gewendet, weil für den tieferen Halsausschnitt mehr Reihen von A.3 gehäkelt werden. Viel Spaß beim Weiterhäkeln!

Elisabeth Adam 03.08.2019 - 10:41:

Beim rückenausschnitt wird nach der ersten Runde umgedreht? Und die zweite Reihe von A 3 gehäkelt ? Oder ? Es soll ja 1x A 3 gehäkelt werden . Oder die 2. Reihe neu ansetzen

DROPS Design 04.08.2019 kl. 09:03:

Antwort siehe oben! :-)

Gerrie Donkers 26.07.2019 - 11:24:

Ik ben klaar met a3 tot aan dat ik nu op en neer moet gaan haken en minderen in het midden van het vierkant. Ik snap niet hoeveel ik moet minderen en hoeveel toeren ik dit moet doen.

DROPS Design 11.08.2019 kl. 16:42:

Dag Gerrie,

Je haat gewoon verder in A.3, maar je haakt niet over de middelste 6-6-8-8-10-10 patroonherhalingen. Dus je knipt de draad af, slaat het betreffende aantal herhalingen over en dan ga je verder met A.3 over de rest. Dit geldt voor het achterpand.

Bij het voorpand begin je eerder qua hoogte (zoals aangegeven) en sla je eerst minder patroon herhalingen en haak je over steeds minder patroonherhalingen door eerder het werk te keren, dan wel de draad af te knippen.

Sandra 17.07.2019 - 11:19:

Hallo. Ich habe ein Frage zum Muster A3. Ich hab mir zwar gerade das Video angesehen bin mir aber nicht ganz sicher. Die zweite Runde beginnt mit 2 Luftmaschen aber zwischen den festen Maschen werden dann immer 4 Luftmaschen gehäkelt oder? Nicht 2 und 4 im Wechsel. Und ich nehme an das gleiche gilt für die dritte Runde. Nur zu Beginn 2 Stäbchen und dann immer 4 Stück um die lm Kette. Vielen Dank

DROPS Design 17.07.2019 kl. 11:26:

Liebe Sandra, ja genau es sind 4 Lm zwischen den festen maschen, dh: 2 Luftmaschen am Anfang von A.x + 2 Luftmaschen am Ende von A.x sind 4 Luftmaschen für jeden Luftmaschenbogen (mit 1 feste Masche dazwischen). Viel Spaß beim häkeln!

Myriam 30.04.2019 - 20:26:

Als ik voor de mouw 8 stokjes minder in rij 3 en daarna weer doorga met rij 4 blijft het patroon toch even breed? Hoe minder ik de stokjes zodat de mouw daadwerkelijk smaller wordt?

DROPS Design 05.05.2019 kl. 17:59:

Dag Myriam,

Je mindert steeds 8 stokjes in de mouw en dat betekent dat je dientengevolge in de toer daarna 2 patroonherhalingen van A.x minder breit over de hele toer.

Birhit 23.11.2018 - 13:04:

Danke für die schnelle Antwort, auch auf den Schultern noch eine Reihe Stäbchen? LG

DROPS Design 23.11.2018 kl. 15:10:

Liebe Birgit, also am besten mit den Maßnahmen anpassen, sollte es etwas zu lang für die Schulter sein, können Sie diese Reihe Stäbchen dann nur unten häkeln. Viel Spaß beim häkeln!

Birgit 23.11.2018 - 00:21:

Hallo, laut Anleitung endet der Rücken mit der zweiten Reihe von A3. auf dem Bild sieht man jedoch dass die letzte Reihe Stäbchen sind, wann werden diese gehäkelt? Danke und liebe Grüsse

DROPS Design 23.11.2018 kl. 11:59:

Liebe Birgit, einfach A.3 nach einer Reihe mit Stäbchen (= Reihe 3 in A.3) enden. Viel Spaß beim häkeln!

Diana Duke 27.10.2018 - 08:29:

I, like Sharon Kerr, am having issues with A2... There is not sufficient information in the chart to allow for pattern growth, and the picture of the cardigan is not high enough quality to figure it out by zooming in. Could you please release either a new video tutorial or a new chart that has been fixed? Thank you for your time.

DROPS Design 29.10.2018 kl. 07:58:

Dear Mrs Duke, start A.2 on the row after the star and, reading from the right towards the left repeat A.2 a total of 4 times in width on every round as shown in diagram. Should you need any further assistance reading diagram you are welcome to contact the store where you bought theh yarn. Happy crocheting!

Post a comment to pattern DROPS 170-2

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.