DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 2.55 € /50g
DROPS Kid-Silk
DROPS Kid-Silk
75% Mohair, 25% Silk
from 3.55 € /25g
Get the yarn to make this pattern from 6.10€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

The Bunny Bunch

Knitted bunny for babies and children in DROPS Alpaca and DROPS Kid-Silk or 1 strand DROPS Brushed Alpaca Silk. The piece is worked back and forth in garter stitch. Theme: Soft toys.

DROPS Baby 46-18
DROPS Design: Pattern z-115-by
Yarn group A + A or C
-----------------------------------------------------------

SIZE:
Length: approx. 22 cm.

YARN:
Alternative 1:
DROPS ALPACA from Garnstudio (belongs to yarn group A)
50 g colour 100, off white
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
25 g colour 44, moonlight

Alternative 2:
DROPS ALPACA from Garnstudio (belongs to yarn group A)
50 g colour 100, off white
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
25 g colour 01, off white

Alternative 3:
DROPS ALPACA from Garnstudio (belongs to yarn group A)
50 g colour 9020, light pearl grey
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
25 g colour 44, moonlight

Alternative 4:
DROPS BRUSHED ALPACA SILK from Garnstudio (belongs to yarn group C)
25 g clolour 01, off white

And use:
Left over colour grey, brown or black for eyes and nose.


NEEDLES:
DROPS SINGLE POINTED NEEDLES SIZE 3.5 MM

ACCESSORIES:
Wadding.

KNITTING TENSION:
22 stitches in width and 45 rows in height with garter stitch using DROPS Alpaca and DROPS Kid-Silk (held together) or 1 strand DROPS Brushed Alpaca Silk = 10 x 10 cm.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 2.55 € /50g
DROPS Kid-Silk
DROPS Kid-Silk
75% Mohair, 25% Silk
from 3.55 € /25g
Get the yarn to make this pattern from 6.10€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:
-------------------------------------------------------

RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge = knit 2 rows.

PATTERN:
See diagrams A and B. The diagrams show how to work the embroidered stitches.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

BUNNY – SHORT OVERVIEW OF THE PIECE:
The piece is worked back and forth, top down in GARTER STITCH – read description above.
The ears are worked first, then the head and body.

FIRST EAR:
Cast on 5 stitches with needle size 3.5 mm, 1 strand DROPS Alpaca and 1 strand DROPS Kid-Silk (held together) or 1 strand DROPS Brushed Alpaca Silk:
ROW 1: Knit.
ROW 2: Knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1 = 9 stitches.
ROW 3: Knit, knit yarn overs twisted to avoid holes.
ROW 4: Knit 1, 1 yarn over, knit 2, 1 yarn over, knit 3, 1 yarn over, knit 2, 1 yarn over, knit 1 = 13 stitches.
ROWS 5- 22: Knit, knit yarn overs twisted to avoid holes (the piece measures approx. 5 cm).
Cut the strand. Leave the stitches on the needle and work the second ear.

SECOND EAR:
Cast on and work in the same way as the first ear. Do not cut the strand. Cast on 1 stitch at the end of the last row. REMEMBER THE KNITTING TENSION!

HEAD:
Turn, knit the stitches from the second ear, cast on 2 stitches, knit the stitches from the first ear, cast on 1 stitch = 30 stitches.
Work 4 ridges back and forth over all stitches.

NOSE:
Increase for the nose as follows:
ROW 1: Knit 13, 1 yarn over, knit 4, 1 yarn over, knit 13 = 32 stitches.
ROW 2: Knit 13, knit the yarn over twisted (no hole), 1 yarn over, knit 4, 1 yarn over, knit the yarn over twisted (no hole), knit13 = 34 stitches.
ROWS 3-5: Knit, yarn overs knitted twisted to avoid holes .
Now decrease as follows:
ROW 1: Knit 13, knit 2 together, knit 4, knit 2 together, knit 13 = 32 stitches.
ROW 2: Knit 12, knit 2 together, knit 4, knit 2 together, knit 12 = 30 stitches.
ROW 3: Knit 11, knit 2 together, knit 4, knit 2 together, knit 11 = 28 stitches.
ROW 4: Knit 10, knit 2 together, knit 4, knit 2 together, knit 10 = 26 stitches.
ROW 5: Knit 9, knit 2 together, knit 4, knit 2 together, knit 9 = 24 stitches.
ROWS 6-10: Knit.

FRONT LEGS:
On the next row:
Knit 9 (body), cast on 4 stitches for the first front leg, turn and work garter stitch back and forth over the outermost 8 stitches for 7 cm. Cast off these 8 stitches with knit from the right side, cut the strand, leaving an end of 25 cm (used when assembling). The first front leg is finished.
Knit the next 10 stitches (body), cast on 4 stitches for the second front leg, turn and work garter stitch back and forth over the outermost 8 stitches for 7 cm. Cast off these 8 stitches with knit from the right side, cut the strand, leaving an end of 25 cm (used when assembling). The second front leg is finished.
Knit the last 5 stitches (body). Turn.

BODY:
ROW 1 (wrong side): Knit 5 (body), fold the front leg double so you can knit up 1 stitch in each of the 4 cast-on stitches on the front leg, skip the next 4 front-leg stitches, knit 6 (between the legs), fold the second front leg double and knit up 1 stitch in each of the 4 cast-on stitches on the front leg, skip the next 4 front-leg stitches, knit the last 5 stitches (body) = 24 stitches.
Now increase for the tummy:
ROW 2: Knit and increase 8 stitches evenly on the row – increase with yarn overs which are knitted twisted on the next row to avoid holes = 32 stitches.
ROWS 3-7: Knit.
ROW 8: Knit and increase 6 stitches evenly on the row – increase with yarn overs which are knitted twisted on the next row to avoid holes = 38 stitches.
ROWS 9-14: Knit.
ROW 15: Knit and increase 6 stitches evenly on the row – increase with yarn overs which are knitted twisted on the next row to avoid holes = 44 stitches.
ROW 16: Knit.
Continue with garter stitch until the body measures 7 cm (approx. 15 -16 ridges), and the next row is from the wrong side.
Now decrease below the tummy as follows:
ROW 1: Knit 3, knit 2 together, knit 5, knit 2 together, knit 5, knit 2 together, knit 5, knit 2 together, knit 5, knit 2 together, knit 5, knit 2 together, knit 4 = 38 stitches.
ROWS 2-4: Knit.
ROW 5: Knit 3, knit 2 together, knit 4, knit 2 together, knit 4, knit 2 together, knit 4, knit 2 together, knit 4, knit 2 together, knit 4, knit 2 together, knit 3 = 32 stitches.
ROWS 6-8: Knit.
ROW 9: Knit 3, knit 2 together, knit 6, knit 2 together, knit 6 knit 2 together, knit 6, knit 2 together, knit 6, knit 2 together, knit 6, knit 2 together, knit 3 = 28 stitches.

BACK LEGS:
The piece is now measured from here!
Work garter stitch for 4 cm (approx. 8-9 ridges) and cast off loosely.

EMBROIDERING:
Use left-over colour grey, brown or black. Work 1 French knot for each eye, above the nose - see diagram A. Work the nose with 2 flat stitches (2 cm long) across each nose section - see diagram B; the flat stitches should cross. Work 1 small flat stitch (½ cm) crossing the middle of the other 2 flat stitches.

ASSEMBLY:
Sew each ear in the outermost loop of the outermost stitch, filling with wadding as you go. Sew the opening at the top of the head and continue down the back, sewing in the outermost loop of the outermost stitch, filling with wadding as you go.
Sew the cast-off edges together at the bottom, sewing from side to side, making sure the seam meets mid-back. Sew a 4 cm seam along the middle to divide the legs, sewing through both layers and the wadding.
Sew each front leg, sewing in the outermost loop of the outermost stitch, filling with wadding as you go. Tack a strand through the stitches at the bottom of each front leg, tighten and fasten well.

Diagram

symbols = French knot, Pictures 1-4
PICTURE 1: Insert the needle from the wrong side and up to the right side where you would like the French knot to be positioned.
PICTURE 2: Wind the strand around the end of the needle 2 to 4 times – depending on how big you wish the knot to be.
PICTURE 3: Thread the needle down, 0.5-1 stitches away from where the strand came up and pull it out on the wrong side.
PICTURE 4: Pulling the strand through the material fastens the French knot. Fasten the strand on the wrong side.
symbols = Flat stitch, Pictures 1-4
PICTURE 1: Insert the needle from the wrong side to the right side, where you wish the stitch to start.
PICTURE 2: Skip 0.5 - 1 cm and thread the needle down and up again to where you want the next flat stitch to start, pull the strand through.
PICTURE 3: Skip 0.5 - 1 cm and thread the needle down and up again to where you want the next flat stitch to start, pull the strand through.
Continue like this until you have enough stitches. Fasten the strand on the wrong side.
PICTURE 4: Flat stitches of different lengths and in different directions
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Post a comment to pattern DROPS Baby 46-18

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (20)

country flag Lorraine Schmaltz wrote:

I am also struggling with Row 1 of the Body - have tried over and over - not one to give up, I would love to figure out this row. Is there a video?

07.05.2024 - 01:08

DROPS Design answered:

Dear Mrs Schmaltz, knit the first 5 stitches, then fold the first arm and pick up 1 stitch in each of the 4 stitches cast on for the arm, then skip the next 4 sts on arm (they will be sewn later), knit the middle 6 sts between arms, pick up 1 stitch in each f the 4 sts of 2nd arm, skip the next 4 sts on 2nd arm and knit the 5 last stitches. There are now 2 small holes under arms, they will be closed afterward with a seam. Happy knitting!

07.05.2024 - 08:02

country flag Mathilda Bergsmo wrote:

Jag skulle önska att dat fanns mer bilder på hur kaninen ser ut efter varje steg eller att det finns en video på hur man ska göra denna. Jag har lite problem med armarna. När det står ytterst på stickan är det där man har lagt upp 4 st nya maskor eller är det längst ut på arbetet?

17.03.2024 - 14:59

country flag Astaara wrote:

It's ridiculous people are claiming that this is the same as the other pattern. Never mind the fact that a 2D Bunny design has been around for decades and there's only so much variation that can exist, the two patterns are very clearly different

05.03.2024 - 01:44

country flag Charlie Knight wrote:

I love this rabbit, but what alarms me is the reason I love it so much. This rabbit is astonishingly like Cottontail Rabbit designed by Erika Knight in 2016 which I was so fond of. I sincerely hope DROPS isn’t claiming that pattern for their own credit. Shame

04.03.2024 - 13:54

country flag Arabella Harris wrote:

This design bears more than a passing resemblance to the cottontail rabbit pattern by designer Erika Knight. It is deeply concerning to see DROPS misusing a free pattern by an independent designer and disappointing that your in house team would not uphold standards of design originality . I would be grateful for your response. Kind regards, Arabella

04.03.2024 - 11:39

country flag Peter wrote:

Thank you so much so providing an answer on those front legs. I'm so happy this piece can be finished!!

03.03.2024 - 20:59

country flag Peter wrote:

On the folded leg part- am I supposed to fold over the leg and knit the leg to those extra 4 casted on stitches? Or am I folding the leg to simply move it out of the way and just knit the row straight. Very confused here as to what's going on with the legs. Can anyone add clarity? Because what's written outright in the instructions is not a good explanation, sorry. Otherwise, the rest I understand fine.

01.03.2024 - 22:22

DROPS Design answered:

Dear Peter, you should have the row as follow: 5 body stitches, 2nd front leg (4 cast on stitches + 4 stitches from body), 6 body stitches in between, 1st front leg (4 cast on stitches + 4 stitches from body), 5 body stitches. Work over the first 5 stitches, now fold the leg in length (so, instead of 7cm long, the leg should be 3.5cm long) and work over the first 4 stitches through both loops (so the folded leg is firmly joined to the body) skip the next 4 stitches, work over the 6 stitches in between the legs, fold the next leg as the previous one and work again over the first 4 stitches of this leg. Skip the next 4 stitches and work over the last 5 stitches. Happy knitting!

03.03.2024 - 19:34

country flag Adèle wrote:

Bonjour ! Une question bête : peut on facilement laver le doudou en machine ou à la main et /ou faut il enlever le rembourrage avant ? Merci

15.02.2024 - 15:29

DROPS Design answered:

Bonjour Adèle, tout dépend du matériel utilisé, aussi bien de la laine choisie (lisez attentivement les consignes d'entretien de ces 2 laines par exemple) aussi bien que du rembourrage choisi. Bon tricot!

16.02.2024 - 07:21

country flag Sandra wrote:

Bonjour, c est peut être une question bête ! Mais après avoir fait la première patte avant , j ai coupé le fil en gardant 25 cm , mais du coup pour continuer sur le corps puis la deuxième patte je n ai plus de fil ! 😅 comment fait on dans ces cas là ! Merci !! 🙏

28.01.2024 - 17:02

DROPS Design answered:

Bonjour Sandra, joignez le fil sur l'endroit et tricotez les 10 mailles centrales du corps et continuez comme indiqué pour la 2ème patte. Après la 2ème patte avant, vous coupez le fil, et joignez le fil à nouveau pour tricoter les 5 dernières mailles du corps. Bon tricot!

29.01.2024 - 12:21

country flag Fleur wrote:

Kan ik ergens een uitleg met foto’s en/of video’s vinden? De uitleg van de voorste poten is niet heel duidelijk. Ik brei dus 9 steken naar binnen, richting lijf? En dan 4 steken erbij in het “midden” en dan het werk omdraaien? Klopt het dat er dan een gat zit? Lijkt me niet kloppen. Helemaal in de war met dit stuk. SOS

04.12.2023 - 11:39