DROPS / 171 / 21

Fall Festival by DROPS Design

Crochet DROPS jacket worked in a circle in "Big Delight". Size: S - XXXL.

DROPS design: Pattern no db-065
Yarn group C or A + A
----------------------------------------------------------
Size: S/M - L/XL - XXL/ XXXL
Materials:
DROPS BIG DELIGHT from Garnstudio
500-600-700 g colour no 06, autumn forest

DROPS CROCHET HOOK SIZE 5.5 mm – or size needed to get 13 tr x 8 rows = 10 x 10 cm.

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (168)

100% Wool
from 2.75 £ /100g
DROPS Big Delight print DROPS Big Delight print 2.75 £ /100g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 13.75£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
PATTERN:
See diagrams A.1 to A.5.

CROCHET INFO:
Replace first dc at beg of round with 1 ch, finish round with 1 sl st in 1st ch at beg of round.
Replace first tr at beg of round with 3 ch, finish round with 1 sl st in 3rd ch from beg of round.
Replace first dtr at beg of round with 4 ch, finish round with 1 sl st in 4th ch from beg of round.
----------------------------------------------------------

JACKET WORKED IN A CIRCLE:
Crochet 4 ch on hook size 5.5 mm with Big Delight and form a ring with 1 sl st in first ch. Then work according to A.1. READ CROCHET INFO! REMEMBER THE CROCHET TENSION!
When A.1 has been worked, circle measures approx. 33 cm in diameter and there are 27 dtr-groups on round.

Size L/XL-XXL/XXXL: Work according to A.2, on first round in A.2 inc 9 ch-spaces evenly (inc the same way as on 6th round in A.1, inc 1 ch-space as follows: Work 1 dc around ch-space in the middle of dtr-group, 9 ch, 1 dc around ch between dtr-groups, 9 ch, 1 dc around ch-space in the middle of next dtr-group) = 36-36 ch-spaces. Work A.2 1 time vertically.

ALL SIZES: = 27-36-36 dtr-groups. Work next round as round 1 in A.3, AT THE SAME TIME work armholes as follows:
1 dc around ch-space in the middle of dtr-group, work 30-33-36 loose ch, skip 5-6-7 dtr-groups, 1 dc around ch-space in the middle of next dtr-group (armhole has been worked), * 12 ch, 1 dc around ch-space in the middle of next dtr-group *, repeat from *-* 8-14-12 times in total, work 30-33-36 loose ch, skip 5-6-7 dtr-groups, 1 dc around ch-space in the middle of next dtr-group (another armhole has been worked), * 12 ch, 1 dc around ch-space in the middle of next dtr-group *, repeat from *-* the entire round and finish with 1 sl st in first dc at beg of round (instead of 1 dc around next ch-space).

Work next round as round 2 in A.3 as follows: Work the same way as before with 2 tr + 2 ch + 2 tr around every ch-space, around every ch-space for armhole work 6-7-8 tr-groups, AT THE SAME TIME inc 9 tr-groups evenly on round, inc 1 tr-group by working 2 tr + 2 ch + 2 tr + 2 tr + 2 ch + 2 tr around 1 ch-space = 36-45-45 tr-groups.
ROUND 3: Work 2 dtr + 2 ch + 2 dtr around ch-space in the middle of every tr-group and 1 ch between every dtr-group = 36-45-45 dtr-groups with 1 ch between each.

Continue to work according to A.3, AT THE SAME TIME inc 9 ch-spaces evenly every time 1st round is worked, as follows:
ROUND 1: Work sl sts until middle of first ch-space (in the middle of a dtr-group), 1 dc, * 12 ch, 1 dc around next ch-space in the middle of a dtr-group *, repeat from *-* the entire round AT THE SAME TIME inc 9 ch-spaces evenly on round = 45-54-54 ch-spaces (finish round with 6 ch and 1 triple tr in first dc at beg of round).
ROUND 2: Work 2 tr + 2 ch + 2 tr around every ch-space the entire round = 45-54-54 tr-groups.
ROUND 3: Work 2 dtr + 2 ch + 2 dtr around every ch-space in tr-group and 1 ch between every dtr-group the entire round = 45-54-54 dtr-group with 1 ch between each.

Repeat 1st-3rd round 3-3-4 more times, AT THE SAME TIME inc 9 ch-spaces every time 1st round is worked = 72-81-90 dtr-group.

To get an oval shape on jacket work back and forth only over the bottom 47-54-61 dtr-groups, do not work over the middle 25-27-29 dtr-groups at the top of neck.

Beg from RS and repeat 1st-3rd row in A.3 as before 2 times in total (i.e. back is 6 rows longer vertically), to get a nice transition on every turn work as shown in A.4 and A.5, AT THE SAME TIME inc 7 ch-spaces every time 1st row is worked (= 86-95-104 dtr-groups in total on round incl dtr-groups towards the neck).
Finish with 1 round ch-spaces around the entire jacket (from RS) as follows: * 4 ch, 1 dc around ch-space in the middle of a dtr-group, 4 ch, 1 dc before next dtr-group *, repeat from *-* the entire round, fasten off.

SLEEVE:
Work 60-66-72 tr around armhole (approx. 5 tr in every dtr-group and approx. 30-33-36 tr around ch-space – beg mid under sleeve).

Work next round as follows:
* 1 tr in first/next tr, 1 ch, skip 1 tr *, repeat from *-* the entire round = 30-33-36 tr + 30-33-36 ch.
Continue to work as follows:
ROUND 1: * 6 ch, skip 5 sts, 1 dc in next st *, repeat from *-* the entire round = 10-11-12 ch-spaces.
ROUND 2: Work 2 tr + 2 ch + 2 tr around every ch-space the entire round = 10-11-12 tr-groups.
ROUND 3: Work 2 dtr + 2 ch + 2 dtr around every ch-space in tr-group and 1 ch between every dtr-group the entire round = 10-11-12 dtr-group with 1 ch between each.
ROUND 4: * 12 ch, 1 dc around ch-space in the middle of dtr-group *, repeat from *-* the entire round = 10-11-12 ch-spaces but at the same time dec 1 ch-space on round mid under sleeve as follows: 1 dc around ch-space in the middle of next to last dtr-group on round, 6 ch, 1 tr around ch-space in the middle of dtr-group to be skipped, 6 ch, 1 dc around ch-space in the middle of next dtr-group). On new round work tr-group mid under sleeve in tr between the 2 ch-spaces with 6 ch = 9-10-11 tr-groups.
Repeat 2nd-4th round and dec at the same time 1 ch-space every 3rd round so that there is 1 dtr-group/ch-space less on round. When there are 5-6-7 dtr-groups/ch-spaces on round, work without dec until piece measures 54-54-56 cm, or desired measurements, try the jacket while working. Fasten off and repeat on the other sleeve.

Diagram

= 4 ch, 1 sl st in first ch (see point on circle), round beg and ends here
= ch
= sl st
= work sl sts until the middle of first ch-space, 1 ch
= dc around ch-space
= tr around ch-space
= tr in st
= dtr in st
= triple tr in st
= 6 ch
= 12 ch
= 9 ch
= 2 dtr + 2 ch + 2 dtr around ch-space in tr-group
= 4 ch, 1 dtr + 2 ch + 2 dtr around ch-space in tr-group
= round shows last round on previous diagram, round has already been worked




Comments (168)

Leave your comment!

Soise 16.04.2018 - 11:13:

Bonjour, j\'aimerais savoir si lorsqu\'on rencontre le symbole (dessin) = 9 ml cela signifie que l\'on doit faire 9m en l\'air puis rattacher avec le ms ou 2 fois 9 m en l\'air de fait qu\'il y a un aller vers le haut et un retour vers le bas

DROPS Design 16.04.2018 kl. 13:22:

Bonjour Soise, pour le 12ème symbole, crochetez simplement 9 mailles en l'air, au tour 6, vous crochèterez: 1 ms (= 5ème symbole), 9 ml (= 12ème symbole) tout le tour. Bon crochet!

Marco 15.04.2018 - 12:05:

Salve. I lavori presentati sono bellissimi. Tutti. Ricrearli risulta molto difficile, per via delle cattive spiegazioni e schemi approssimativi. Un vero rompicapo. Almeno per me. Il tutto è confermato dalla mole di commenti e riechieste di spiegazioni. Penso sia il caso di migliorare il tutto. Grazie.

Kevin 03.04.2018 - 05:19: https://drive.google ...

I think I\'ve made a mistake. I did the \"Repeat 1st-3rd round 3-3-4 more times\" step. The next instruction said to get an oval shape to work back and forth only over the bottom 47-54-61 tr-groups. Was I supposed to stop working in the round at that point? My garment is a bit more of a semicircle at this point.

DROPS Design 03.04.2018 kl. 10:22:

Dear Kevin, when starting to work over the 47-54-61 tr-groups for the oval shape you work now back and forth and not in the round anymore. Happy crocheting!

Kay Wilkes 02.04.2018 - 22:17:

Hi. I have just started the sleeves, and I am really confused. I have come to the part where I need to decrease and have SC to attach the last chain 6, but I now need to do the second round 2, so how do I get to the top of the loop of 12 to do the the DC groups. Hope that makes sense

DROPS Design 03.04.2018 kl. 09:57:

Dear Mrs Wilkes, at the end of round 4 (round with 12-ch-spaces), finish the round with a sl st in the first ch from beg of round then sl st to the middle of first ch-space. Happy crocheting!

Karen Manso 26.03.2018 - 15:55:

I am LEFT HANDED! Round 6 at the very beginning of the instructions it says 1 ch, 1 dc around 1st ch-space. I am heading in the opposite direction if I am continuing the round and there is no 1st ch-space. Should I turn my work at this point? Please help!!!!

DROPS Design 28.03.2018 kl. 14:34:

Dear Mrs Manso, circle is worked in the round until working bottom edge. You will then work always from RS. Adjust the diagram to your technique, for any individual assistance you are welcome to contact the store where you bought your yarn. Happy crocheting!

Margo 11.03.2018 - 12:55:

Problem with the chart, I don't know how to read charts. Would it be possible to get the complete written version of this pattern. I really find it beautiful and would need to make it in a hurry for an event. Thank you so much for your help.

DROPS Design 11.03.2018 kl. 16:34:

Dear Margo, I'm sorry but this pattern does not include the written explanations of all the charts.

Miriam 11.03.2018 - 06:59:

Wie genau funktioniert folgender Shritt: "60-66-72 Stb aus dem Armausschnitt auffassen (ca. 5 Stb in jede D-Stb-Gruppe und ca. 30-33-36 Stb um den Lm-Bogen – an der unteren Ärmelmitte beginnen)."? Ich verstehe das nciht ganz.

DROPS Design 12.03.2018 kl. 09:20:

Liebe Miriam, Sie werden jetzt um dem Armausschnitt häkeln, beg an der untereren Ärmelmitte und total 60-66-72 Stb häkeln, dh ca 5 Stb in jede D-Stb-Gruppe (die übersprungenen Maschen) und ca 30-33-36 Stb um den Lm-Bogen (über die übersprungenen Maschen). Viel Spaß beim häkeln!

Miriam Sticher 11.03.2018 - 06:57:

How do I do this:"Work 60-66-72 dc around armhole (approx. 5 dc in every tr-group and approx. 30-33-36 dc around ch-space – beg mid under sleeve)." step? I don't understand it

DROPS Design 12.03.2018 kl. 09:16:

Dear Mrs Sticher, beginning mid under arm, crochet 60-66-72 dc around armhole, ie you will crochet approx. 5 dc in every tr group (along the sts skipped on armhole) and crochet approx. 30-33-36 dc around the chain stitches worked over the skipped sts. Happy crocheting!

Terri 10.03.2018 - 17:07:

I'm starting the sleeve, and I have done the 60/66/72 dc around, it's the next step I'm having trouble with. Can you help me out? Thanks!

DROPS Design 12.03.2018 kl. 08:53:

Dear Terri, when you have worked the 60-66-72 dc around the armhole, finish with a sl st in the first dc at the beg of round then work next round as follows: 1 dc in first st, *ch1, skip 1 dc, 1 dc in next st*, repeat from *-* and finish with ch 1, sl st in the first dc at the beg of round. Happy crocheting!

Jan Lewin-cadogan 07.03.2018 - 16:27:

Do you have this in English

DROPS Design 07.03.2018 kl. 17:08:

Dear Mrs Lewin-Cadogan, just edit language clicking on the arrow under picture to the appropriate one, either UK-English or US-English depending on the crochet terminology you are used to follow. Happy crocheting!

Post a comment to pattern DROPS 171-21

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.