Like it? Share it!

You might also like...

related pattern
  1. Free patterns
  2. Men
  3. Vests
  4. DROPS
  5. 224
  6. 16

Winter Rapids Slipover by DROPS Design

Knitted vest / slipover for men in DROPS Air. The piece is worked with textured pattern and ribbed edges. Sizes S - XXXL.

Keywords: moss st, round neck, sleeveless, slipover, vest

Like it? Share it!

DROPS 224-16
DROPS Design: Pattern no ai-375
Yarn group C or A + A
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL - XXXL

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
250-300-300-350-400-400 g colour 30, sage green

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 5 MM: Length 40 cm and 80 cm.
DROPS CIRCULAR NEEDLE SIZE 4 MM: Length 40 cm and 80 cm.
DROPS DOUBLE POINTED NEEDLES SIZE 5 MM.
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM.

KNITTING TENSION:
17 stitches in width and 22 rows in height with stocking stitch = 10 x 10 cm.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

-------------------------------------------------------

Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------


65% Alpaca, 28% Polyamide, 7% Wool 		from 4.80 £ /50g
DROPS Air mix DROPS Air mix 4.80 £ /50g
Wool Warehouse Direct Ltd 		Order
DROPS Air uni colour DROPS Air uni colour 4.80 £ /50g
Wool Warehouse Direct Ltd 		Order
needles DROPS Needles & Hooks Order
You can get the yarn to make this pattern from 24.00£. Read more.

You might also like...

related pattern

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.

PATTERN:
See diagram A.1. The diagram shows all rows from the right side.

DECREASE TIP-1 (evenly spaced):
To work out how to decrease evenly, count the total number of stitches on needle (e.g. 90 stitches), minus the edge stitches (e.g. 2 stitches) and divide the remaining stitches by number of decreases to be made (e.g. 12) = 7.3. 
In this example decrease by knitting together approx. each 6th and 7th stitch.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

VEST – SHORT OVERVIEW OF THE PIECE:
The front and back pieces are knitted separately, back and forth and bottom up then sewn together. Ribbed edges are worked around the neck and armholes to finish.

FRONT PIECE:
Cast on 90-98-102-110-122-134 stitches with circular needle 4 mm and DROPS Air. Work rib back and forth as follows: 1 edge stitch in GARTER STITCH – read description above, * knit 2, purl 2 *, work from *-* until there is 1 stitch left and 1 edge stitch in garter stitch. Continue this rib for 6 cm.
Change to circular needle size 5 mm and work as follows from the right side: 1 edge stitch in garter stitch, work stocking stitch and decrease 12 stitches evenly over the next 88-96-100-108-120-132 stitches - read DECREASE TIP, and 1 edge stitch in garter stitch = 78-86-90-98-110-122 stitches. Purl 1 row from the wrong side (edge stitches knitted).
Work pattern A.1 with 1 edge stitch in garter stitch on each side. When the piece measures 10 cm from the cast-on edge, increase 1 stitch inside the edge stitches on both sides – 1 yarn over which is worked twisted into the pattern on the next row. Repeat this increase every 10-14-7-8-15-15 cm a total of 3-2-4-4-2-2 times on each side. There are 84-90-98-106-114-126 stitches. Continue the pattern until the piece measures 37-38-39-40-41-42 cm. REMEMBER THE KNITTING TENSION!
Continue A.1 and cast off for the armholes at the beginning of every row as follows: 3 stitches 1 time, 2 stitches 1-1-2-2-3-4 times and 1 stitch 3-3-4-6-6-9 times on each side = 68-74-76-80-84-86 stitches. Continue with A.1 and 1 edge stitch in garter stitch on each side until the piece measures 51-53-54-55-56-57 cm and the next row is from the right side.
Now work the neck as follows: Work the first 28-30-31-32-34-34 stitches as before, cast off 12-14-14-16-16-18 stitches for the neck and work the last 28-30-31-32-34-34 stitches. Place the first 28-30-31-32-34-34 stitches on a thread for the shoulder.

RIGHT SHOULDER (front piece):
= 28-30-31-32-34-34 stitches. Continue the pattern and cast off at the beginning of each row from the right side as follows: 3 stitches 1 time, 2 stitches 1 time and 1 stitch 2-2-3-3-3-3 times = 21-23-23-24-26-26 stitches. Cast off with knit from the right side when the piece measures 60-62-64-66-68-70 cm from the cast-on edge.

LEFT SHOULDER (front piece):
Place the 28-30-31-32-34-34 stitches from the thread back on circular needle size 5 mm. Continue the pattern and cast off at the beginning of each row from the wrong side as follows: 3 stitches 1 time, 2 stitches 1 time and 1 stitch 2-2-3-3-3-3 times = 21-23-23-24-26-26 stitches. Cast off with knit from the right side when the piece measures 60-62-64-66-68-70 cm from the cast-on edge.

BACK PIECE:
Cast on 90-98-102-110-122-134 stitches with circular needle 4 mm and DROPS Air. Work rib back and forth as follows: 1 edge stitch in garter stitch, * knit 2, purl 2 *, work from *-* until there is 1 stitch left and 1 edge stitch in garter stitch. Continue this rib for 6 cm.
Change to circular needle size 5 mm and work as follows from the right side: 1 edge stitch in garter stitch, work stocking stitch and decrease 12 stitches evenly over the next 88-96-100-108-120-132 stitches - remember DECREASE TIP and 1 edge stitch in garter stitch = 78-86-90-98-110-122 stitches. Purl 1 row from the wrong side (edge stitches knitted).
Continue with A.1 and 1 edge stitch in garter stitch on each side. When the piece measures 10 cm from the cast-on edge, increase 1 stitch inside the edge stitches on both sides – 1 yarn over which is worked twisted into the pattern on the next row. Repeat this increase every 10-14-7-8-15-15 cm a total of 3-2-4-4-2-2 times on each side. There are 84-90-98-106-114-126 stitches. Continue working until the piece measures 37-38-39-40-41-42 cm.
Continue A.1 and cast off for the armholes at the beginning of every row as follows: 3 stitches 1 time, 2 stitches 1-1-2-2-3-4 times and 1 stitch 3-3-4-6-6-9 times on each side = 68-74-76-80-84-86 stitches. Continue with A.1 and 1 edge stitch in garter stitch on each side until the piece measures 58-60-62-64-66-68 cm and the next row is from the right side.
Now work the neck as follows: Work the first 22-24-24-25-27-27 stitches as before, cast off 24-26-28-30-30-32 stitches for the neck and work the last 22-24-24-25-27-27 stitches. Each shoulder is finished separately.

RIGHT SHOULDER (back piece):
= 22-24-24-25-27-27 stitches. Continue the pattern and cast off 1 stitch on the next row from the neck = 21-23-23-24-26-26 stitches. Cast off with knit from the right side when the piece measures 60-62-64-66-68-70 cm from the cast-on edge.

LEFT SHOULDER (back piece):
= 22-24-24-25-27-27 stitches. Continue the pattern and cast off 1 stitch on the next row from the neck = 21-23-23-24-26-26 stitches. Cast off with knit from the right side when the piece measures 60-62-64-66-68-70 cm from the cast-on edge.

ASSEMBLY:
Sew the shoulder seams edge to edge so the seam is flat. Sew the side seams inside the 1 edge stitch, working from the bottom edge up to the armholes.

NECK:
Use circular needle size 4 mm and DROPS Air. Start from the right side by the shoulder seam and knit up approx. 76-80-88-92-96-100 stitches around the neck (the number of stitches should be divisible by 4). Work rib in the round (knit 2, purl 2) for 3 to 3½ cm. Cast off with knit over knit and purl over purl.

SLEEVE-EDGES:
Use circular needle size 4 mm and DROPS Air. Start from the right side by the side seam and knit up approx. 96-100-104-108-116-120 stitches around the armhole, inside the 1 edge stitch (the number of stitches should be divisible by 4). Work rib in the round (knit 2, purl 2) for 3 to 3½ cm. Cast off with knit over knit and purl over purl. Repeat around the other armhole.

Diagram

symbols = purl from right side, knit from wrong side
symbols = knit from right side, purl from wrong side
diagram

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 224-16) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

signature-image signature

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

Each of our patterns has specific tutorial videos to help you.

These step-by-step tutorials might also help you:

We have also step-by-step guides for different techniques which you'll find here.

And a very handy technical dictionary!
1) Why is the knitting/crochet tension so important?
2) What are the yarn groups?
3) Can I use a different yarn than what the pattern suggests?
4) How do I use the yarn converter?
5) Why do I get the wrong knitting tension with the suggested needle size?
6) Why is the pattern worked top-down?
7) Why are the sleeves shorter in larger sizes?
8) What is a repeat?
9) How do I work according to a knitting diagram?
10) How do I work according to a crochet diagram?
11) How do I work several diagrams simultaneously on the same row/round?
12) Why does the piece start with more chain stitches than it’s worked with?
13) Why increase before the rib edge when the piece is worked top-down?
14) Why increase in the cast-off edge?
15) How do I increase/decrease on every 3rd and 4th row/round alternately?
16) Why is the pattern slightly different than what I see in the photo?
17) How can I work a jacket in the round instead of back and forth?
18) Can I work a jumper back and forth instead of in the round?
19) Why do you show discontinued yarns in the patterns?
20) How do I make a women’s size garment into a men’s size one?
21) How do I prevent a hairy garment from shedding?
22) Where on the garment is the length measured?
23) How do I know how many balls of yarn I need?

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (5)

country flag Volders Rosette wrote:

Ik had al een mailtje gestuurd en andwoord terug gekregen, maar vind ik niet meer. Had graag geweten de hoeveelheid wol voor een mannen Slipover dat ik graag zou bestellen. Maat l. Kleur van de wol Parelgrijs. Drops Air. Garengroep C. Patroon nr 224-16 . Dank bij voorbaat. Grtjs

06.03.2023 - 22:04

DROPS Design answered:

Dag Rosette,

Bij het patroon staat aangegeven hoeveel wol je in elke maat nodig hebt. 1 bol weegt 50 gram, dus voor maat L heb je 6 bollen nodig (= 300 gram).

08.03.2023 kl. 12:41

country flag Marie Christine wrote:

Twee vragen: waarom wordt deze slip-over op rondbrei naalden gebreid ? En waarom wordt er aangegeven dat ik naalden zonder knop nodig?

15.02.2023 - 20:57

country flag Elena wrote:

I appreciate your prompt response each time. I really love the model but is just not working for me as my first time. I did 2 purl than 2 knit (RS) 2 purl and 2 knit (WS) 4 knit on RS 4 purl on WS 2 knit than 2 purls RS etc and it just does not look right. Maybe I just need to start my first project with another model.

04.06.2022 - 20:43

country flag Elena wrote:

So "= purl from right side, knit from wrong side " means 2 rows?

01.06.2022 - 11:50

DROPS Design answered:

Dear Elena, no, this means if you work this stitch from RS you will purl it, and the same stitch/symbol will be knitted from WS ; in other words, a white square is a stitch in stocking stitch, a black dot a stitch worked in reversed stocking stitch. Happy knitting!

01.06.2022 kl. 13:15

country flag Elena wrote:

Can I have another description on how to follow the diagram? I do not understand how to do the "= purl from right side, knit from wrong side = knit from right side, purl from wrong side"

31.05.2022 - 18:51

DROPS Design answered:

Hi Elena, When working from the right side the open squares are knitted, when working back from the wrong side they are purled. When working from the right side the squares with black circles are purled and then knitted when you work back from the wrong side. Happy knitting!

01.06.2022 kl. 06:53

Post a comment to pattern DROPS 224-16

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

© 1982-2023 DROPS Design A/S We reserve all rights. This document, including all its sub-sections, has copyrights.
What can you do with our patterns? You can share DROPS patterns online, using the pattern original picture, materials, name and number. But you are NOT ALLOWED to reproduce the complete pattern digitally in any way. Yarn stores are welcome to use the DROPS pattern database to promote the sale of our assortment. You can print out our patterns, make as many copies as you’d like. The only thing we ask is that you don't make any changes / additions to the original printed document. And that the patterns according to the DROPS philosophy are given out to the consumers for free. Editorials that wish to publish our patterns in printed books or magazines can contact us for more information. The sale of garments based on DROPS patterns is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of clothing labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”. The use of DROPS photos for marketing purposes/sales is only permitted in connection with the use/sale of DROPS products. The photos may not be cut or edited and the logo should be clearly visible.
We reserve the right to withdraw the permission for use of our patterns at any time, notwithstanding the reason.