Christi escribió:
This is a confusing pattern. Would love it if you could simplify it. Such a cute hat but can’t follow the instructions. Thanks
17.01.2023 - 19:56
Jessica-Jean escribió:
As a result of a discussion on the Knitting Paradise forum, I am making this hat. After a few false starts, mine is coming along well. I’m very happy with this design. Progress photos on Ravelry. Thank you for your patience.
27.12.2022 - 13:48
Judy Hoffman escribió:
What I don’t understand is after how many stitches ; every 2nd ior 3rd do you decrease to evenly get to 98 from 132?
02.12.2022 - 14:30
Judy Hoffman escribió:
What I can’t figure out is with 132 stitches after how many stitches do you do you decrease to evenly get to 98 stiches remaing? Every 2? 3? Or
02.12.2022 - 14:28DROPS Design respondió:
Dear Mrs Hoffman, divide 132 (total number of stitches on needle) by 34 (number of sts to decrease) = 3.88 - This mean you will alternately work together every 3rd and 4th and every 4th and 5th st, making sure you will work K2 tog a total of 34 times on the round - see ex. 2 in this lesson. Happy knitting!
06.12.2022 - 08:02
Judy Rein escribió:
First decrease is 34 decreases on 132 stitches. Yet your tip says measure by 98 stitches. Do you mean decrease every 2-3 inches based on the number if stitches you want AFTER the decreases?
02.12.2022 - 01:12DROPS Design respondió:
Hi Judy, You start with 132 stitches and decrease 34 stitches evenly around the hat. 132 - 34 = 98 stitches remaining. Happy knitting!
02.12.2022 - 08:15
Cathleen Sparks escribió:
I am working on the dublin town hat, 225-29. I am struggling with a part of the directions when you begin decreasing with a slip stitch. I understand 1 decease after each marker snd every other round but it says for a total of 10-11 times. Does that mean I have 10 to 11 rounds decreasing using the every other round which would make it 20-22 rounds. Then the next round 2-2 times is vague also. Please help.
29.11.2022 - 01:39DROPS Design respondió:
Dear Mrs Sparks, you will decrease like this: *work 1 round decreasing 7 sts, work 1 round without decrease*, and work these 2 rounds a total of 10 times (first size) or 11 times (larger size); then decrease on next 2 rounds (2 times on every round). Happy knitting!
29.11.2022 - 10:15
Cathleen Sparks escribió:
I am currently work on the Dublin Town hat. It is worked from bottom up. The edge is not consistent with the picture of a rolled knitted edge which really makes the hat. I have invested in the Alaska Drops yarn to be sure I could have a good results. I fear this pattern is missing some directions for a knitted edge to create the roll.
26.11.2022 - 03:20DROPS Design respondió:
Dear Cathleen, the rib stitch will not roll initially, but it should start rolling once you start working the stocking stitch in the upper part of the hat. If it still doesn't roll, then the rib stitch isn't too tight and you need to start again with a tighter gauge. Happy knitting!
27.11.2022 - 15:47
CodeiherbLEasp escribió:
Vk iherb promo code
06.10.2022 - 18:00
Noeleen Baxter escribió:
Hi Good Morning, I have just purchased Drops Alaska and it says to use needle size 5mm but the Dublin Hat pattern says 3.25 mm. That's a big difference in needle size. Can you explain please. Thank you. Kind regards Noeleen
27.02.2022 - 09:52DROPS Design respondió:
Dear Noeleen, the most important thing is not the needle size, but rather the gauge. The texture of this hat is quite tight, to keep its shape. So it needs to be worked more tightly, with a higher than usual gauge. That is why it's different from the one stated in general for the yarn. In any case, when in doubt, you should follow the gauge indicated in the pattern always. The size indicated is 3.5 mm, but you may need a bigger or smaller needle, depending on your own gauge. Happy knitting!
27.02.2022 - 16:44
Louise Dainty escribió:
Good morning, I love the look of this hat. On the picture it shows knit rows then rib, but on the pattern it doesn’t mention any knit rows at the beginning. Can you please advise, thank you
20.01.2022 - 09:35DROPS Design respondió:
Dear Mrs Dainty, you start the hat with a ribbing edge, but at the end, you will fold up the rib to the right size, ie on the picture ribbing edge is folded over. Happy knitting!
20.01.2022 - 09:45
Dublin Town#dublintownhat |
|
![]() |
![]() |
Gorro de punto en DROPS Alaska. La pieza está tejida de abajo hacia arriba.
DROPS 225-29 |
|
EXPLICACIONES PARA REALIZAR EL PATRÓN: ------------------------------------------------ TIP-1 PARA DISMINUIR (distribuidos equitativamente): Para calcular cómo disminuir equitativamente, contar el número total de puntos en la aguja (p. ej. 132 puntos) y dividirlo entre el número de disminuciones a hacer (p. ej. 34) = 3.8. En este ejemplo, disminuir tejiendo juntos de derecho aprox. cada 3er y 4º punto. TIP-2 PARA DISMINUIR: Disminuir de la manera siguiente después de cada marcador: Deslizar 1 punto como de derecho, tejer 1 derecho y pasar el punto deslizado por encima del punto tejido (= 1 punto disminuido). ------------------------------------------------ COMENZAR LA PIEZA AQUÍ: ------------------------------------------------ GORRO – RESUMEN DE LA PIEZA: La pieza se teje en redondo con aguja circular, de abajo hacia arriba. Cambiar a agujas de doble punta cuando sea necesario. GORRO: Montar 132-140 puntos con aguja circular tamaño 3.5 mm y DROPS Alaska. Tejer en resorte en redondo (2 derechos, 2 reveses) durante 2 cm. Continuar con punto jersey hasta que la pieza mida 7 cm. ¡RECORDAR MANTENER LA MISMA TENSIÓN DE TEJIDO DE LA MUESTRA! En la vuelta siguiente, disminuir 34-35 puntos distribuidos equitativamente – leer TIP-1 PARA DISMINUIR = 98-105 puntos. Continuar con punto jersey. Cuando la pieza mida 19-18 cm, insertar 7 marcadores con 14-15 puntos entre cada uno. En la vuelta siguiente, disminuir 1 punto después de cada marcador – leer TIP-2 PARA DISMINUIR (= 7 puntos disminuidos). Disminuir así cada 2ª vuelta un total de 10-11 veces, después en cada vuelta 2-2 veces = 14 puntos restantes. En la vuelta siguiente, tejer todos los puntos juntos de derecho de 2 en 2 = 7 puntos. Cortar el hilo, pasarlo a través de los puntos restantes, fruncir y rematar bien. El gorro mide aprox. 26 cm de la parte de arriba hacia abajo en ambas tallas. Doblar el resorte hacia el lado derecho de la labor. |
|
¿Terminaste este patrón?Entonces, etiqueta tus fotos con #dropspattern #dublintownhat o envíalas a la galería #dropsfan. ¿Necesitas ayuda con este patrón?Encontrarás 15 videos tutoriales, un espacio para comentarios/preguntas y más visitando la página del patrón en garnstudio.com © 1982-2025 DROPS Design A/S. Todos los derechos reservados. Este documento, incluyendo todas sus sub-secciones, está protegido por los derechos de autor (copyright). Lee más acerca de lo que puedes hacer con nuestros patrones en la parte de abajo de cada patrón de nuestro sitio. |
Escribe un comentario sobre DROPS 225-29
¡Nos encantaría saber qué piensas acerca de este patrón!
Si quieres escribir una pregunta referente al patrón, por favor asegúrate de elegir la categoría correcta en el formulario debajo, para acelerar el proceso de respuesta. Los campos obligatorios están marcados con un *.