DROPS Alpaca Party - 13 alpaca yarns on sale all October!

Short rows in garter st - with wrap

When working short rows you can shape the garment by making soft curves or give a better fit by creating bust darts.
Short rows are partially worked rows before turning. By turning with a wrap you avoid a hole at the turning point.
Short row in garter st: Work number of sts told in pattern, slip following st purl-wise, place yarn in front of work, slip st back on left needle, turn and work the row back. When knitting next row and getting to the st with wrap; knit wrap and stitch together as one stitch and then finish row.

To see a pattern with this technique, see: DROPS 133-3 or the picture to the left.

Patterns using this technique

DROPS 177-8

DROPS 177-8
Change language:

Video #440, listed in: Learn to knit, Knitting tips & tricks, Short Rows

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag BEATRICE wrote:

Supper, car invisible

28.11.2013 - 14:12

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work German Short Rows – with a double stitch round on the needle
8:41
How to work German Short Rows – with a double stitch round on the needle

German short rows = The work is turned in the middle of a row. When working short rows, there will be a small hole - this can be closed by tightening the thread or using the German short row technique. Row 1 (= right side): Knit until where the piece is to be turned, turn, when it is knitted further there will be a small hole at the turn - this hole can be closed like this: Row 2 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch (with a stitch and a thread). Purl until where the work is to be turned. Turn the work. Row 3 (= right side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before knitting the next stitch = the first stitch on the right needle has now become a double stitch. Knit until the double stitch from the previous row and knit the double stitch so that the thread that was placed over the needle and the stitch is knitted together = 1 stitch. Knit until where the work is to be turned. Turn the work. Row 4 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch. Purl until the double stitch from the previous row and purl the double stitch so that the thread that was placed over the needle and the stitch is purled together = 1 stitch. Purl until where the work is to be turned. Turn the work. Repeat 3rd and 4th row. We use the yarn DROPS Snow in the video. This technique can be used in many patterns; you’ll find pattern by clicking on the pictures under:
Video thumbnail for How to work German Short Rows – with a double stitch back and forth on the needle
5:17
How to work German Short Rows – with a double stitch back and forth on the needle

German short rows = The work is turned in the middle of a row. When working short rows, there will be a small hole - this can be closed by tightening the thread or using the German short row technique. Row 1 (= right side): Knit until where the piece is to be turned, turn, when it is knitted further there will be a small hole at the turn - this hole can be closed like this: Row 2 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch (with a stitch and a thread). Purl until where the work is to be turned. Turn the work. Row 3 (= right side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before knitting the next stitch = the first stitch on the right needle has now become a double stitch. Knit until the double stitch from the previous row and knit the double stitch so that the thread that was placed over the needle and the stitch is knitted together = 1 stitch. Knit until where the work is to be turned. Turn the work. Row 4 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch. Purl until the double stitch from the previous row and purl the double stitch so that the thread that was placed over the needle and the stitch is purled together = 1 stitch. Purl until where the work is to be turned. Turn the work. Repeat 3rd and 4th row. We use the yarn DROPS Snow in the video. This technique is used in several patterns - you can find patterns by clicking on the pictures below:
Video thumbnail for How to work a sleeve to a garment with European shoulder with short rows
13:07
How to work a sleeve to a garment with European shoulder with short rows

In this DROPS video we show how to knit up stitches to one sleeve, working short rows, decrease under the sleeve, increase stitches before the rib, switch to smaller needle and a little bit of the bind off (knit over knit, and purl over purl). Insert 1 marker on the top of armhole (NB: This is not where the stitches were knitted up for the front piece, but a few cm down on the front piece, this is the middle of the shoulder). Start in the middle of the new stitches cast on under sleeve and pick up the number of stitches it says in the pattern around the armhole – adjust so that there are the same number of stitches along armhole on each side of the marker. Now work stockinette stitch back and forth with short rows over sleeve cap, to give the sleeve a better fit. Then work in the round with decreases under the sleeve. Follow the description in the pattern on how to work short rows, how and how many decreases, how long the sleeve should be and the rib. In this video we work with 2 yarn qualities: DROPS Lima color no. 9029 sage green and DROPS Kid-Silk color no. 45 soft mint, needle size 5 MM = US 8. You must read a pattern to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to work a neck with short rows
15:03
How to work a neck with short rows

In this DROPS video we show how to work after chart A.1 and A.2 to the neck with short rows to the “Spring Fuzz” Jacket in DROPS 213-27. First we work right neck after chart A.1 and Short Rows-1, then left neck after chart A.2 and Short Rows-2. Then we show how to work these pieces together. This jacket is worked in DROPS Melody, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work an elevation mid back
11:13
How to work an elevation mid back

In this DROPS video we show how to work an elevation with short rows. This technique is frequently used in our patterns for pants or in back of neck on jumpers and jackets. In this video we work from beginning of round (= marker / mid back) as follows: K10 sts, turn piece (to avoid holes, we slip first st on return and tighten the thread). K20 st, turn piece, K30 st, turn piece and K40, turn piece. Finally we work one round in stocking st over all sts. We now have an elevation (= more rows) mid back of the piece. REMEMBER - you will need to read the specific pattern to be able to follow. To see a pattern using this technique, go to: BabyDROPS 21-36 (pants) or DROPS 165-14 (jumper)

Video thumbnail for Japanese short rows
9:57
Japanese short rows

In this DROPS video we show how to work Japanese short rows. We have already knitted a piece in stockinette, and continues like this in the video: Work stockinette until 5 st remains, turn, put a mark (or a safety pin) on the working yarn close up to the work (the mark will hang on wrong side of work), slip the st with the mark purl-wise, purl until 5 st remains, turn, put a mark on the working yarn close up to the work (the mark will hang on wrong side of work), slip the st with the mark purl-wise, knit until 10 st remains, turn, put a mark on the working yarn close up to the work (the mark will hang on wrong side of work), slip the st with the mark purl-wise, purl until 10 st remains, turn, put a mark on the working yarn close up to the work (the mark will hang on wrong side of work), slip the st with the mark purl-wise. Know you knit, even the st with the mark, lift the loop with the mark on left needle, remove the mark, knit this loop and the next st straight together as one st. Do the same with the next mark on the right side row and finish the row. Turn, purl, even the st with the mark, slip the next st purl-wise from left to right needle, lift the loop with the mark on left needle, remove the mark, slip st from right needle back on left needle, purl st and loop together as one st, do the same with the next mark. Purl out row.