DROPS / 182 / 18

Laila by DROPS Design

The set consists of: Knitted hat and poncho with cables and rib. Sizes S – XXXL. The set is worked in DROPS Nepal.

DROPS Design: Pattern no ne-261
Yarn group C or A + A
----------------------------------------------------------
For the complete set there will be enough with approx. 400-450-500 g DROPS Nepal.
----------------------------------------------------------

HAT:
Sizes: S/M – M/L
Fits head size: 54/56 - 56/58
Materials:
DROPS NEPAL from Garnstudio (belongs to yarn group C)
100 g for both sizes in colour 8783, forget-me-not.

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn Group C)" – see the link below.

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 cm) SIZE 4.5 MM – or the size needed to get 18 stitches and 23 rows stocking stitch on 10 cm in width and 10 cm in height.
----------------------------------------------------------

PONCHO:
Sizes: S/M – L/XL – XXL/XXXL
Circumference at top: 73-92-101 cm
Circumference at bottom: 162-176-191 cm
Height: 42-44-46 cm
Materials:
DROPS NEPAL from Garnstudio (belongs to yarn group C)
350-350-400 g colour 8783, forget-me-not.

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn Group C)" – see the link below.

DROPS CIRCULAR NEEDLE (60 and 80 cm) SIZE 4.5 MM – or the size needed to get 18 stitches and 23 rows stocking stitch on 10 cm in width and 10 cm in height.

DROPS CIRCULAR NEEDLE (60 and 80 cm) SIZE 5 MM – or the size needed to get 17 stitches and 22 rows stocking stitch on 10 cm in width and 10 cm in height.
--------------------------------------------------------

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

65% Wool, 35% Alpaca
from 1.55 £ /50g
DROPS Nepal uni colour DROPS Nepal uni colour 1.55 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Nepal mix DROPS Nepal mix 1.60 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 13.95£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
INFORMATION FOR THE PATTERN:

PATTERN:
Hat: See diagrams A.1, A.2 and A.3
Poncho: See diagrams A.1, A.2, A.4 and A.5
The diagrams show all the rows in the pattern seen from the right side.
INCREASE TIP (for poncho):
Increase 1 stitch by making 1 yarn over. On the next round work the yarn over twisted to prevent holes.

DECREASE TIP (for poncho):
Decrease as follows at the end of the section with stocking stitch:
Work until there are 2 stitches left, knit 2 stitches together.
Decrease as follows at the beginning of the section with stocking stitch:
Slip 1 stitch as if to knit, knit 1 stitch, pass the slipped stitch over.
----------------------------------------------------------

HAT:
The piece is worked in the round with circular needle, bottom up.
Cast on 88-92 stitches with circular needle size 4.5 mm and Nepal. Knit 1 round, then work as follows: * Purl 1-2, work PATTERN according to diagram A.1 (= 21 stitches) *, work from *-* a total of 4 times. When A.1 has been completed 1 time in height, work as follows: * Purl 1-2, A.2 (= 21 stitches) *, work from *-* a total of 4 times. REMEMBER THE KNITTING TENSION! When A.2 has been completed 3 times in height work as follows: * Purl 1-2, A.3 (= 21 stitches) *, work from *-* 4 times. When A.3 has been completed 1 time in height, there are 32-36 stitches on the round. Work all stitches together, 2 and 2 = 16-18 stitches. Cut the strand and pull it through the remaining stitches, tighten and fasten well.

----------------------------------------------------------

PONCHO:
The piece is worked in the round with circular needle, bottom up.
Cast on 296-320-344 stitches with circular needle size 4.5 mm and Nepal. Knit 1 round, then work as follows: * Purl 1, A.1 (= 21 stitches), purl 1, rib (knit 3 /purl 3) over the next 48-54-60 stitches, knit 3 *, work from *-* 3 more times. Work A.1 1 time in height, then change to circular needle size 5 mm and continue working as follows: * Purl 1, A.2 (= 21 stitches), purl 1, stocking stitch over the next 51-57-63 stitches AT THE SAME TIME as you decrease 5 stitches evenly over these stitches (= 46-52-58 stitches stocking stitch) *, work from *-* 3 more times = 276-300-324 stitches. Repeat A.2 upwards. REMEMBER THE KNITTING TENSION! AT THE SAME TIME when the piece measures 6 cm decrease 1 stitch in each side of each section of stocking stitch (= 8 stitches decreased) – read DECREASE TIP. Decrease every 3 cm a total of 12 times. AT THE SAME TIME when the piece measures approx. 16-18-20 cm (adjust after a complete repeat of A.2) continue by working A.4 over all A.2, continue with purl 1 in each side of A.4 and stocking stitch over the remaining stitches. When A.4 has been completed 1 time in height (the decreases in stocking stitch are now finished) there are 124-148-172 stitches on the round. Change to circular needle size 4.5 mm. Continue as follows: * Purl 1, A.5 (= 7 stitches), purl 1, rib (knit 2 / purl 2) over the next 20-26-32 stitches, AT THE SAME TIME as you increase 0-2-0 stitches – read INCREASE TIP, knit 2 *, work from *-* 3 more times = 124-156-172 stitches. Continue with rib and A.5 until A.5 has been worked 1 time in height, cast off with knit over knit and purl over purl. The piece measures approx. 42-44-46 cm.

Diagram

= knit
= purl
= knit 2 stitches together
= slip 1 stitch as if to knit, knit 1, pass the slipped stitch over
= 1 yarn over between 2 stitches
= no stitch, skip this square



Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 182-18) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (9)

Annika 17.10.2019 - 06:59:

Buongiorno, che significa nessuna maglia saltare questo quadrato? Grazie.

DROPS Design 17.10.2019 kl. 08:19:

Buongiorno Annika. Il quadrato nero non corrisponde a nessuna maglia. Quindi, quando lo raggiunge, lavora la maglia sul ferro di sinistra come indicato nel simbolo che segue il quadrato nero. P.es nella seconda riga del diagramma A.3, lavora 9 maglie diritto, 1 maglia rovescio, 9 m diritto. Buon lavoro!

Célyne Ross 28.08.2019 - 21:59:

Que voulez-vous dire par : « pas de maille, sautez cette cas »? Que faut-il faire?

DROPS Design 29.08.2019 kl. 09:21:

Bonjour Mme Ross, dans A.3, vous diminuez 2 m au 1er rang, au 2ème rang, on a donc 2 mailles en moins et on va tricoter ainsi 1 m en moins avant la maille envers et après la maille envers au milieu de A.3 = on a toujours 2 m end après la diminution et avant la diminution. Bon tricot!

Lorraine Métivier 22.03.2019 - 19:51:

Très jolie j'espère le tricoter

Lorraine Métivier 20.03.2019 - 23:45:

Fait longtemps que je cherche ce modele

Lorraine Métivier 20.03.2019 - 23:42:

J'adore votre site et vos modele

Nicole 07.01.2019 - 05:16:

What does it mean when the pattern says "purl 1-2"? Do you choose to purl either 1 or 2 stitches? Thank you.

DROPS Design 07.01.2019 kl. 08:11:

Hi Nicole, The numbers are for the 2 different sizes (S/M; M/L), so the first number is for S/M the second for M/L. Happy knitting!

Hanna 14.03.2018 - 21:35:

Jeg strikket small, og den ble alt for stor. Det hadde vært passe med A.2 tre ganger i bredden og ikke fire. Jeg droppet også A.3 helt, og strikket heller to og to sammen rett etter A.2, før jeg trakk tråden gjennom. Tovet den lett og da ble den passe.

Kristýna 07.01.2018 - 17:47:

Dobrý den, prosím kde najdu schéma A1-A3 k ponču? Děkuji. Kristýna

DROPS Design 07.01.2018 kl. 22:17:

Dobrý den, Kristýno, díky za upozornění - opraveno. Hodně zdaru! Hana

Marita Lang 01.10.2017 - 14:45:

Wie komme ich bei Größe S/M auf die 124 Maschen. Wenn ich 276 Maschen habe und 12x8 Maschen abnehme, sind das 276 minus 96 = 180 Maschen. Wenn ich dann in Muster A 4 noch 4x8 Maschen abnehme, verbleiben 180 Maschen minus 32 = 148 Maschen. Wo werden denn die restlichen 24 Maschen abgenommen?

DROPS Design 02.10.2017 kl. 10:17:

Liebe Frau Lang, wenn Sie dann A.4 stricken werden Sie insgesamt 14 Maschen abnehmen x 4 A.4 = 56 M werden noch dazu abgenommen, es bleiben: 276 - 96 - 56 = 124 M. Viel Spaß beim stricken!

Post a comment to pattern DROPS 182-18

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.