DROPS / 182 / 17

Warm Snap by DROPS Design

The set consists of: Knitted hat, neck warmer and wrist warmers with textured pattern. The set is knitted in DROPS Nepal.

DROPS Design: Pattern no ne-255
Yarn group C or A + A
-----------------------------------------------------------
For the complete set, there will be enough with approx. 250 g DROPS Nepal.
-----------------------------------------------------------
HAT:
Size: One size
Fits head size: 54/56 cm
Materials:
DROPS NEPAL from Garnstudio (belongs to yarn group C)
100 g colour 7139, grey green

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn Group C)" – see the link below.

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 cm) SIZE 5 MM – or the size needed to get 17 stitches and 22 rows stocking stitch on 10 cm in width and 10 cm in height.
-----------------------------------------------------------
NECK WARMER:
Size: One size
Length before assembly: 90 cm. Width before assembly: 21 cm
Materials:
DROPS NEPAL from Garnstudio (belongs to yarn group C)
150 g colour 7139, grey green

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn Group C)" – see the link below.

DROPS NEEDLE SIZE 5 MM – or the size needed to get 17 stitches and 22 rows stocking stitch on 10 cm in width and 10 cm in height.
----------------------------------------------------------
WRIST WARMERS:
Sizes: S/M – L/XL
Circumference: 19-21 cm
Height: 16-17 cm
Materials:
DROPS NEPAL from Garnstudio (belongs to yarn group C)
50 g for both sizes in colour 7139, grey green

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn Group C)" – see the link below.
DROPS NEEDLE SIZE 5 MM – or the size needed to get 17 stitches and 22 rows stocking stitch on 10 cm in width and 10 cm in height.
-----------------------------------------------------------

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (6)

65% Wool, 35% Alpaca
from 1.55 £ /50g
DROPS Nepal uni colour DROPS Nepal uni colour 1.55 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Nepal mix DROPS Nepal mix 1.60 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 7.75£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
INFORMATION FOR THE PATTERN:
RIDGE/GARTER STITCH (worked back and forth):
1 ridge = Knit 2 rows.

PATTERN:
See diagram A.1. The diagram shows all the rows in the pattern seen from the right side.
----------------------------------------------------------
HAT:
The piece is worked in the round with circular needle. Change to double pointed needles when necessary.
Cast on 84 stitches with circular needle size 5 mm and Nepal. Work PATTERN according to diagram A.1 in the round (= 28 repeats of 3 stitches). REMEMBER THE KNITTING TENSION! When the piece measures 20 cm insert 7 marker threads in the piece as follows: The first marker thread is inserted after the first 3 stitches on the round (i.e. after 1 knitted stitch), then insert the next 6 with 12 stitches between each. When the last marker thread has been inserted, there are 9 stitches left on the round. Now start the decreases. Continue A.1 upwards, but on the first round, decrease 1 stitch after each marker thread by purling 2 stitches together (= 7 stitches decreased). Decrease in this way every 2nd round a total of 9 times = 21 stitches left. Work 1 round without decreases. On the next round knit all stitches twisted together, two and two = 11 stitches left. Cut the strand, pull it through the remaining stitches, tighten and fasten well. The hat measures approx. 29 cm from the top down. Turn up an edge of approx. 5-6 cm at the bottom of the hat.
----------------------------------------------------------
NECK WARMER:
The piece is worked back and forth on the needle and is sewn together at the end.
Cast on 35 stitches with needle size 5 mm and Nepal. Work 1 RIDGE – see description above. Work pattern from the right side as follows: 2 edge stitches in garter stitch, knit 1, work PATTERN according to diagram A.1 (= 10 repeats of 3 stitches), 2 edge stitches in garter stitch. REMEMBER THE KNITTING TENSION! When the piece measures 21 cm insert a marker at the beginning of the next row from the right side (= marker for assembly). When the piece measures 89 cm work 1 ridge over all stitches. Cast off.
To avoid getting a tight cast-off edge, you can use a larger needle size or make a yarn over after approx. every 4th stitch, which is then cast off.

ASSEMBLY:
Sew the cast-off edge to the one long-side (between the cast-on edge and the marker inserted after 21 cm). Sew inside the cast-off edge and in the outermost stitch along the edge so that the seam is not thick. Cut and fasten the strand.
----------------------------------------------------------
WRIST WARMERS:
The piece is worked back and forth on the needle and is sewn together at the end.
Cast on 32-35 stitches with needle size 5 mm and Nepal. Work pattern from the right side as follows:
2 edge stitches in GARTER STITCH - see description above, knit 1, work PATTERN according to diagram A.1 (= 9-10 repeats of 3 stitches), 2 edge stitches in garter stitch. Continue the pattern back and forth in this way. REMEMBER THE KNITTING TENSION! When the piece measures 16-17 cm cast off. To avoid getting a tight cast-off edge you can use a larger needle or make a yarn over after approx. every 4th stitch which is then cast off. Cut and fasten the strand.

ASSEMBLY:
Sew together the sides of the wrist warmer as follows:
Sew in the outermost loop of the outermost stitch, in every stitch upwards so that the seam is not thick: Start at the bottom of the wrist warmer and sew the seam 9-10 cm upwards, Cut and fasten the strand. Skip 5 cm (= hole for the thumb) and sew the last 2 cm together.
Work 1 more wrist warmer in the same way.

Diagram

= knit from right side, purl from wrong side
= purl from right side, knit from wrong side

Comments (6)

Leave your comment!

Prisca 27.02.2018 - 21:20:

Bonjour, J’ai du mal à comprendre le diagramme A1. Dois-je le lire de gauche à droite et de haut en bas ?

DROPS Design 27.02.2018 kl. 22:12:

Bonsoir! Comment lire les diagrammes des points fantaisie dans les explications vous trouverez ICI. Bon travail

Francesca 04.02.2018 - 19:00:

Salve, non riesco a capire cosa si intende 2 maglie vivagno a legaccio per lo sclada collo... Due maglie non lavorale? A diritto o a rovescio? Ringrazio anticipatamente per una risposta e complimenti per il sito. :-)

DROPS Design 04.02.2018 kl. 19:19:

Buongiorno Francesca. Deve lavorare le prime due maglie e le ultime due maglie sul ferro sempre a diritto. Buon lavoro!

Nico Dandoi 07.01.2018 - 21:29:

Beste, ik ben al twee keer begonnen met het minderen, maar dit geeft geen mooi resultaat. Ik weet niet hoe ik het patroon verder moet breien in combinatie met de geminderde steken. Kan u mij aub uitleggen hoe de minderingen precies moeten zonder het patroon te negeren?

DROPS Design 08.01.2018 kl. 09:44:

Hoi Nico, Je ontkomt er niet aan dat het patroon verbreekt in de muts als je gaat minderen. (Dit is ook te zien in het model op de foto). Als je mindert volgens de beschrijving, dus naast de markeerdraden en door averecht of recht samen te breien (zie patroon), dan krijg je een mooi verloop in het patroon. Bekijk evt. ook de video's onderaan het patroon.

Barbara 18.12.2017 - 18:18:

Buonasera, non sono molto esperta e sono in difficoltà con le diminuzioni, prima di tutto volevo sapere se le diminuzioni vanno fatte sulla riga DDR o DRR (leggendo da destra verso sinistra) o è indifferente? Seconda domanda, come faccio a continuare a seguire il diagramma A1 se le maglie vengono a mancare? Ci ho provato ma non so bene come fare. Spero in un aiuto. Mille grazie per la risposta.

DROPS Design 20.12.2017 kl. 17:01:

Buongiorno Barbara. Può provare in questo modo: provi a iniziare a diminuire su un giro con DDR. Inserisca i segnapunti nel lavoro come indicato nel testo; poi per diminuire, lavora insieme a rov le 2 maglie che seguono il segnapunti. Al giro successivo, lavora la maglia dopo il segnapunti a rovescio. Buon lavoro!

Tone Stenersen 24.11.2017 - 08:28:

Det står følgende i oppskriften: "2 kant-masker i RILLE - se forklaring over, 1 rett, strikk MØNSTER etter diagram A.1 (= 9-10 rapporter à 3 masker), 2 kantmasker". Skal det strikkes 1 rett etter de 2 kantmaskene før en starter på mønsteret både på retta og vranga? Stemmer det at kantmaskene blir riller i begge sider?

DROPS Design 25.11.2017 kl. 07:32:

Hei Tone, Kantmaskene er strikket i rille hele veien og du har 1 rett etter disse 2 kantmaskene første på runden som går sammen med 1 rett i mønsteret. På slutten av runden er 1 vrang (siste maske i mønsteret) og deretter 2 kantmasker i rille. God fornøyelse!

Luce Pasquet 08.11.2017 - 15:02:

Bonjour, je suis en train de faire ce bonnet, mais je suis bloquée aux diminutions. Vous dites de continuer A1 et de tricoter à l'envers les 2 mailles qui suivent les marqueurs J'ai essayé mais tout est décalé. Je ne comprend pas.

DROPS Design 08.11.2017 kl. 16:05:

Bonjour Madame Pasquet, continuez en suivant A.1 tout en tricotant les mailles comme elles se présentent avec les 3 m de A.1 comme avant entre les diminutions et 1 m end (3ème m de A.1) et 1 m env (les 2 premières m de A.1) au niveau des diminutions. Bon tricot!

Post a comment to pattern DROPS 182-17

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.