DROPS / 177 / 8

Blue Rainbow by DROPS Design

Knitted shawl work in garter stitch with short rows and gradient stripes in 1 strand DROPS Alpaca and 2 strands DROPS Kid-Silk.

DROPS design: Pattern z-791
Yarn group A + A + A or D
Length at the top: approx. 160 cm
DROPS ALPACA from Garnstudio (belongs to yarn group A)
200 g colour 101, white
100 g colour 6205, light blue
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
125 g colour 07, light grey blue
100 g colour 08, grey blue
75 g colour 01, off white

If the shawl is worked with one colour 300 g DROPS Alpaca and 225 g DROPS Kid-Silk are used.

DROPS CIRCULAR NEEDLE (60 or 80 cm) SIZE 5.5 mm – or size needed to get 15 stitches and 26 rows in garter stitch with 1 strand Alpaca + 2 strands Kid-Silk = width 10 cm and 10 cm vertically. 1 fan measures approx. 29 cm vertically at the widest and 101 cm in length along the straight edge.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Alpaca
from 3.20 £ /50g
DROPS Alpaca uni colour DROPS Alpaca uni colour 3.20 £ /50g
Wool Warehouse Direct Ltd
DROPS Alpaca mix DROPS Alpaca mix 3.30 £ /50g
Wool Warehouse Direct Ltd

75% Mohair, 25% Silk
from 3.80 £ /25g
DROPS Kid-Silk uni colour DROPS Kid-Silk uni colour 3.80 £ /25g
Wool Warehouse Direct Ltd
DROPS Kid-Silk long print DROPS Kid-Silk long print 3.80 £ /25g
Wool Warehouse Direct Ltd
DROPS Needles & Hooks
You can get the yarn to make this pattern from 53.40£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
Use yarn from both inside and outside of the ball.

All fans are worked with 1 strand Alpaca + 2 strands Kid-Silk (= 3 strands) – READ DOUBLE YARN TIP.
FAN 1: 1 strand Alpaca light blue + 2 strands Kid-Silk grey blue.
FAN 2: 1 strand Alpaca light blue + 1 strand Kid-Silk grey blue + 1 strand Kid-Silk light grey blue.
FAN 3: 1 strand Alpaca white + 1 strand Kid-Silk grey blue + 1 strand Kid-Silk light grey blue.
FAN 4: 1 strand Alpaca white + 2 strands Kid-Silk light grey blue.
FAN 5: 1 strand Alpaca white + 1 strand Kid-Silk light grey blue + 1 strand Kid-Silk off white.
FAN 6: 1 strand Alpaca white + 2 strands Kid-Silk off white.


Begin at the top with the darkest blue and work fans in gradient colours towards the last fan in off white.
Cast on 152 stitches on circular needle size 5.5 mm with 1 strand Alpaca light blue and 2 strands Kid-Silk grey blue (= 3 strands). Work 1st fan back and forth on circular needle as follows:
ROW 1 (= right side): Knit 152 stitches.
ROW 2 (= wrong side): Knit all stitches.
ROW 3: Knit 148 stitches. 
ROW 4: Knit all stitches.
ROW 5: Knit 144 stitches. 
ROW 6: Knit all stitches.
ROW 7: Knit 140 stitches. 
ROW 8: Knit all stitches.
Continue like this by working 4 stitches less on every other row (i.e. on every row from right side) until 4 stitches remain. Knit 2 rows back and forth over these 4 stitches and then knit 2 rows over all 152 stitches = 1 fan.
Cast off somewhat loosely the first 14 stitches on row, knit the rest of row and loosely cast on 7 new stitches at the end of this row = 145 stitches on row. Knit 1 row from wrong side. Switch colour to the next fan - see explanation on GRADIENT COLOURS. Knit 1 row from right side and loosely cast on 7 new stitches at the end of this row = 152 stitches on row. Knit 1 row from wrong side *. Continue to work fans the same way by repeating from 1st row to * until there are 6 fans in total on shawl. Loosely cast off by knitting from right side and fasten the strands.

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 177-8) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (30)

Raymonde Pilote 08.04.2019 - 03:55:

Bonjour concernant le raccourci est-ce que l’on le fait à partir des 4 premières mailles ou si c’est 2 au début du rang et 2 à la fin du rang

DROPS Design 08.04.2019 kl. 08:34:

Bonjour Mme Raymonde Pilote! Vous commencez les rangs raccourcis toujours des le debut du rang sur l'endroit, sur l'envers vous tricotez sur le nombre de mailles de plus en plus petit. Suivez les explications et regardez le video ICI. Bon trciot!

Sara 04.03.2019 - 07:30:

Como quito los 4 puntos, serematan al principio.

DROPS Design 03.04.2019 kl. 00:33:

Hola Sara. Los 4 puntos se quedan en espera en la aguja cada vez que se trabaja una fila acortada. Se trabajan sobre todos los puntos al final de cada abanico. Mira el vídeo sobre las filas acortadas:

Nunzia 29.01.2019 - 17:06:

Non riesco a capire dopo aver diminuito le 14 maglie all'inizio del ferro e aumentato le 7 alla fine per ricreare lo spicchio la spiegazione dice altre sette maglie dove e come continuare, grazie

DROPS Design 29.01.2019 kl. 17:15:

Buongiorno Nunzia. Dopo aver diminuito le 14 maglie e avviato le 7 m alla fine del ferro, lavora a diritto il ferro di ritorno (quindi sul rovescio del lavoro), senza aumentare. Poi lavora un ferro a diritto sul diritto del lavoro e alla fine di questo ferro avvia 7 maglie. Buon lavoro!

Nunzia 29.01.2019 - 16:28:

Non riesco a capire dopo aver completato il primo spicchio a ricominciare aggiungendo le sette maglie e poi le altre sette dove per favore fatemi capire, grazie

Véronique Planchon 22.06.2018 - 17:38:

Bonjour.. je ne comprends pas bien les rangs raccourcis... je tricote 148 mailles .. je tourne. . Ok .. je re tricote donc 148 mailles.. ce qui ne compte pas pour le rang 2 ? C est en tricotant les 152 mailles une nouvelle fois?\r\nJ ai essayé de transposer en jersey pour mieux comprendre.. C est pire

DROPS Design 25.06.2018 kl. 09:45:

Bonjour Mme Planchon, vous tricotez 2 rangs sur 152 m (= 1er rang sur l'endroit, 2ème rang sur l'envers), puis 2 rangs sur 148 m (= 1er rang sur l'endroit, 2ème rang sur l'envers), puis 2 rangs sur 144 m (= 1er rang sur l'endroit, 2ème rang sur l'envers) et ainsi de suite en tricotant toujours 4 m en moins, donc ensuite 2 rangs sur 140 m (en commençant sur l'endroit), 2 rangs sur 136 m et ainsi de suite jusqu'à ce qu'il ne reste que 4 m. Bon tricot!

Hanneke 22.06.2018 - 07:58:

Ik heb inmiddels gezien wat ik verkeerd zag. Ik had niet gezien dat er nog een extra naald aan de verkeerde zijde gebreid moest worden tussen het opzetten van de 2 maal zeven steken.

Hanneke 20.06.2018 - 09:38:

Aan het einde van een waaier worden eerst 14 steken worden afgekant en dan aan het andere eind 7 steken opgezet. Op de teruggaande naald worden weer 7 aan het eind opgezet. Klopt het dat op het einde waar je 14 steken hebt afgekant er 7 steken loshangen? Ik zie geen ruimte tussen de verschillende waaiers op het plaatje, maar het patroon lijkt dat wel te suggereren.

Cveticanin 30.05.2018 - 20:33:

Bonsoir\r\nce châle me plait bien mais je voulais savoir vous dites au début châle rang 3 de tricoter 148 mailles mais je fais quoi des 4 mailles restantes je les rabats ?\r\nmerci d\\\'avance

DROPS Design 30.05.2018 kl. 22:14:

Bonsoir Cveticanin, vous faites les rangs raccourcis comme dans le video ci-apres Comment tricoter des rangs raccourcis au point mousse - méthode de base. Cela veut dire que dans les rangs pairs (sur l’envers), là ou vous avez ‘Tricoter toutes les mailles à l'endroit’, vous tricotez toutes les 152 mailles à l’endroit. Bon travail!

Ingrid Figge 08.03.2018 - 17:03:

Wie wird das Tuch getragen

AMIEL Irène 23.08.2017 - 19:09:

Bonjour, Je tricote ce châle et me pose une question pour la fin : ne faut-il pas rabattre les 152 mailles dès que l'on a fini le 6ème éventail ? L'explication du modèle en français laisse entendre que l'on fait encore une fois les rangs -14 +7, envers, +7, envers avant de rabattre les mailles. Autrement dit, le * n'est-il pas mal placé ? Merci d'avance

DROPS Design 29.08.2017 kl. 11:47:

Bonjour Mme Amiel, vous avez effectivement à priori raison, quand le dernier éventail est fait, on ne mont pas les 7 mailles supplémentaires, on rabat simplement toutes les mailles. Bon tricot!

Post a comment to pattern DROPS 177-8

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.