DROPS / 137 / 29

Tranquility by DROPS Design

Crochet DROPS shawl in "BabyAlpaca Silk".

Tags: lace, shawls, top down,

DROPS design: Pattern no BS-018
Yarn group A
--------------------------------------------------------
Measurements: Approx. height mid back: 70 cm
Approx. width at top: 150 cm

Materials: DROPS BABYALPACA SILK from Garnstudio
200 g colour no 8112, ice blue
100 g colour no 1760, light grey purple

DROPS CROCHET HOOK SIZE 3.5 mm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (49)

70% Alpaca, 30% Silk
from 4.10 £ /50g
DROPS BabyAlpaca Silk uni colour DROPS BabyAlpaca Silk uni colour 4.10 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 24.60£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
PATTERN:
See diagrams M.1 and M.2, both patterns are also described below.
BOBBLE:
1 bobble = 3 tr worked tog. This is done as follows: Work 1 tr but wait with last pull through, work 1 more tr, wait with last pull through, work 1 more tr but wait with last pull through, make 1 YO and pull thread through all 4 loops on hook.
----------------------------------------------------------

SHAWL:
The piece is worked from the top and down to tip.

Also see diagram M.1.
Work 11 ch with ice blue on hook size 3.5 mm.
ROW 1:
Turn and work 1 tr in 7th ch from hook (= 1 tr + 3 ch), then work 1 tr in each of the last 4 ch, 3 ch and 1 more tr in last ch, turn piece.
ROW 2:
6 ch, 7 tr in first ch-loop, 2 ch, skip 2 tr, 1 tr in next tr, 2 ch, skip 2 tr, 7 tr in next ch-loop, 3 ch and 1 more tr in same ch-loop, turn piece.
ROW 3:
6 ch, 1 tr in first ch-loop, 2 ch, skip 2 tr, 1 tr in each of the next 3 tr, 2 ch, skip 2 tr and 2 ch, in next tr work 1 tr + 3 ch + 1 tr, 2 ch, skip 2 ch and 2 tr, 1 tr in each of the next 3 tr, 2 ch, skip 2 tr, in last ch-loop work 1 tr +3 ch + 1 tr, turn piece.
ROW 4:
6 ch, 7 tr in first ch-loop, 2 ch, skip 1 tr + 2 ch + 1 tr, 1 tr in next tr, 2 ch, skip 1 tr + 2 ch + 1 tr, in middle ch-loop work: [7 tr, 2 ch, 1 tr, 2 ch and 7 tr], 2 ch, skip 1 tr + 2 ch + 1 tr, 1 tr in next tr, 2 ch, 7 tr in last ch-loop, 3 ch and 1 more tr in last ch-loop, turn piece.
ROW 5:
6 ch, 1 tr in first ch-loop, 2 ch, skip 2 tr, 1 tr in each of the next 3 tr, 2 ch, * skip 2 tr + 2 ch, in next tr work 1 tr + 3 ch + 1 tr, 2 ch, skip 2 ch + 2 tr, 1 tr in each of the next 3 tr, 2 ch *, repeat from *-* until middle tr on piece, skip 2 tr + 2 ch, in the middle tr on piece work 1 tr + 3 ch + 1 tr, skip 2 ch + 2 tr, 2 ch, 1 tr in each of the next 3 tr, 2 ch, ** skip 2 tr + 2 ch, in next tr work 1 tr + 3 ch + 1 tr, skip 2 ch + 2 tr, 2 ch, 1 tr in each of the next 3 tr, 2 ch **, repeat from **-** until 1 ch-loop remains on row, in this work 1 tr + 3 ch + 1 tr, turn piece.
ROW 6:
6 ch, * 7 tr in first ch-loop, 2 ch, skip 1 tr + 2 ch + 1 tr, 1 tr in next tr, 2 ch, skip 1 tr + 2 ch + 1 tr *, repeat from *-* until middle ch-loop, in this work: [7 tr, 2 ch, 1 tr, 2 ch and 7 tr], ** 2 ch, skip 1 tr + 2 ch + 1 tr, 1 tr in next tr, 2 ch, skip 1 tr + 2 ch + 1 tr, 7 tr in next ch-loop **, repeat from **-** the rest of row, finish with 3 ch and 1 more tr in last ch-loop, turn piece.
Repeat 5th and 6th row until piece measures approx. 60 cm in the middle and 120 cm in breadth - finish after 5th row, cut the thread. Continue with LACE - see explanation below.

LACE – also see diagram M.2:
Switch to light grey purple. First work 1 row with dc as follows:
1 ch, 2 dc in each of the first 2 ch-loops, 1 dc in each of the next 3 tr, * 2 dc in next loop, 3 dc in next loop, 2 dc in next loop, 1 dc in each of the next 3 tr *, repeat from *-* until the middle 3 ch-loops, work 2 dc in first loop, 7 dc in second loop (= middle loop) and 2 dc in last loop, 1 dc in each of the next 3 tr, repeat from *-* the rest of row, finish with 2 dc in each of the last 2 ch-loops. Turn piece.
ROW 1:
5 ch, in first dc work: 1 dtr, 1 ch, 1 dtr and 1 ch, * skip 4 dc, 1 dc in next dc, 1 ch, skip 4 dc, in next dc work: [1 dtr, 1 ch] 5 times *, repeat from *-* until 5 dc remain at the tip of shawl (= in the middle), skip 2 dc, 1 dc in next dc, 1 ch, skip 2 dc, ** in next dc work: [1 dtr, 1 ch] 5 times, skip 4 dc, 1 dc in next dc, 1 ch, skip 4 dc **, repeat from **-** until 5 dc remain, skip the first 4 dc, in last dc work: 1 dtr, 1 ch, 1 dtr, 1 ch and 1 dtr. Turn piece.
ROW 2:
1 ch, 1 dc in first dtr, * 2 ch, in next dc work: [1 triple tr, 2 ch] 4 times, skip 2 dtr, work 1 dc in next dtr *, repeat from *-* the rest of row but finish with 1 dc in 4th ch from beg of previous row. Turn piece.
ROW 3:
1 ch, 1 dc in first dc, * 4 ch, skip 1 ch-loop, in next ch-loop work 1 BOBBLE – see explanation above, 3 ch, 1 bobble in next ch-loop, 3 ch, 1 bobble in next ch-loop, 4 ch, 1 dc in next dc *, repeat from *-* the rest of row. Turn piece.
ROW 4:
1 ch, 3 dc in first ch-loop, * 4 ch, 1 tr in the first of the 4 ch (= 1 picot), 3 dc in next ch-loop *, repeat from *-* the rest of row. Cut the thread.

This pattern has been corrected. .

Updated online: 02.05.2014
under SHAWL and ROW 5:
6 ch, 1 tr in first ch-loop, 2 ch, skip 2 tr, 1 tr in each of the next 3 tr, 2 ch, * skip 2 tr + 2 ch, in next tr work 1 tr + 3 ch + 1 tr, 2 ch, skip 2 ch + 2 tr, 1 tr in each of the next 3 tr, 2 ch *, repeat from *-* until middle tr on piece, skip 2 tr + 2 ch, in the middle tr on piece work 1 tr + 3 ch + 1 tr, skip 2 ch + 2 tr, 2 ch, 1 tr in each of the next 3 tr, 2 ch, ** skip 2 tr + 2 ch, in next tr work 1 tr + 3 ch + 1 tr, skip 2 ch + 2 tr, 2 ch, 1 tr in each of the next 3 tr, 2 ch **, repeat from **-** until 1 ch-loop remains on row, in this work 1 tr + 3 ch + 1 tr, turn piece.

Diagram

= 1 ch
= 1 dc
= 1 tr
= 1 dtr
= 1 triple tr
= 1 bobble: see explanation in pattern
= 1 picot: 4 ch, 1 tr in first ch
= beg here

Comments (49)

Leave your comment!

Ute Vogt 13.01.2019 - 16:59:

Auf Seite 2/5 Reihe 3 hat sich gleich zweimal ein Fehlerteufelchen eingeschlichen.

DROPS Design 14.01.2019 kl. 12:07:

Liebe Frau Vogt, ein Fehler (Reihe 3, Dreiecktuch) sollte korrigiert werden. Viel Spaß beim häkeln

Eva 09.10.2018 - 23:35:

Den svenska rättelsen av varv fem är inte korrekt, det är samma som i beskrivningen. Den rätta versionen finns i originalmönstret (länk finns till vänster om mönstret). Bra om det blir korrekt även i den svenska versionen

Liliana Bisognin 17.07.2016 - 18:38:

Altro scialle fatto grazie

DUVAL 24.06.2016 - 07:09:

Bonjour, Je suis débutante en crochet et j'avoue avoir du mal à comprendre les diagrammes, je me rabats donc sur les explications (quand il y en a) pour me lancer. Pour ce modèle, on dit : monter une chainette de 11 mailles en l'air.. mais pourquoi le premier rang commence par "tourner" ? Merci

DROPS Design 24.06.2016 kl. 08:52:

Bonjour Mme Duval, le châle se tricote en allers et retours (= en rangs), on va ainsi tourner à la fin de chaque rang pour travailler alternativement sur l'endroit et sur l'envers. La vidéo ci-dessous montre comment réaliser M.1, elle pourra sans doute vous aider. Bon crochet!

Grosbot 10.06.2016 - 15:48:

Très beau modèle bien réussi avec très bonnes explications un rendu magnifique!!!!merci

Isabelle Wyckmans 25.03.2016 - 21:12:

Merci pour les explications de ce très beau modèle!

Grazia 26.01.2016 - 22:39:

Siete fantastici...non ci abbandonate mai! Grazie grazie ancora grazie

Katja 20.01.2016 - 20:49:

Hallo, das Tuch ist sehr schön geworden allerdings habe ich von der 2. Farbe (für die Spitzen) nur 50 g Wolle anstatt wie in der Anleitung 100g gebraucht. Habe ich was falsch gemacht oder stimmt die Angabe in der Anleitung nicht? Danke

DROPS Design 24.01.2016 kl. 20:25:

Antwort siehe unten! :-)

Katja Grumbach 16.12.2015 - 22:35:

Hallo, das Tuch ist sehr schön geworden allerdings habe ich von der 2. Farbe (für die Spitzen) nur 50 g Wolle anstatt wie in der Anleitung 100g gebraucht. Habe ich was falsch gemacht oder stimmt die Angabe in der Anleitung nicht? Danke

DROPS Design 20.12.2015 kl. 17:01:

Die Wollmengen werden immer auf ganze Knäuel aufgerundet, d.h. es werden möglicherweise nicht ganze 100 g benötigt, aber mehr als 50 g. Wenn Ihre Maschenprobe geringfügig anders ausgefallen ist, kann es sein, dass Sie weniger Garn verbraucht haben.

Ilka 08.03.2015 - 14:47:

Ich möchte gerne nachfragen, ob das Tuch noch gespannt werden sollte. Zwar steht in der Anleitung nichts davon, aber ich bin diesbezüglich unsicher. Ansonsten ist das Tuch sehr schön geworden und die BabyAlpacaSilk zu verhäkeln ein Traum.

DROPS Design 09.03.2015 kl. 09:43:

Ja, Sie können es noch spannen oder zumindest anfeuchten, auf Maß ziehen und trocknen lassen. Das Lochmuster kommt dann noch besser zur Geltung. Schön, dass Ihnen das Tuch so gut gefällt, und BabyAlpaca Silk fühlt sich wirklich toll an und ist auch sehr angenehm auf der Haut zu tragen. Viel Spaß mit Ihrem neuen Schmuckstück! :-)

Post a comment to pattern DROPS 137-29

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.