DROPS Paris
100% Cotton
from 1.10 £ /50g

Order

DROPS Safran
100% Cotton
from 1.30 £ /50g

Order

DROPS Needles & Hooks

Order

Get the yarn to make this pattern from 13.50£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

College Campus Tote

Knitted bag in DROPS Paris and DROPS Safran. The piece is worked in the round with stripes, crocheted edge, fringes and strap.

DROPS 229-3
DROPS Design: Pattern no w-877
Yarn group C + A
-------------------------------------------------------

SIZE:
Width = 32 cm. Height = 36 cm.

MATERIALS:
DROPS PARIS from Garnstudio (belongs to yarn group C)
200 g colour 17, off white
And use:
DROPS SAFRAN from Garnstudio (belongs to yarn group A)
50 g colour 18, off white
50 g colour 01, desert rose
50 g colour 12, peach
50 g colour 10, vanilla cream
50 g colour 04, sage green
50 g colour 50, mint
50 g colour 31, apple green

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 5.5 MM: Length 60 cm.

CROCHET HOOK:
DROPS HOOK SIZE 4.5 MM.

KNITTING TENSION:
16 stitches in width and 25 rows in height with pattern and 1 strand of each quality = 10 x 10 cm.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

CROCHET TENSION:
16 double crochets in width and 18 rows in height = 10 cm.
Hook size is only a guide. If you get too many stitches on 10 cm, change to a larger hook size. If you get too few stitches on 10 cm, change to a smaller hook size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

More like this:
Women Accessories Bags Big Bags Boho Chic stripes

UK
Ireland

DROPS Paris
100% Cotton
from 1.10 £ /50g

Order

DROPS Safran
100% Cotton
from 1.30 £ /50g

Order

DROPS Needles & Hooks

Order

Get the yarn to make this pattern from 13.50£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.

-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked in the round):
1 ridge in height = 2 rounds; Knit 1 round and purl 1 round.

STRIPES:
The whole piece is worked with 1 strand DROPS Paris and 1 strand DROPS Safran. Paris off-white is used all the way through, the colours in Safran change.
STRIPE 1: Desert rose for 5 cm.
STRIPE 2: Peach for 4 cm.
STRIPE 3: Vanilla cream for 4 cm.
STRIPE 4: Sage green for 4 cm.
STRIPE 5: Mint for 4 cm.
STRIPE 6: Apple green for 4 cm.
STRIPE 7: Off white for 4 cm.

PATTERN:
ROUNDS 1-3: Knit
ROUND 4: Purl
Repeat rounds 1-4 onwards.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

BAG – SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round, bottom up. An edge is crocheted around the opening, the bottom is crocheted together and a strap crocheted to finish.

BAG:
Cast on 102 stitches with circular needle size 5.5 mm and 1 strand DROPS Paris and strand DROPS Safran, both off-white.
Work 1 RIDGE in the round – read description above. Then work STRIPES and PATTERN in the round – read description above. REMEMBER THE KNITTING TENSION!
When all the stripes are finished, work 2 ridges with 1 strand each quality, both off-white. Cast off with knit.

ASSEMBLY:
Use hook size 4.5 mm and 1 strand of each quality, off-white.
Work around the cast-off edge as follows:
Fasten the strands with 1 slip stitch in the first stitch on the round, work 2 chain stitches, * skip 1 stitch, work 1 double crochet in the next stitch, 1 chain stitch *, work from *-* the whole round, finish with 1 slip stitch in the 2nd chain stitch at the beginning of the round. Cut and fasten the strands.
Lay the bag flat, with the beginning of the round to one side.
Close the bottom of the bag as follows:
Fasten the strand with 1 slip stitch in the first stitch on the round, then crochet through the outermost loop of both stitches in both layers as follows: 1 double crochet through each pair of stitches = 51 double crochets.
Work back and forth over the 51 stitches according to diagrams A.1, A.2 and A.3 as follows: Work A.1, then A.2 until there are 9 stitches left, then work A.3. Cut and fasten the strands.

FRINGES:
Fasten fringes in the chain-spaces at the bottom of the bag as follows:
Cut 8 strands Paris and 8 strands Safran, off-white, of 20 cm in length. Lay the strands together, thread them half way through the chain-space. Wind a strand around the top of each fringe and tie a tight knot. Fasten 1 fringe in each chain-space.

SHOULDER STRAP:
Use crochet hook size 4.5 mm and 1 strand of each quality in off-white. Lay the bag flat, start so the strap comes to the side of the bag and work as follows:
Fasten the strand with 1 slip stitch in a chain stitch, * work 1 double crochet in the next double crochet, 1 double crochet around the next chain stitch *, work from *-* 3 times and work 1 double crochet in the next double crochet = 7 double crochets. Turn.
Work 1 chain stitch (in addition to the other stitches), 1 double crochet in each stitch. Work back and forth like this until the strap measures 64 cm - NOTE! the strap may stretch, so make it shorter rather than longer. Cut the strands, leaving ends of 15 cm. Sew the strap tightly to the opposite side of the bag.

Diagram

	= double crochets from crocheting the bottom together, start on next row
	= start on this row
	= 2 chain stitches
	= 2 chain stitches (chain-space)
	= 1 slip stitch around chain-space below
	= 1 half-treble crochet in stitch/around chain-space below
	= around chain-space work: 2 treble crochets, 1 double-treble crochet, 2 chain stitches, 1 double-treble crochet, 2 treble crochets

© 1982-2024 DROPS Design A/S We reserve all rights. This document, including all its sub-sections, has copyrights.
What can you do with our patterns? You can share DROPS patterns online, using the pattern original picture, materials, name and number. But you are NOT ALLOWED to reproduce the complete pattern digitally in any way. Yarn stores are welcome to use the DROPS pattern database to promote the sale of our assortment. You can print out our patterns, make as many copies as you’d like. The only thing we ask is that you don't make any changes / additions to the original printed document. And that the patterns according to the DROPS philosophy are given out to the consumers for free. Editorials that wish to publish our patterns in printed books or magazines can contact us for more information. The sale of garments based on DROPS patterns is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of clothing labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”. The use of DROPS photos for marketing purposes/sales is only permitted in connection with the use/sale of DROPS products. The photos may not be cut or edited and the logo should be clearly visible.
We reserve the right to withdraw the permission for use of our patterns at any time, notwithstanding the reason.

Each of our patterns has specific tutorial videos to help you.

These step-by-step tutorials might also help you:

Do you have a question? See a list of frequently asked questions (FAQ)

Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

How do I use the yarn calculator?

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

What size should I knit?

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Why does my garment pill?

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Comments / Questions (11)

Karen wrote:

Just finished the bag and it looks great. I love the fact that it uses both knit and crochet. I have to say that I found the instructions difficult to follow, particularly for the bottom of the bag. I’m not used to following charts and the crochet instructions were not clear without using the chart. I did sort it out buy by looking at the photo and figuring it out from there. Perhaps you could include written crochet instruction in future patterns rather than, or in addition to the chart.

20.03.2024 - 16:03

Kiin Knowles wrote:

Hi. I love, LOVE this, but unfortunately, I can not knit, Is this by any chance have a crochet pattern? Kindly

23.09.2023 - 15:32

DROPS Design answered:

Dear Kiin, we don't make custom patterns, but you can see here all of our crochet bags: https://www.garnstudio.com/search.php?action=search&unsorted=bag&mt=2&lang=en. You could try working this bag with double/ single crochets or working relief pattern and changing colours as shown. Happy crocheting!

24.09.2023 - 23:16

Lily wrote:

This looks beautiful

19.06.2022 - 07:46

Marianne Juhler wrote:

Hej. I skriver naturhvid både som nr. 17 og 18, men den ene er hvid i farveskalaen, så hvad mener I hvor? De 200 g er det naturhvid eller hvid?

23.04.2022 - 11:37

Hei Marianne, Til denne vesken brukes det 2 kvaliteter, både DROPS Paris og DROPS Safran. Det brukes 200 gram DROPS PAris naturhvit farge nr 17 og det brukes 50 gram DROPS Safran naturhvit farge nr. 18 (denne fargen er litt lysere enn Paris nr. 17, men betegnes som naturhvit). Om du ser på fargekartet til både DROPS Paris og DROPS Safran vil du se at vi også har fargen hvit i begge kvalitetene (Safran farge nr. 17 hvit og Paris farge nr. 16 hvit, men disse brukes ikke i denne oppskriften). mvh DROPS Design

25.04.2022 - 11:01

Anita wrote: