DROPS Super Sale - SAVE 30% on 5 soft merino yarns!

How to weave in ends when working a new colour in the round

Video thumbnail for How to weave in ends when working a new colour in the round
In this DROPS video we show how you can weave in ends on your work.

When knitting with multiple colors or when just changing from one to another color, you can weave in the end as you continue with the new color. When you start the new color you want to make sure to twist the loose end around your previous color to avoid a hole, then place the working yarn behind the tail, and pick up the yarn alternating above and under the tail end to weave it in. Weave for about 4-6 sts and then you can cut the remaining tail. This way you don't have to fasten the threads at the end.

You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.

Patterns using this technique

DROPS 254-35

DROPS 254-35
DROPS 217-11

DROPS 217-11
DROPS 216-28

DROPS 216-28
DROPS Children 37-11

DROPS Children 37-11
Change language:

Video #138, listed in: Learn to knit, Assembly Videos, Other techniques, Knitting tips & tricks, Other knitting tips & tricks, Switch yarn, Weave in ends

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Armanda wrote:

Ich „vernähe“ im Strickstück indem ich den neuen Faden und den alten 10 Maschen zusammen verstricke. Die Stelle ist dann etwas dicker, da doppeltes Garn, aber nach dem Waschen nicht mehr zu sehen. Ist das falsch?

21.07.2025 - 05:35

DROPS Design :

Liebe Armanda, wenn Sie den Faden doppelt verstricken, also die Maschen mit doppeltem Faden abstricken, wird die Stelle dicker, und je nach Garn ist das auch nach dem Waschen weiterhin sichtbar. Wenn Sie aber den Anfangsfaden der neuen Farbe wie im Video gezeigt auf der Rückseite der Arbeit mitführen, dann ist diese Stelle auf der Vorderseite nicht sichtbar. Der Anfangsfaden wird ja, wie im Video gezeigt, in einer "geraden Linie" mitgeführt und nicht als Masche gestrickt.

28.07.2025 - 20:41

Country flag Christine wrote:

Bonjour, Je veux tricoter des rayures de plusieurs couleurs, j'ai bien compris comment rentrer le nouveau fil, mais comment rentrer le fil que j'abandonne? En même temps? De la même manière?Au rang suivant? Merci de me répondre.

15.05.2025 - 17:12

DROPS Design :

Bonjour Christine, vous pouvez aussi le rentrer à la fin comme dans cette vidéo (en jersey). Bon tricot!

16.05.2025 - 08:42

Country flag Alexandra wrote:

Ich glaube ich stehe auf der Leitung! Was passiert denn dann mit dem grünen Faden? Den muss ich dich dann erst recht vernähen?!

01.10.2020 - 11:25

DROPS Design :

Liebe Alexandra, in diesem Video, der grüne Faden wird dann wiedergestrickt, das Video zeigt wie man die beiden anderen Fäden (natur und rosa) einwebt. Viel Spaß beim stricken!

02.10.2020 - 08:57

Country flag Coraline wrote:

Bonjour, je tricote selon la méthode anglaise/américaine et je ne sais pas comment adapter cette vidéo avec mon tricot. Pouvez vous m'aider ? merci beaucoup

25.04.2019 - 23:06

DROPS Design :

Bonjour Coraline, seule la main dans laquelle on tient le fil est différente, le reste se passera de la même façon, c'est le même principe, quelle que soit la façon de tricoter. Bon tricot!

26.04.2019 - 09:36

Country flag Cookie wrote:

Das ist ja Klasse! Aber was ist mit dem alten Faden? Der muss dann ganz normal vernäht werden, oder strickt man diesen dann in der nächsten Reihe/Runde mit ein? Und gibt es eine Variante bei linken Maschen?

10.03.2019 - 17:36

DROPS Design :

Liebe Cookie, dieses Video zeigt, wie man den alten Faden dann vernäht. Viel spaß beim stricken!

25.03.2019 - 12:50

Country flag Mieke Torfs wrote:

Hoe werk ik de draadjes weg bij dikke draad? Ik heb de werfmethode geprobeerd maar geeft toch een knobbeltje. En als je het draadje alleen een paar steken meebreit, komt de laatste steek dan niet los als je het eindje afknipt? Alvast bedankt voor de info

24.07.2018 - 10:12

DROPS Design :

Dag Mieke, Voor dikker garen en het wisselen van meerdere kleuren is er niet echt een andere methode voor het wegwerken van de draden via deze weefmethode, zodat er geen bobbel/verdikking zal ontstaan. Je zult altijd enigszins een bobbel houden. Deze is bij dikker garen natuurlijk wat dikker, maar in verhouding tot het breiwerk hetzelfde als bij dun garen en zal het niet opvallen als het kledingstuk gedragen wordt.

23.08.2018 - 19:53

Country flag Hanna Refsum wrote:

Dette er flott og greit , men hva med den tråden man skifter fra ? Den må jo også festes ?

12.09.2015 - 21:30

Country flag Nathalie TD wrote:

C'est très bien mais comment fait-on avec des points à l'envers, quand on tricote, par exemple, des côtes ?

10.09.2013 - 00:35

DROPS Design :

Bonjour Nathalie TD, vous trouverez dans l'index d'autres vidéos montrant comment rentrer les fils dans les côtes par ex. Bon tricot!

10.09.2013 - 09:29

Sadaf wrote:

Brilllllliant.......

06.11.2012 - 15:06

Amy wrote:

Brilliant! Even I understand it :)

24.04.2012 - 10:54

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for Crochet tip for fastening strands
5:37
Crochet tip for fastening strands

In this DROPS video we show how to avoid sewing many strands after colour change. Work the first 2 stitches at beginning of every row with new colour with double yarn (same colour). Then place yarn end along stitches from previous row and work around it so that the yarn end is hidden inside the stitches. In addition should the yarn end left at the end of row also be placed along the stitches when turning the piece to work around this yarn end as well. The way the strands are fastened without using a needle. We use the yarn DROPS Snow in the video. You must read the pattern to be able to follow this video properly. You’ll find a pattern where you can use this technique by clicking on one of the picture below.
Video thumbnail for How to weave in cotton tails
6:17
How to weave in cotton tails

In this DROPS video we show how you can weave in tails on your crochet or knitted project. When using a cotton yarn, especially when it's thicker, it can be tricky. The tails will show and also may come out again when washing and wearing. A great trick is to split the strand into multiple thinner strands and then sew these thinner strands away in different directions. This usually comes out invisible and will not come undone. You must read the pattern to be able to follow. You’ll find patterns with this technique by clicking on the pictures below.
Video thumbnail for How to weave in tails in ribbing
1:44
How to weave in tails in ribbing

In this DROPS video we show how you can weave in tails in ribbing. Our sample on the video is a 2 by 2 ribbing. Always weave in your tails on the wrong side of your rib knitted piece. With the needle and yarn go to the first section of K sts, weave through each stitch diagonal for 5-7 sts, turn and go down through each st on the other side of the stitch. As you can see with this method your weaved in tail will not show on your right side. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
Video thumbnail for How to weave in tails in stocking stitch
2:47
How to weave in tails in stocking stitch

In this DROPS video we show how you can weave in tails in stocking stitch. Always weave in your tails on the wrong side of your knitted stocking st piece. With the needle and yarn follow the stitches sideways over 2 rows. Halfway through video we show you the same thing with a contrasting yarn to make it easier to follow. As you can see with this method your weaved in tail will not show on your right side. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
Video thumbnail for How to weave in tails in garter st
3:14
How to weave in tails in garter st

In this DROPS video we show how you can weave in tails in garter stitch. Always weave in your tails on the wrong side of your knitted garter stitch piece. With the needle and yarn follow the stitches sideways over 2 rows. Halfway through video we show you the same thing with a contrasting yarn to make it easier to follow. As you can see with this method your weaved in tail will not show on your right side. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
Video thumbnail for Mittens - before and after felting
0:59
Mittens - before and after felting

In this DROPS video we show a pair of mittens before and after felting. To prevent the thumb from felting together, turn the mitten to WS (wrong side) and place a narrow silk ribbon along the thumb. Secure the ribbon with a safety pin – NB: insert the pin vertically towards the tip of the thumb so it is easy to remove after felting. Turn the mitten back to RS (right side) before felting. 1. Place the mittens in the washing machine with a wool detergent that does not contain enzymes or optical brighteners. 2. Wash at 40 °C / 104 °F, normal spin, no pre-wash. 3. Stretch and shape the mittens to the correct measurements while still wet. 4. If they turn out too small: soak in water until completely wet, then stretch back to the desired size. 5. Afterwards, the mittens can be washed as any other wool garment.