DROPS / 172 / 30

Jacinta by DROPS Design

Set consists of: Knitted DROPS hat and scarf with rib and lace pattern in ”Kid-Silk”.

Tags: hats, lace, scarves, sets,

DROPS design: Pattern no ks-118
Yarn group A
Size: S /M – M/L
DROPS KID-SILK from Garnstudio
25-25 g colour no 05, heather

Measurements: approx. 33 x 155 cm
DROPS KID-SILK from Garnstudio
100 g colour no 05, heather

DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (40 cm) SIZE 3 mm - or size needed to get 24 sts x 32 rows in stocking st = 10 x 10 cm.
DROPS CIRCULAR NEEDLE (40 cm) SIZE 2.5 mm for rib - or size needed to get 26 sts x 34 rows in stocking st = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (14)

75% Mohair, 25% Silk
from 3.80 £ /25g
DROPS Kid-Silk uni colour DROPS Kid-Silk uni colour 3.80 £ /25g
Wool Warehouse Direct Ltd
DROPS Kid-Silk long print DROPS Kid-Silk long print 3.80 £ /25g
Wool Warehouse Direct Ltd
DROPS Needles & Hooks
You can get the yarn to make this pattern from 19.00£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (worked in the round):
1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*.

GARTER ST (back and forth):
K all rows. 1 ridge = 2 rows K.

See diagram A.1. The diagram shows all rows in pattern seen from RS.

Worked in the round on circular needle/double pointed needles from bottom up. Cast on 136-144 sts on circular needle size 2.5 mm with 2 strands Kid-Silk. K 1 round, then work rib = K 2/P 2. When piece measures 4 cm, switch to circular needle size 3 mm, remove one strand, K 1 round while dec 22-24 sts evenly = 114-120 sts. Continue with 1 strand and A.1 over all sts. REMEMBER THE KNITTING TENSION! When piece measures 18-20 cm, K 1 round while dec 14-10 sts evenly = 100-110 sts. Insert 10 markers in the piece, 10-11 sts apart. then work in GARTER ST – see explanation above, AT THE SAME TIME dec 1 st before every marker on every other round, dec 8 times in total = 20-30 sts remain on round. Work all sts tog 2 by 2 = 10-15 sts. Pull yarn through the last sts and tighten tog. Fasten yarn tightly.

Worked back and forth on circular needle.
Cast on 92 sts on circular needle size 2.5 mm with 2 strands Kid-Silk. Work 1 ridge in GARTER ST - see explanation above, remove one strand, then work as follows - with 1 strand Kid-Silk: 3 sts in GARTER ST - see explanation above, * K 2, P 2 *, repeat from *-* and finish with K 2 and 3 sts in garter st. When rib measures 4 cm, P 1 row from WS while AT THE SAME TIME dec 14 sts evenly = 78 sts. Switch to circular needle size 3 mm. Then work as follows from RS: 3 sts in garter st, A.1 over the next 72 sts, 3 sts in garter st. REMEMBER THE KNITTING TENSION Continue like this until piece measures 150 cm, P 1 row from WS while inc 14 sts evenly = 92 sts. Switch to circular needle size 2.5 mm. Then work as follows from RS: 3 sts in garter st, * K 2, P 2 *, repeat from *-* and finish with K 2 and 3 sts in garter st. Work rib for 4 cm, then work 1 ridge with 2 strands. Cast off (with 2 strands).


= K from RS, P from WS
= 1 YO between 2 sts
= slip 1 st as if to K, K 2 tog, psso

Csajbók Márta 29.10.2018 - 19:08:

Kedves Drops csapat! Nagyon megtetszett ez a sapka-sál szett, gyönyörű színe van! Ez a selyem tartalmú mohair fonal pedig biztosan nagyon finom. Szívesen megkötném, de eddig még nem találtam pontosan ezt a színt itt Debrecenben.

DROPS Design 30.10.2018 kl. 03:47:

Kedves Márta! Köszönjük levelét. Ez a szín Magyarországon pillanatnyilag nem elérhető, de kísérje figyelemmel a Babaerka és a Kacskaringó fonaboltok választékát, a téli rendelések között bizonyára ez a szín is elérhető lesz. Az ITT található üzletek pedig ugyan külföldiek, de Magyarországra is szállítanak. Sikeres Kézimunkázást!

Christine 08.06.2018 - 16:53:

Pearl all? stitches in first row after ribbing or keep 3 at each edge in garter st?

DROPS Design 11.06.2018 kl. 08:02:

Dear Christine, you work the WS row purling all sts but with the 3 sts in garter st at the beg and at the end of row. Happy knitting!

Roberta Ferrari 24.01.2018 - 15:47:

Che vuol dire distribuire le diminuzioni in modo uniforme? Le diminuzioni devono essere invisibili oppure no? grazie

DROPS Design 24.01.2018 kl. 17:07:

Buonasera Roberta. Significa che tra una diminuzione e l'altra ci deve essere sempre lo stesso numero di maglie. Per calcolare ogni quante maglie diminuire, divide il numero delle maglie p.es per il cappello, nella taglia più piccola 136, per il numero di diminuzioni da fare, in questo caso 22 = 6,2. Diminuisce ogni 6 maglie circa. Diminuisce lavorando 2 maglie insieme. Buon lavoro!

Larissa 15.01.2018 - 12:17:

Liebes Drops-Team, wäre es möglich, dass Ihr zu den Konfektionsgrößen der Mütze bitte noch den jeweiligen Kopfumfang angebt? Vielen Dank :-)

Susan 03.07.2017 - 20:17:

Thank you for the quick reply. The pattern tells me to cast on 136-144 sts with 2 strands of Kid silk and then revert to 1 strand for the main of the hat. If I follow your reply I should only use 1 strand for the whole hat? Also thank you for explaining the chart to me.

DROPS Design 04.07.2017 kl. 09:05:

Dear Susan, tension is worked with only 1 strand, but beg of hat is worked with 2 strands Kid-Silk as in the written pattern, when piece measures 4 cm work only with 1 strand Kid-Silk. Happy knitting!

Susan 03.07.2017 - 08:23:

I am knitting the hat and have two questions. Was I supposed to knit the tension square with one or two strands of yarn. I have never used a chart before. Please could you explain it to me in the old written form. Thank you

DROPS Design 03.07.2017 kl. 10:14:

Dear Susan, hat and scarf are both worked with only 1 strand of yarn, your tension should be 24 sts x 32 rows in stocking st = 10 x 10 cm. Each square/symbol represents 1 st/group of st, see diagram text. Start reading diagram from the bottom corner on the right side towards the left from RS and every round (= hat). Happy knitting!

Loredana 01.03.2017 - 11:39:

Buongiorno, la sciarpa va bloccata? Grazie Loredana

DROPS Design 01.03.2017 kl. 12:03:

Buongiorno Loredana. Non viene indicato di bloccare la sciarpa. Confronti le misure del suo capo finito con quelle indicate. Se molto diverse può bloccare leggermente il lavoro per portarlo alle misure indicate. Per il tipo di filato indicato e per il punto usato, il capo deve mantenere il suo aspetto vaporoso. Buon lavoro!

Margit 27.10.2016 - 18:22:

Liebes Drops-Team, ich würde das Set gerne mit "Flora" stricken. Würde das klappen?

DROPS Design 28.10.2016 kl. 09:14:

Liebe Margit, also Flora und Kid-Silk sind beige Garngruppe A, beachten Sie nur daß beide unterschiedlichen Zusammensetzung haben, so wird es unterschiedlich aussehen. Mehr können Sie hier lesen.

GRANDIDIER VALERIE 12.09.2016 - 16:43:

Bonjour, Combien de pelote de 25g faut-il pour tricoter le bonnet ? 2 ? Merci !

DROPS Design 13.09.2016 kl. 08:51:

Bonjour Mme Grandidier, il faut 25 g Kid-Silk dans les 2 tailles, soit 1 pelote en taille S/M et la même quantité en taille M/L. Bon tricot!

Christine 28.07.2016 - 14:56:

Merci de votre réponse mais, je ne vois pas le nombre de mailles à monter pour l'écharpe !? Cordialement Christine

DROPS Design 28.07.2016 kl. 15:35:

Les explications de l'écharpe sont désormais en ligne, juste sous celles du bonnet - merci! Bon tricot!

Post a comment to pattern DROPS 172-30

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.