DROPS design: Pattern no w-558
Yarn group C or A + A
Measurements: A square measures 11 x 11 cm, blanket measures approx. 88 x 121 cm.
DROPS PARIS from Garnstudio
350 g colour no 16, white
100 g colour no 21, light mint green
100 g colour no 35, vanilla
100 g colour no 20, light pink
100 g colour no 30, grey blue
100 g colour no 100, light wash
100 g colour no 02, light turquoise
100 g colour no 38, raspberry
100 g colour no 45, dusty orange

DROPS CROCHET HOOK SIZE 5 mm – or size needed to get 14 tr x 8.5 rows = 10 x 10 cm.


Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here


100% Cotton
from 0.95 £ /50g
DROPS Paris uni colour DROPS Paris uni colour 1.05 £ /50g
DROPS Paris recycled denim DROPS Paris recycled denim 0.95 £ /50g
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 21.85£. Read more.

Pattern instructions

SQUARE 1 = light mint green, colour no 21.
SQUARE 2 = vanilla, colour no 35.
SQUARE 3 = light pink, colour no 20.
SQUARE 4 = grey blue, colour no 30.
SQUARE 5 = light wash, colour no 100.
SQUARE 6 = light turquoise, colour no 02.
SQUARE 7 = raspberry, colour no 38.
SQUARE 8 = dusty orange, colour no 45.
Work 11 squares with every colour = 88 squares in total.

Beg every round with tr with 3 ch (replace first tr) and finish with 1 sl st in 3rd ch on round. Beg every round with dc with 1 ch (replace first dc) and finish with a sl st in first ch on round.

To get a nice transition between the colour changes, work last sl st on round with the new colour as follows: Insert hook in 3rd ch from beg of round, get the new yarn, make a YO with the new colour and pull it through st on hook.

See diagrams A.1-A.2. Diagram A.1 is repeated 4 times in total on round.

Blanket consists of 8 colours - READ SQUARES - and white.

Work 7 ch on hook size 5 mm with Paris and form a ring with 1 sl st in first ch.
ROUND 1: See diagram A.1. Work 3 ch - READ CROCHET INFO, * 3 tr in ch-ring, 4 ch *, repeat from *-* a total of 4 times = 12 tr. REMEMBER THE CROCHET TENSION!
ROUND 2: Work * 1 tr in each of the first 3 tr, 2 tr in ch-space, 4 ch, 2 tr in same ch-space *, repeat from *-* 4 times in total = 28 tr.
ROUND 3: Work * 1 tr in each of the first 5 tr, 2 tr in ch-space, 4 ch, 2 tr in same ch-space, 1 tr in each of the next 2 tr *, repeat from *-* 4 times in total = 44 tr.
ROUND 4: Switch to white - READ COLOUR CHANGE! Work * 1 dc in each of the first 7 tr, 2 dc in ch-space, 3 ch, 2 dc in same ch-space, 1 dc in each of the next 4 tr *, repeat from *-* 4 times in total = 60 dc. Fasten all strands.

Sew blanket tog with 8 squares in height and 11 squares in length. Sew one and one strip tog with white in outer loops of edge sts alongside, then sew tog all strips in width.

Work an edge around the blanket on hook size 5 mm with white as follows: 1 dc in every dc, 3 dc in every ch-space, in each corner work 2 dc in ch-space, 3 ch, 2 dc in same ch-space, finish with 1 sl st in first ch. Fasten off.


symbols = ch
symbols = dc in tr
symbols = dc in ch-space
symbols = sl st
symbols = tr in tr
symbols = tr in ch-space
signature-image signature

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 162-4) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (25)

country flag Alicia wrote:

Me gustaría ver el patrón la manta es bonita

02.06.2021 - 21:15

country flag Thérèse wrote:

From where can colour 45 be bought? If no longer available, which alternative colour would you recommend, please?

07.06.2020 - 14:42

DROPS Design answered:

Dear Thérèse, this color is not available anymore, please contact your DROPS store for any assistance choosing colors. Happy crocheting!

08.06.2020 kl. 08:54

country flag Randi Gadgaard wrote:

Jeg vil gerne hækle tæppet i en lettere garn end bomuld. Gerne en blandingsgarn med uld, som ikke kradser. Hvilken kan I anbefale.

11.04.2020 - 20:02

DROPS Design answered:

Hei Randi. Du kan f.eks bruke DROPS Big Merino som er i samme garngruppe som Paris (C), eller du kan bruke 2 tråder fra garngruppe A. Bruk vår garnkalkulator og/eller se oversikten over våre kvaliteter. God Fornøyelse!

17.04.2020 kl. 15:05

country flag Isobel wrote:

Why do the recycled denim colours use much more yarn than the uni colours?

18.08.2019 - 13:31

country flag Joan wrote:

Jeg er meget ny i denne hækleverden, jeg er lige blevet næsten færdig med tæppet Too much fun, og skal til at hækle kanten rundt, men jeg forstår simpelhen ikke hvordan jeg gør. 1 fm i hver fm, 3 fm om hver lm bue, i hvert hjørne hækles 2 fm om lm buen, 3 lm, 2 2 fm om samme lm bue. Er der mod en video hvor jeg kan se hvordan det forståes?

04.08.2019 - 04:44

DROPS Design answered:

Hej Joan, jo men 4.omgang i videoen viser hvordan du hækler 1 fm i hver fm og den viser hjørnerne :)

How to crochet an easy square in trebles from Garnstudio Drops design on Vimeo.

16.08.2019 kl. 11:46

country flag Corrie Van Pelt wrote:

Kan ik hier een compleet pakket van bestellen?

05.07.2019 - 11:19

DROPS Design answered:

Dag Corrie,

Op de site kun je verkooppunten vinden die onze garens verkopen. Je kunt aan je verkooppunt vragen of er pakketten te koop zijn van je favoriete patronen.

08.07.2019 kl. 10:56

country flag Gerda Lindeman wrote:

Hoeveel heb ik van alles nodig voor deze deken en waar staat het patroon van de verschillende vierkantjes

27.07.2018 - 16:06

DROPS Design answered:

Dag Gerda, Bovenaan het patroon staat hoeveel gram je per kleur nodig hebt (1 bol = 50 gram). De vierkantjes worden gehaakt volgens telpatroon A.1, deze staat onderaan het patroon getekend en daarnaast zijn alle toeren het vierkant ook uitgeschreven bij 'VIERKANT'.

29.07.2018 kl. 10:35

country flag HENGELMANN Hengie wrote:

Pour une finition plus jolie et à mon goût, j'ai fait un rang de mailles serrées en plus autour du plaid et j'ai fini par un rang de coquilles simples .

08.06.2018 - 16:41

country flag Camilla Ramsby wrote:

Hejsa. Jeg er gået i gang med at hækle tæppet, men jeg mangler den farve der hedder: nr.45, lys orange. Jeg kan heller ikke finde den herinde på jeres website :-) Håber i kan hjælpe

15.04.2018 - 14:29

country flag Françoise wrote:

Bonjour, j'ai fait tout les carrés mais je n'arrive pas à faire un assemblage qui soit joli. Pouvez vous m'expliquer comment faire? Sinon c'est un très joli modèle Merci

01.11.2015 - 17:18

DROPS Design answered:

Bonjour Françoise, la vidéo ci-dessous montre comment assembler les carrés entre eux - faites la couture en blanc et assemblez d'abord les motifs en longueur (= hauteur), puis assemblez les bandes obtenues entre elles (suivez bien le schéma des couleurs). Bon assemblage!

02.11.2015 kl. 09:20

Post a comment to pattern DROPS 162-4

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.