Summer Circle |
|
|
|
Crochet DROPS jacket worked in a circle in 2 threads ”BabyAlpaca Silk”. Size: S - XXXL.
DROPS 136-1 |
|
STRIPES: BODY: Beg with 2 threads light sea green. Then work 3-3-4 rounds with each of the following colours: Stripe 1: 2 threads light sea green, Stripe 2: 1 thread light sea green and 1 thread pistachio Stripe 3: 2 threads pistachio Stripe 4: 1 thread pistachio and 1 thread light grey purple Stripe 5: 2 threads light grey purple, Stripe 6: 1 thread light old pink and 1 thread light grey purple Stripe 7: 2 threads light old pink, Stripe 8: 1 thread light old pink and 1 thread grey purple Stripe 9 until finished measurements: 2 threads grey purple SLEEVE: Worked in stripes. Work sleeve cap as 5th-5th-4th stripe, then work 12 cm as stripe 4-4-3, 12 cm as stripe 3-3-2, 12 cm as stripe 2-2-1, and work as stripe 1 until finished measurements. CROCHET TIP: Replace first dtr on every round/row with 4 ch. DECREASE TIP 1 (applies to the body): Dec as follows: Work dtr until 3 dtr remain, * in the first of these work 1 tr, in the next 1 htr and in the last 1 dc, turn with 1 ch, skip dc, work 1 sl st in htr and 1 sl st in tr, then 1 dc in first dtr, 1 htr in next dtr and 1 tr in next dtr, work dtr until 3 dtr remain at end of row *, repeat from *-* until a total of 6-8-12 rows have been worked. DECREASE TIP 2 (applies to sleeve): Dec at beg of row by working sl st over the no of dtr to be dec. Dec at end of row by working until same no of dtr to be dec remains, turn piece. -------------------------------------------------------- BODY: Worked in the round in a circle from mid back with 2 threads BabyAlpaca Silk and STRIPES – see explanation above. Crochet 8 ch on hook size 5 mm and form a ring with 1 sl st in first ch. ROUND 1: Work 12 dc in ch-ring, finish with 1 sl st in first dc. ROUND 2: 5 ch (= 1 tr + 2 ch), * 1 tr in next dc, 2 ch *, repeat from *-* the entire round and finish with 1 sl st in 3rd ch from beg of round = 12 tr with 2 ch between each. ROUND 3: READ CROCHET TIP! 1 dtr, 2 dtr in same tr, * 1 dtr in ch-loop, 3 dtr in next tr *, finish with 1 dtr in the last ch-loop and 1 sl st in 4th ch from beg of round = 48 dtr. ROUND 4: 1 dtr, * 2 dtr in next dtr, 1 dtr in next dtr *, repeat from *-* and finish with 2 dtr in next dtr and 1 sl st in 4th ch from beg of round = 72 dtr. ROUND 5: 1 dtr, * 2 dtr in next dtr, 1 dtr in each of the next 2 dtr * repeat from *-* and finish with 2 dtr in next dtr, 1 dtr in next dtr and 1 sl st in 4th ch = 96 dtr. ROUND 6: 5 ch (= 1 tr + 2 ch), * skip 1 dtr, 1 tr in next dtr, 2 ch *, repeat from *-* the entire round and finish with 1 sl st in 3rd ch from beg of round = 48 ch-loops. ROUND 7: Work 1 dtr in every tr and work 1 and 2 dtr alternately in every ch-loop the entire round = 120 dtr. ROUND 8: Work 1 dtr in every dtr but work 2 dtr in every 10th dtr = 132 dtr. ROUND 9: 5 ch (= 1 tr + 2 ch), * skip 1 dtr, 1 tr in next dtr, 2 ch *, repeat from *-* the entire round and finish with 1 sl st in 3rd ch from beg of round = 66 ch-loops. ROUND 10: Work 1 dtr in every tr and work 1 and 2 dtr alternately in every ch-loop the entire round = 165 dtr. ROUND 11: Work 1 dtr in every dtr but work 2 dtr in every 15th dtr = 176 dtr. ROUND 12: Work 1 dtr in every dtr but work 2 dtr in every 16th dtr = 187 dtr. Piece measures approx. 20 cm from centre and outwards. SIZE S/M: ROUND 13: 1 ch, then work 1 dc in each of the first 45 dtr (= up towards neck), work 30 loose ch, skip the next 27 dtr (= armhole), then work 1 dc in each of the next 88 dtr (= down towards back), work 30 loose ch, skip the next 27 dtr (= armhole) and fasten with 1 sl st in first dc on round. ROUND 14: Work 1 dtr in every dc - but inc 2 dtr evenly over the first 45 dc (= 47 dtr), then work 30 dtr in ch-row over armhole, work 1 dtr in every dc – but inc 3 dtr evenly over the bottom 88 dc (= 91 dtr), work 30 dtr in ch-row over armhole and fasten with 1 sl st in 4th ch = 198 dtr. ROUND 15 to 19: Continue with dtr – while at the same time inc 6 dtr evenly on every round. After 19th round there are 228 dtr on the round and piece measures approx. 33 cm from centre and outwards. Continue working only over 79 dtr in each side – i.e. do not work over 35 dtr at top by neck and 35 dtr at bottom of back. Cut the thread. Continue with explanation below front piece. SIZE L/XL: ROUND 13: Work 1 dtr in every dtr but work 2 dtr in every 17th dtr = 198 dtr. ROUND 14: 1 ch, then work 1 dc in each of the first 50 dtr (= up towards neck), work 32 loose ch, skip the next 29 dtr (= armhole), then work 1 dc in each of the next 90 dtr (= down towards back), work 32 loose ch, skip the next 29 dtr (= armhole) and fasten with 1 sl st in first dc on round. ROUND 15: Work 1 dtr in every dc - but inc 3 dtr evenly over the first 50 dc (= 53 dtr), then work 32 dtr in ch-row over armhole, work 1 dtr in every dc – but inc 3 dtr evenly over the bottom 90 dc (= 93 dtr), work 32 dtr in ch-row over armhole and fasten with 1 sl st in 4th ch = 210 dtr. ROUND 16 to 20: Continue with dtr – while at the same time inc 6 dtr evenly on every round. After 20th round there are 240 dtr on the round and piece measures approx. 35 cm from centre and outwards. Continue working only over 81 dtr in each side – i.e. do not work over 39 dtr at top by neck and 39 dtr at bottom of back. Cut the thread. Continue with explanation below front piece. SIZE XXL/XXXL: ROUND 13: Work 1 dtr in every dtr but work 2 dtr in every 17th dtr = 198 dtr. ROUND 14: Work 1 dtr in every dtr but work 2 dtr in every 18th dtr = 209 dtr. ROUND 15: 1 ch, then work 1 dc in each of the first 54 dtr (= up towards neck), work 36 loose ch, skip the next 32 dtr (= armhole), then work 1 dc in each of the next 91 dtr (= down towards back), work 36 loose ch, skip the next 32 dtr (= armhole) and fasten with 1 sl st in first dc on round. ROUND 16: Work 1 dtr in every dc - but inc 2 dtr evenly over the first 54 dc (= 56 dtr), then work 36 dtr in ch-row over armhole, work 1 dtr in every dc – but inc 3 dtr evenly over the bottom 91 dc (= 94 dtr), and work 36 dtr in ch-row over armhole = 222 dtr. ROUND 17 to 22: Continue with dtr – while at the same time inc 6 dtr evenly on every round. After 22nd round there are 258 dtr on the round and piece measures approx. 37 cm from centre and outwards. Continue working only over 89 dtr in each side – i.e. do not work over 40 dtr at top by neck and 40 dtr at bottom of back. Continue with explanation below front piece. LEFT FRONT PIECE - ALL SIZES: = 79-81-89 dtr. Insert a marker after 23-24-27 sts in from each side (= 33-33-35 sts between markers). Then work dtr back and forth over these sts while at the same time inc 1 st at every marker on every row (i.e. inc 2 sts on row, inc alternately before and after marker) and dec 3 sts at end and beg of every row in each side – SEE DECREASE TIP 1 until a total of 6-8-12 rows back and forth have been worked = 55-49-41 dtr. RIGHT FRONT PIECE: Work same way as on left piece over 79-81-89 dtr in right side. SLEEVE: Worked back and forth from sleeve cap and down with 2 threads BabyAlpaca Silk and STRIPES – see explanation above. Work 28-34-38 ch with stripe 5-5-4. Turn and work 1 dtr in 5th ch from hook ( = 2 dtr), then work 1 dtr in every ch = 25-31-35 dtr. ROW 2: Work 4 ch, 3 dtr in first dtr, 1 dtr in each of the next 23-29-33 dtr, 4 dtr in the last dtr = 31-37-41 dtr. Turn. ROW 3, 4 and 5: Work 4 ch, 2 dtr in first dtr, 1 dtr in every dtr until 1 dtr remains, 3 dtr in the last dtr = 43-49-53 dtr. Turn. ROW 6: Work 4 ch, 3 dtr in first dtr, 1 dtr in each of the next 41-47-51 dtr, 4 dtr in the last dtr = 49-55-59 dtr. Turn. Switch to stripe 4-4-3 here. Then work dtr on all rows until piece measures 17-15-15 cm. Continue with dtr while AT THE SAME TIME dec as follows in each side: SIZE S/M: * Work 1 row where dec 1 dtr in each side - see Decrease tip. Work 1 row without dec. Work 1 row where dec 1 dtr in each side. Work 2 rows without dec *, repeat from *-* a total of 3 times = 12 dec = 37 dtr. SIZE L/XL + XXL/XXXL: * Work 1 row where dec 1 dtr in each side - see Decrease tip. Work 1 row without dec *, repeat from *-* a total of 8 times = 16 dec = 39-43 dtr. Continue to work as follows: ROW 1: 1 dtr in every dtr. ROW 2: 6 ch (= 1 dtr + 2 ch), skip 1 dtr, 1 dtr in next dtr, * 2 ch, skip 1 dtr, 1 dtr in next dtr *, repeat from *-* the entire row = 18-19-21 ch-loops. ROW 3: Work 1 dtr in every dtr and 1 dtr in every ch-loop = 37-39-43 dtr. Repeat rows 1 to 3 a total of 3 times, sleeve measures approx. 61-61-61 cm. Cut and fasten the thread. ASSEMBLY: Sew sleeve seams tog edge to edge to avoid a chunky seam. Work 1 round around the entire body and at bottom of sleeves as follows with 2 threads grey purple: 1 sl st, * 5 ch, 1 tr in first ch, skip 1 st, fasten with 1 dc in next st *, repeat from *-* the entire round and finish with 1 sl st in first ch. Sew in the sleeves. |
|
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Comments / Questions (191)
Zia wrote:
Bonjour, je rencontre un pb pour les manches, je ne comprends pas comment la maille chainette de départ de la manche peut être de 28m alors que les instructions font sauter 27 DB au tour 13 pour l'emmanchure... je n'ai qu'un coté de la manche si je travaille sur 28mch au départ de la manche?? Je suis perdue!!
05.01.2019 - 10:37DROPS Design answered:
Bonjour Zia, les manches se crochètent de haut en bas, en commençant par l'arrondi de la manche, les 25 DB du début de la manche (sur 28 ml) vont être augmentées d'abord à 49 brides pour la largeur de l'emmanchure puis on diminuera pour le poignet. Bon crochet!
07.01.2019 - 09:44Gilda Le Pera wrote:
Il problema è che non ho ben capito il discorso delle diminuzioni; devono essere fatte all'inizio e alla fine di ogni riga, ma le spiegazioni ( diminuzioni 1) mi risultano poco chiare; soprattutto nella prima riga, che è proprio dove dovrei diminuire all'inizio
14.08.2018 - 11:28DROPS Design answered:
Buonasera Gilda, può iniziare la riga come descritto nel suggerimento: "girare il lavoro con 1 cat, saltare 1 m.b, lavorare 1 m.bss nella m.m.a e 1 m.bss nella m.a, poi 1 m.b nella 1° m.a.d, 1 m.m.a nella m.a.d seguente e 1 m.a nella m.a.d seguente, lavorare m.a.d finché non rimangano 3 m.a.d alla fine della riga" Buon lavoro!
14.08.2018 - 19:34Gilda wrote:
Salve, ho difficoltà a capire le istruzioni per quanto riguarda le diminuzioni, sui due lati davanti. Dove si aumenta e diminuisce allo stesso tempo
13.08.2018 - 23:48DROPS Design answered:
Buongiorno Gilda, se ci spiega meglio le sue difficoltà possiamo aiutarla meglio. In ogni caso sul davanti sinistro aumentare 1 maglia alta in corrispondenza di ogni segnapunti su ogni riga (2 aumenti per riga), in modo alternato prima e dopo il segnapunti (quindi su una riga aumenta prima e su quella successiva aumenta dopo) e contemporaneamente diminuire 3 m all' inizio e alla fine di ogni riga ad ogni lato – seguendo il suggerimento per le DIMINUZIONI-1 fino a quando sono state lavorate le righe indicate. Buon lavoro!
14.08.2018 - 10:38Barbara wrote:
Volendo fare il modello piu' grande (circonferenza petto 107cm) come modifico le istruzioni? Grazie
07.07.2018 - 23:42DROPS Design answered:
Buongiorno Barbara. Abbiamo corretto le misure del giropetto. Può ora verificare la misura corretta da seguire. Buon lavoro!
08.07.2018 - 08:02Sophie Kling wrote:
Hej Jag vill anmäla ett fel mönstret. Det behövs 150g av både grålila och gammalrosa garnet i storlek S Jag blev riktigt besviken att ni skrivit fel då det blev fel i min beställning.
18.02.2018 - 14:27Rosaria Napolitano wrote:
Buongiorno, sto facendo questo modello ma mi sono bloccata. sono ferma al 19° giro, cosa intendete per lavorare solo sopra 79 mad ad ogni lato (devo quindi lavorare anche sulle maniche?non riesco a capire come si fa il davanti. Dalle spiegazioni che date sembrerebbe da lavorare a parte, non riesco a capire. Potete spiegarmi meglio Grazie
01.02.2018 - 15:17DROPS Design answered:
Buongiorno Rosaria. Lo spazio per le maniche è stato creato al giro 13 (Taglia s/m), quando ha avviato le 30 cat e saltato le 27 m dello scalfo. Le maglie che lavora nelle cat dello scalfo sono maglie dei davanti. Al giro 19 deve proseguire solo sulle maglie dei davanti, non lavorando più sulla parte del lavoro dello scollo e quella in basso. Le maniche le lavora a parte e le cuce intorno all'apertura degli scalfi. Buon lavoro!
01.02.2018 - 15:52Rachele wrote:
Non capisco bene dalle spiegazioni come effettuare il davanti. Aumenti e diminuzioni?
27.01.2018 - 11:38DROPS Design answered:
Buonasera Rachele, il davanti viene modellato con aumenti e diminuzioni come spiegato nelle istruzioni. Se c'è un punto non chiaro, ci scriva pure. Buon lavoro!
27.01.2018 - 20:04Christina wrote:
I know the front left side has been addressed, but I am still so confused: I understand up to inc at each marker... Am I to increase on both sides of the marker? Also I don't under inc and dec at the same time. If I'm inc at each marker at every row, how am I dec at the beginning and end of each row? Isn't that the same thing? I'm so confused.
09.11.2017 - 00:35DROPS Design answered:
Dear Christina, you will dec 1 st at each marker, ie on first row inc 1 st before both markers (= 2 sts inc), on next row inc 1 st after both markers (= 2 sts inc) and continue that way. At the same time, decrease at the end of first row + at the beg of next row as explained under DECREASE-TIP-1, and continue dec at the end and beg of row as explained. Happy crocheting!
09.11.2017 - 09:16Roman wrote:
Hi, " in the first of these work 1 tr, in the next 1 htr and in the last 1 dc, turn with 1 ch, skip dc, work 1 sl st in htr and 1 sl st in tr, then 1 dc in first dtr, 1 htr in next dtr and 1 tr in next dtr, work dtr until 3 dtr remain at end of row" ; this is done at the beg. and end of rows in one step?! because it says "turn with". Regards, Roman
18.09.2017 - 07:28DROPS Design answered:
Dear Roman, work end of row as explained until "turn with", then turn piece and work beg of row as explained. Happy crocheting!
18.09.2017 - 09:29Roman wrote:
Hi, working the Left front is soooo confusing, parallel with dec tip 1?!!! Need more clarifications.
15.09.2017 - 16:28DROPS Design answered:
Dear Roman, after you put after the first and before the last 23-24-27 stitch, you should increase before and after this marker, and decrease at the beginning and at the end of the row, according the pattern. the two froms should be symetrical. I hope this helps. Happy Crocheting!
18.09.2017 - 00:49