Noi saremmo felici di ricevere i tuoi commenti e opinioni su questo modello!
Se vuoi fare una domanda, fai per favore attenzione a selezionare la categoria corretta nella casella qui sotto per velocizzare il processo di risposta. I campi richiesti sono indicati da *.
Milena wrote:
Hallo liebes Drops Design Team, ich habe mit dem Vorderteil angefangen und bis zu dem Teil gestrickt, an dem die Halsmaschen stillgelegt werden müssen. Stricke ich bis zum „mittleren Teil“ ganz normal weiter, lege dann die mittleren Maschen still und drehe mich anschließend wieder rum, sodass ich die eine Seite erstmal fertig stricke, bis ich - wie beim Kapitel „Schräge Schulter“ angegeben - 50 cm erreicht habe? Wie gehe ich dann weiter?
20.02.2024 - 13:19DROPS Design answered:
Liebe Milena, wenn die mittleren Maschen für den Hals stillgelegt werden, strickt man beide Schulter separat, am Anfang jeder Reihe von Armausschnitt werden die Maschen für den Schulter wie zuvor stillgelegt bis alle Maschen stillgelegt sind und am Anfang jeder Reihe von Hals werden Maschen (jeweils 1 Masche 4 Mal) abgekettet. Wenn alle Maschen stillgelegt/abgekettet sind, stricken Sie 1 Reihe über alle Maschen dann ketten Sie alle Maschen ab. Viel Spaß beim stricken!
20.02.2024 - 15:46Valérie wrote:
Pouvez vous expliquer pas à pas l'étape des diminutions d'épaules et du cou? Le biais des épaules, l'encolure pour le dos et le devant sont incompréhensibles. Même les explications en espagnol et en anglais ne me suffisent pas. Il doit y avoir une erreur de traduction. Y aurait-il une vidéo qui illustre cette étape? D'avance merci. Bien cordialement, FB
13.02.2024 - 20:08DROPS Design answered:
Bonjour Valérie, pour former le biais des épaules vous allez tricoter des rangs raccourcis, autrement dit, en commençant par l'emmanchure, tricotez les 7 à 11 premières mailles et mettez-les en attente, terminez le rang, tournez et tricotez le rang (encolure vers emmanchure), répétez ces 2 rangs encore 1 fois, et tricotez 1 rang sur les 6-10 dernières mailles tournez et tricotez toutes les mailles au rang retour. Répétez pour l'autre épaule de la même façon. Cette vidéo montre comment faire (pour un autre modèle, suivez-bien le nombre de mailles de celui-ci. Bon tricot!
14.02.2024 - 08:05Meta wrote:
Förstår inte riktigt... "Första varvet stickas så här från rätsidan: 2 maskor i RÄTSTICKNING, resår (2 rätmaskor, 2 avigmaskor)" - Ska det stickas 2 räta och sedan resår med 2 r, 2 a? Då blir det totalt 4 r och 2 a i början av varvet! "tills det återstår 4 maskor, 2 rätmaskor och 2 maskor i rätstickning" - Totalt 4 räta alltså? Vad gör jag med de återstående maskorna nämnt i meningen? Ska de bara vara där sticket ut eller ska de stickas på ngt sätt?
09.01.2024 - 11:38DROPS Design answered:
Hej Meta, de 2 första rätstickas (räta på varje varv) och de 2 rätmaskorna blir till slätstickade maskor :)
09.01.2024 - 14:52Marianne wrote:
Drops 231-59. Jeg forstår ikke forklaringen der er givet på skra skulder. Der står ikke noget om at strikke tilbage eller andet, bare sætte masker på tråd. Det er som om der mangler en uddybende forklaring på skrå skulder.
07.12.2023 - 15:18DROPS Design answered:
Hej Marianne, her ser du hvordan man gør Hvordan tages der ind til skrå skulder Det her er den første, så er det bare at klikke på nr 2 og 3 nederst i videoen :)
07.12.2023 - 15:35Mette wrote:
I mönstret för sned axel ska jag lägga maskor på tråd "2 gånger"? Det står inget om vilka maskor sin ska maskas av eller när, men "alla maskor har nu maskats av eller satts på tråd"? Jag förstår inte heller den fortsatta anvisningen att det blir ett hål där man vänder? Snälla svara på svenska, för google translate förstod inte att lversätta korrekta termer från varken danska eller engelska.
18.11.2023 - 12:00DROPS Design answered:
Hej Mette, jo du har maskat av halsmaskorna. (minsta storleken) Sticka de 7 yttersta maskor innan du sätter dem på en tråd, sticka varvet ud. Vänd sticka tillbaka. Sticka 7 maskor och sätt på tråden, sticka varvet ut. Vänd sticka tillbaka. Sticka de sista 6 maskor och sätt på tråden. Sätt tillbaka alla 20 maskor från tråden på stickan och följ mönstret.
24.11.2023 - 12:15Suzanne Scott wrote:
I can't understand where the measurements are. I've looked at the link to using sizes but it says they are listed on the diagram - indeed the diagram they show makes sense as it clearly indicates on that picture the chest measurements but none of the ones ive looked at are actually set out in that manner - how do i work out what the chest sizes are on these patterns?
06.11.2023 - 20:34DROPS Design answered:
Hi Suzanne, You will find the measurements chart at the bottom of the pattern, with all the measurements for each size. Happy knitting!
07.11.2023 - 06:52Harriet Gill wrote:
Hi I would like to make this with the Alpaca Brushed Silk yarn and I just want to check the Yarn converter instruction to replace 200g of 1 strand of Melody with 200g of 2 strands of ABS. Do I have to buy 200g x 2 or just 200g x 1 of ABS? Many thanks for your help Harriet Gill
18.10.2023 - 07:07DROPS Design answered:
Dear Mrs Gill, to replace 200 g DROPS Melody , you will need 200 g DROPS Brushed Alpaca Silk but work with 2 strands instead of just 1 Melody. Read more here. Happy knitting!
18.10.2023 - 08:32Sharon Hunt wrote:
Hi I do not understand the instructions below. The diagonal shoulders are new to me. I need some help on how to proceed before I get there. Thanks Place the outermost stitches towards armhole on a thread for the diagonal shoulders, but to avoid cutting the strand work them first. Place 7-7-8-9-9-11 stitches on a thread two times, then the last 6-7-7-8-10-10 stitches. All stitches have now been bind off or placed on the thread.
18.08.2023 - 11:51DROPS Design answered:
Dear Mrs Hunt, starting from armhole, work the first 6-10 sts (see size) and slip them on a thread, work to the end of the row (towards neck), turn and work return row, repeat these 2 rows one more time, then work the remaining stitches, turn and work return row, turn and work all stitches back and cast off on next row. Happy knitting!
18.08.2023 - 16:10Claire Perrier wrote:
Good evening Please could you explain the cast off 1 stitch 4 times on the neck. I'm a little confused ... does this just mean cast off 4 stitches ? Many thanks Claire
31.07.2023 - 23:23DROPS Design answered:
Dear Claire, cast off 1 stitch at the beginning of each row starting from the neck towards shoulder a total of 4 times, this means on right shoulder you will cast off at the beg of a row from RS and on left shoulder you will cast off at the beg of a row from WS (4 times in total) Happy knitting!
01.08.2023 - 09:22
Cherry Sorbet Vest |
|
|
|
Gilet lavorato ai ferri in DROPS Melody. Lavorato dal basso verso l’alto, a maglia rasata, con il collo alto e spacchi laterali. Taglie: S – XXXL.
DROPS 231-59 |
|
------------------------------------------------------- TECNICHE IMPIEGATE: ------------------------------------------------------- COSTA/MAGLIA LEGACCIO (avanti e indietro): Lavorare tutti i ferri a diritto. 1 costa in altezza = 2 ferri diritto. ------------------------------------------------------- INIZIO DEL LAVORO: ------------------------------------------------------- GILET – BREVE RIASSUNTO DEL LAVORO: Lavorare il davanti e il dietro in modo separato, in piano e dal basso verso l’alto. Lavorare i bordi delle maniche e il collo alla fine. Il dietro è 6 cm più lungo del davanti. DIETRO: Avviare 82-86-94-102-110-118 maglie con i ferri circolari n° 4,5 mm e DROPS Melody. Lavorare come segue dal diritto del lavoro: 2 maglie a MAGLIA LEGACCIO – leggere la descrizione sopra, lavorare a coste (2 maglie diritto, 2 maglie rovescio) fino a quando rimangono 4 maglie, 2 maglie diritto e 2 maglie a maglia legaccio. Continuare queste coste per 8 cm, con il ferro successivo dal diritto del lavoro. Lavorare come segue: 1 maglia a maglia legaccio, 80-84-92-100-108-116 maglie diritto e diminuire 12-12-14-14-14-14 maglie in modo uniforme su queste maglie, 1 maglia di vivagno a maglia legaccio = 70-74-80-88-96-104 maglie. Passare ai ferri circolari n° 6 mm e lavorare a maglia rasata con 1 maglia a maglia legaccio a ogni lato. FARE ATTENZIONE ALLA TENSIONE DEL LAVORO! Quando il lavoro misura 33-34-35-36-37-38 cm, intrecciare 3-3-4-4-5-5 maglie all’inizio dei 2 ferri successivi per gli scalfi = 64-68-72-80-86-94 maglie. Continuare a maglia rasata. Quando il lavoro misura 56-58-60-62-64-66 cm, intrecciare le 24-26-26-28-30-30 maglie centrali per il collo e finire ogni spalla in modo separato. DIAGONALE DELLA SPALLA: Mettere in sospeso per la diagonale della spalla le maglie più esterne verso lo scalfo, ma per evitare di tagliare il filo, lavorarle prima. Mettere 7-7-8-9-9-11 maglie in sospeso 2 volte, poi le ultime 6-7-7-8-10-10 maglie. Ora tutte le maglie sono state intrecciate o messe in sospeso. Riportare le 20-21-23-26-28-32 maglie in sospeso sui ferri circolari n° 6 mm. Lavorare 1 ferro diritto dal rovescio del lavoro; per evitare dei buchi quando si gira il lavoro al centro del ferro, sollevare il filo tra 2 maglie e lavorarlo a rovescio ritorto con la 1° maglia sul ferro sinistro. Poi intrecciare a diritto senza stringere dal diritto del lavoro. Il lavoro misura circa 60-62-64-66-68-70 cm dal bordo di avvio al punto più alto della spalla. Lavorare l’altra spalla nello stesso modo. DIETRO: Avviare e lavorare nello stesso modo del dietro fino a quando il lavoro misura 27-28-29-30-31-32 cm. Ora intrecciare 3-3-4-4-5-5 maglie all’inizio dei 2 ferri successivi per gli scalfi = 64-68-72-80-86-94 maglie. Continuare a lavorare fino a quando il lavoro misura 48-50-52-53-55-57 cm. Mettere le 16-18-18-20-22-22 maglie centrali in sospeso per il collo e finire ogni spalla in modo separato. PANORAMICA DELLA SEZIONE SUCCESSIVA: Lavorare il collo e le diagonali della spalla come descritto sotto. Leggere COLLO e DIAGONALE DELLA SPALLA prima di continuare. COLLO: Intrecciare 1 maglia 4 volte. DIAGONALE DELLA SPALLA: ALLO STESSO TEMPO quando il lavoro misura 50-52-54-56-58-60 cm, mettere in sospeso per la diagonale della spalla le maglie più esterne verso lo scalfo nello stesso modo del dietro. Quando tutte le maglie sono state intrecciate o messe in sospeso, rimettere le 20-21-23-26-28-32 maglie in sospeso sui ferri circolari n° 6 mm. Lavorare 1 ferro rovescio dal rovescio del lavoro nello stesso modo del dietro. Intrecciare a diritto senza stringere dal diritto del lavoro. Il lavoro misura circa 54-56-58-60-62-64 cm dal bordo di avvio al punto più alto della spalla. Lavorare l’altra spalla nello stesso modo. CONFEZIONE: Cucire i margini delle spalle. Cucire i lati nel filo più esterno della maglia più esterna in modo che la cucitura sia piatta, lasciando 14 cm in basso (= spacco). BORDO DELLE MANICHE: Usando i ferri circolari n° 4,5 mm, iniziare sulla parte inferiore dello scalfo e riprendere dal diritto del lavoro (all’interno di 1 maglia) 64 - 80 maglie attorno allo scalfo (il n° delle maglie dev’essere divisibile per 4). Lavorare a coste in tondo (2 maglie diritto, 2 maglie rovescio) per 4 cm. Intrecciare con diritto su diritto e rovescio su rovescio. Lavorare un bordo simile attorno all’altro scalfo. COLLO: Usando i ferri circolari corti n° 4,5 mm, iniziare in cima a una delle spalle e dal diritto del lavoro riprendere (all’interno di 1 maglia) 60 - 68 maglie attorno al collo (comprese le maglie in sospeso e con il n° delle maglie divisibile per 4). Lavorare a coste in tondo (2 maglie diritto, 2 maglie rovescio) per 20-20-22-22-24-24 cm. Intrecciare con diritto su diritto e rovescio su rovescio. |
|
Avete realizzato questo o un altro dei nostri modelli? Taggate le vostre foto nei social media con #dropsdesign in modo che possiamo vederle! Avete bisogno di aiuto con questo modello?Troverete video tutorial, una sezione per i commenti/domande e molto altro guardando il modello su www.garnstudio.com © 1982-2024 DROPS Design A/S. Ci riserviamo tutti i diritti. Questo documento, compreso tutte le sue sotto-sezioni, è protetto dalle leggi sul copyright. Potete leggere quello che potete fare con i nostri modelli alla fine di ogni modello sul nostro sito. |
Helena Jansson wrote:
Hur lång skall resåren på framstycket vara? Det står att bakstycket skall vara 6 cm längre med också att framstycket skall stickas som bakstycket. Bilden viar att bak är längre och att framstycke resår är längre än 2 cm eller hur?
25.12.2023 - 21:33