DROPS Children 49 · Lots of new kid designs!

Italian cast on – knit 2 / purl 2 ribbing

In this DROPS video we show one way of Italian cast on, with knit 2, purl 2 ribbing. Start with a long thread end, the length depends on how many stitches are to be cast on. Hold the thread over the thumb and left index finger, insert the needle on the inside and from the back so that there is a cross = 1st stitch (= K). Take the needle over the back thread, up in the middle, under the front thread and up = 2nd stitch (P). Next stitch: Insert needle under first thread and up in the middle, over back thread and up (2nd K stitch). Continue like this with P and K to desired number of stitches, but should be able to divisible by 4 (+ 2 if required). Turn the piece and twist the threads twice. Work K over K and P over P, turn. Now start working the rib into K2, P2 as follows: * knit 1, slip the next 2 stitches to the right needle as to knit them together, then put them back on the left needle slipping the purl stitch first then the knit stitch (so that they are now “reversed), knit the next stitch, and purl the next 2 stitches *, and repeat from *-* to the end of the row. The method gives a very elastic result. We use the yarn DROPS Snow in the video.

Patterns using this technique

DROPS 231-60

DROPS 231-60
DROPS 231-59

DROPS 231-59
DROPS 225-29

DROPS 225-29
Change language:

Video #1673, listed in: Learn to knit, Cast on, Italian cast on

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Else Madsen wrote:

Hej jeg skal strikke 3 r og 2 vr / hvor slår jeg dette op med italiensk opslåning?

06.12.2024 - 06:25

DROPS Design :

Hei Else. Det har vi ingen video på , og jeg er usikker på om det går om du ser og leser på teknikkene på de Italienske oppleggsvideo vi har. mvh DROPS Design

09.12.2024 - 08:12

Country flag Marie Serruys wrote:

Ik vraag me af hoe je de eerste rij moet breien met een rondbreinaald want hier kan je het werk niet keren ?

16.01.2022 - 20:15

DROPS Design :

Dag Marie,

Bij rondbreien kan je op dezelfde manier opzetten en dan gewoon zonder te keren verder breien in de rondte.

03.02.2022 - 11:43

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for Italian cast on with a stable edge - rib with 1 knit / 1 purl
5:14
Italian cast on with a stable edge - rib with 1 knit / 1 purl

In this DROPS video we show one way of Italian cast on with a stable edge, with 1 knit and 1 purl stitch. Start with a long thread end, the length depends on how many stitches are to be cast on. Hold the thread over the thumb and left index finger, insert the needle on the inside and from the back so that there is a cross = 1st stitch (K). Take the needle over the back thread, up in the middle, under the front thread and up = 2nd stitch (P). Next stitch: Insert needle under first thread and up in the middle, over back thread and up (K). Continue like this with P and K to desired number of stitches, finish with a P stitch. Turn the piece and twist the threads twice. Start 2nd row with K1, place the yarn in front of the needle and slip the P stitch over to the right needle as if to purl, K the next stitch. Place the yarn in front of the needle and slip the P stitch over to the right needle as if to purl, K the next stitch, continue like this the entire row, but P the last stitch, turn. K 1, place the yarn in front of the needle and slip the P stitch over to the right needle as if to purl, K the next stitch. Place the yarn in front of the needle and slip the P stitch over to the right needle as if to purl, K the next stitch, continue like this the entire row, but P the last stitch, turn. Continue with K over K and P over P. This method gives an elastic and nice result and a stable edge. We use the yarn DROPS Snow in the video.
Video thumbnail for Italian cast on - rib with 1 knit / 1 purl
3:36
Italian cast on - rib with 1 knit / 1 purl

In this DROPS video we show one way of Italian cast on, with 1 knit and 1 purl stitch. Start with a long thread end, the length depends on how many stitches are to be cast on. Hold the thread over the thumb and left index finger, insert the needle on the inside and from the back so that there is a cross = 1st stitch (= K). Take the needle over the back thread, up in the middle, under the front thread and up = 2nd stitch (P). Next stitch: Insert needle under first thread and up in the middle, over back thread and up (2nd K stitch). Continue like this with P and K to desired number of stitches. Finish the last stitch with a loop so that you "lock" the stitches. Turn, and work K over K and P over P. The method gives a very elastic result. We use the yarn DROPS Snow in the video.
Video thumbnail for How to work with 2 circular needles with different needle sizes
9:10
How to work with 2 circular needles with different needle sizes

In this DROPS video we show you how to work rib in a stockinette stitch piece. To allow the rib to tighten, work the rib with a smaller needle size than the rest of the piece. Use both ends of the needle when working.
Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for European yoke-Short overview. The neck is finished after the stitches for the sleeves are picked up
4:54
European yoke-Short overview. The neck is finished after the stitches for the sleeves are picked up

In this DROPS video we show a brief overview of how to knit a garment with an European yoke, where the neck is finished after the stitches for the sleeves are picked up. The garment is worked as follows, according to these 5 steps: 1) BACK PIECE: Cast on stitches for the back of the neckline and work the back piece top down, at the same time as increasing each side until you have reached the correct shoulder-width. The back piece has slightly diagonal shoulders. 2) FRONT PIECE: The front piece is worked in 2 pieces (each side of the neck). Start by knitting up stitches along one shoulder on the back piece. Work the front piece top down, at the same time as increasing for the neckline. Repeat for the second front piece along the other back shoulder. 3) YOKE: On the next row, place all stitches on the same circular needle as follows: Work across one front piece, pick up stitches for the sleeve along the side of the front piece, work across the back piece, pick up stitches for the sleeve along the side of the second front piece, work across the second front piece. The yoke is continued back and forth across all stitches, with the rows starting and ending mid-front. 4) INCREASE FOR NECK, BODY AND SLEEVES: While working the yoke, begin by increasing only for the neckline and sleeves, then subsequently for both the body and sleeves. Once the final increase for the neckline is done, the 2 front pieces are joined mid-front and the piece is continued in the round. 5) BODY AND SLEEVES: When all the increases are finished and the yoke has been worked to the correct length, it is divided for the body and sleeves. The body is continued in the round with a circular needle, top down, while the sleeves wait.