DROPS Children 49 · Lots of new kid designs!

How to work neck edge in 2 pieces

In this DROPS video we show how a neck edge is worked, that is used in the Valencia Cardigan in DROPS 202-10.

We work the smallest size/stitch amount in DROPS 202-10 and we have already cast on 5 stitches and worked garter stitch approx. 6 cm. We start the video showing SHORT ROWS 1 to first neck edge, then it is worked garter stitch to the piece measurement approx. 14 cm. Cut the yarn and put neck edge aside. Then we show SHORT ROWS 2 to second neck edge (start from wrong side) and finish with 1 row knit from wrong side. Knit approx. 6 cm garter stitch, put the stitches over to the circular needle, cast on 52 new stitches and knit over the 5 stitches from the other neck edge.

When the jacket is finish sew neck edge together mid back so that seam is facing inwards. Pull the neck edge light and sew neck edge to neck line in the back of neck.

RS = right side
WR = wrong side

We use the yarn DROPS Air in the video.

You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

Patterns using this technique

DROPS 205-14

DROPS 205-14
DROPS 202-10

DROPS 202-10
Change language:

Video #1399, listed in: Learn to knit, Knitting tips & tricks, Neck

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Sophia wrote:

Begrijp ik goed dat je in ribbelsteek blijft breien totdat uitleg voor de pas begint? Naar mijn idee moet de tricotsteek beginnen na dat de 52 steken zijn opgezet, ik kom er niet uit en kijk uit naar uw reaktie! Alvastbedankt!

18.12.2021 - 18:49

DROPS Design :

Dag Sophia,

Ja, dat klopt. De halsranden brei je in ribbelsteek en de pas in tricotsteek.

06.01.2022 - 11:34

Country flag Regina wrote:

Beste, In het filmpje op tijdstip 12.30, is de rechter schouder (rs) aan de extra steken en de linker schouder vast gebreid. Deze fase is als het ware klaar. Echter er is nog de oorspronkelijke werkdraad van de rechter schouder, nu dus in het midden van het werk. Wat doe ik daarmee?

03.03.2021 - 11:31

DROPS Design :

Dag Regina,

Deze kun je afknippen en afhechten.

27.03.2021 - 16:17

Country flag Ylva Mattsson wrote:

Jag förstår verkligen inte hur man kom från att fästa de två halskantsbitarna på en rundsticka och sen så var hela oket färdigt? Hur kommer det sig att oket sitter fast i långsidan av halskanterna när man lade upp maskor som om man skulle sticka från kortsidan? Att läsa mönstret hjälper inte. Det är mer eller mindre obegripligt när det gäller den här delen.

24.02.2020 - 19:50

DROPS Design :

Hej Ylva, du måste följa oket enligt mönstret. Skriv din nästa fråga i själva mönstret, och beskriv hur långt du har kommit och vad det är du inte förstår. Så kan vi lättare guida dig vidare enligt beskrivningen. Lycka till :)

26.02.2020 - 13:09

Country flag Anita wrote:

Merci- très bien expliqué

29.10.2019 - 21:59

Country flag Faustine wrote:

Merci beaucoup pour ce tutoriel, cela m'a beaucoup aidée !

17.10.2019 - 21:00

Country flag Gert wrote:

Ik begrijp niet waarom er 52 steken tussen gezet worden tussen beide halsrand delen en de volgende beelden bij het aannaaien die nergens meer te zien zijn. Waartoe dienen die extra steken ? Waar zijn die naartoe ? Ook in het model worden die steke bijgezet maar ik vind ze nergens terug bij het ineenzetten.

17.04.2019 - 10:18

DROPS Design :

Dag Gert,

De opgezette steken zijn de hals lijn die loopt over de schouder, dan via het achterpand (waar je in de laatste beelden 1 markeerdraad midden achter ziet) en over de andere schouder vervolgens terug. Nadat je de 52 steken hebt opgezet ben je in het patroon bij het laatste gedeelte van de paragraaf boven de PAS. Daarna brei je dus de pas met der raglan (in de beelden zie je ook de raglanlijnen.

11.08.2019 - 15:26

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work a simple v-neck
8:36
How to work a simple v-neck

In this DROPS video we show how to work a simple v-neck in rib with 1 knit / 1 purl. The same technique can be used in the rib when knit 2 / purl 2. First, we show how we knit up stitches, then we knit all the stitches from the wrong side, then we work the rib and at the same time on every 2nd row we decrease 2 stitches mid-front as follows: Work until there is 1 stitch left before the knitted stitch mid-front, slip 2 stitches as if to knit together, knit 1, pass the 2 slipped stitches over the knitted stitch (= 2 stitches decreased). This gives you a neat edge and the knitted stitch follows in a straight line. We use the yarn DROPS Snow in the video. You must read a pattern with this technique to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to work a double knitted V-neck with knit 2 / purl 2
9:57
How to work a double knitted V-neck with knit 2 / purl 2

In this DROPS video we show how we work a double knitted V-neck. The neck should be worked in the round, but we only show parts of what happens on the front piece. We are showing: 1) Time: 00.04-01.36. How to put the 2 mid-stiches on a needle and knit, and at the same time knit up stitches from the right side on the neckline. Insert 1 marker between the 2 mid-stitches; these stitches are always knitted. Knit up 2 more stitches on the left side, but the number of stitches must be divisible by 4. 2) Time: 01:37 -03:12. Count back to the beginning of the round so the mid-stitches are knitted when working rib. Work rib (knit 2, purl 2), until there are 2 stitches left before the marker, knit 2 together (even it one stitch should have been a purl stitch), then slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch = 2 knitted stitches mid-front, purl 1 stitch and continue the rib to the end of the round. 3) Time: 03:13 -04:10. Decrease like this on the next round. Above the 6 middle stitches, there will then only be knitted stitches. 4) Time: 04:12 -04:29. Work in the round and decrease on every round until the finish measurement. 5) Time: 04:30-05:52. Work 1 round without decreasing = folding edge. 6) Time: 05:54-08:21. Now increase on each side of the mid-stitches every round as follows: Work rib until there is 1 stitch left before the marker, make 1 yarn over, knit 2 (mid-stitches), 1 yarn over and work rib to the end of the round; yarn overs are worked twisted on the next round. 7) Time: 08:25-09:06. Continue to increase until the finish measurement. Cast off with knit over knit and purl over purl. 8) Time: 09:10-09:38. Fold the neck double to the inside and sew a couple of stitches to keep it in place. 9) Time: 09:39-09:56. Finish the double knitted V-neck. We use the yarn DROPS Snow in the video. You must read a pattern with this V-neck to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work a double knitting edge
4:11
How to work a double knitting edge

In this DROPS video we show how to work a double knitting edge with 1 stockinette stitch. Nice to use for a neck edge or sleeve edge. Cast on somewhat tightly the stitch numbers it says in the pattern and work like this: ROUND 1: * Slip 1 stitch purlwise, with strand in front of piece, knit 1 *, work from *-* the entire round. ROUND 2: * Purl 1, slip 1 stitch purlwise, with strand behind piece *, work from *-* the entire round. Repeat 1st and 2nd round until the measurement is reached. We use the yarn DROPS Snow in the video.You must read a pattern to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work a double neck together
2:40
How to work a double neck together

In this DROPS video we show how to work a double neck edge together. Cast on with 2 small needles or 1 thick needle, this makes the cast-on edge elastic. Work the rib as it says in the pattern and when it has the right length, fold the neck double to the inside. Work the next round of rib as before, working every other stitch together with every other stitch on the cast-on edge. We use the yarn DROPS Snow in the video. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work a neckline with a slight bend in the neck
11:05
How to work a neckline with a slight bend in the neck

In this DROPS video we show how to cast off on the neck edge, so that it gets a slightly better fit in the neck, as is done in the "Wild Mint Tea Jacket" in DROPS 227-6. We have only worked a small part of the jacket with a smaller number of stitches than what is written in the pattern and we work only a small part of the band before we cast off. This jacket is worked in DROPS Alpaca and DROPS Kid-Silk but in the video, we use a thicker yarn; DROPS Snow. The seam in the middle at the back can look a bit thick, so at the end we show 2 parts that are sewn together with DROPS Alpaca and DROPS Kid-Silk. You must read a pattern with this neckline to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How assembly a double neck edge on the inside of a garment
2:17
How assembly a double neck edge on the inside of a garment

In this DROPS video we show how to sew a rib / neck edge on the inside of a garment. Work the rib / neck edge as it is written in a pattern and when assembly fold the rib at the top of neck down on the inside of garment. Fasten rib but to avoid a tight neck edge and avoiding the edge to tip outwards, it is important to make the seam elastic. We use the yarn DROPS Snow in this video