DROPS Super Sale - SAVE 30% on 5 soft merino yarns!

How to knit stripes back and forth

Video thumbnail for How to knit stripes back and forth
In this DROPS video we show how to knit stripes back and forth on the needle.

When you knit stripes you can carry along the yarn not in use along the edge. This way you don't have multiple thread ends to fasten afterward. Before each new row from RS twist the working yarn around the tread/threads not in use, and then continue.

You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.

Patterns using this technique

DROPS 252-25

DROPS 252-25
DROPS 252-35

DROPS 252-35
DROPS 255-31

DROPS 255-31
DROPS 254-2

DROPS 254-2
Change language:

Video #121, listed in: Learn to knit, Knitting tips & tricks, How to knit stripes

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag JZ wrote:

I have a problem following instructions for back rise. I assume that at this point we still knit back & front (not in the round). In this case my marker (transition from right sleeve to back) is the beginning on my knit. Based on the instruction , I must use part of the right and left sleeve in rising, and that I cannot qdo (or do not know how). I know how to rise only back (27 sts)

27.03.2023 - 22:03

DROPS Design :

Dear Jz, could you please tell us which pattern you are working on? If you are working the elevation on back piece, maybe this video might be the one that could help you. Happy knitting!

28.03.2023 - 10:31

Country flag Claudia wrote:

Grazie mille il vostro video come sempre lo trovo molto chiaro ,ma se ho quattro o più strisce di diversi colori devo far seguire i 4fili o li taglio?

14.08.2021 - 09:43

DROPS Design :

Buongiorno Claudia, se le strisce non sono troppo distanziate può portare avanti tutti i colori, se invece le parti sono ampie, meglio tagliare i fili. Buon lavoro!

16.08.2021 - 13:00

Country flag Claudia wrote:

Salve voglio fare una sciarpa con diverse strisce colorate. non so come aggiungere il nuovo colore all inizio del ferro. avete magari un video esplicativo? ho provato ma il risultato è stato un pasticcio

08.08.2021 - 12:02

DROPS Design :

Buonasera Claudia, questo video è proprio quello che le serve. Buon lavoro!

13.08.2021 - 22:53

Country flag Helga wrote:

Hallo Streifen super gezeigt im Video. Ich möchte aber die Kinder Jacke mit den 9 Farben stricken. wie mache in den Farbwechsel bei der Knopflochblende bei 5 Maschen kraus rechts für die Blende. Da wird die Seite mit den Farben ziemlich dick und Faden bei jeder Farbe abschneiden? wie kann man diese sauber vernähen. Obwohl ich eine gute Strickerin bin, habe ich Probleme mit Farben wechseln bei Knopfblende. Bitte um Hilfe. Danke

30.05.2021 - 10:32

DROPS Design :

Liebe Helga, in diesem Fall können Sie die Farbe beim Übergang zwichen Blende und Vorderteil ändern - dieses Video könnte vielleicht helfen. Viel Spaß beim stricken!

31.05.2021 - 08:52

Country flag Anna Maria Vitulano wrote:

Buonasera. Questo video mostra come lavorare a strisce utilizzando due colori. Per il modello 202/2 (che io sto lavorando), si utilizzano più colori. Come nascondere tutte le cosine? Grazie della cortese collaborazione.

24.05.2020 - 18:29

DROPS Design :

Buonasera Anna Maria, può nascondere le codine nella parte di lavoro del relativo colore, seguendo le maglie in modo che non si veda il filo. Buon lavoro!

17.11.2020 - 19:28

Country flag Алексей wrote:

Перезвоните мне пожалуйста по номеру 8 (812) 200-42-35 Алексей, для связи со мной нажмите кнопку 1.

04.12.2019 - 15:41

Country flag Noelle wrote:

Hoe maak je een kantsteek als je begint met de nieuwe kleur?

30.10.2019 - 09:11

DROPS Design :

Dag Noelle,

De kantsteek maak je op dezelfde manier als normaal. Bij het in elkaar zetten van het kledingstuk valt de kantsteek namelijk weg naar de binnenkant van het kledingstuk en dus kun je niet zien met welke kleur de kantsteek is gemaakt. Zelf maak ik de kantsteek altijd aan het begin van de naald met de nieuwe kleur en (indien van toepassing) aan het eind van de naald met de oude kleur.

26.12.2019 - 19:36

Country flag Susanne Mayr wrote:

Perfekt gezeigt. Danke. Das hat mir wirklich weiter geholfen. Jetzt wächst mein Schal.

26.01.2019 - 06:20

Country flag Adrienne wrote:

How do you bind off your work when your finished when carrying the yarn up the side?

05.06.2018 - 16:07

DROPS Design :

Dear Adrienne, if the cast off edge will be hidden (like when stitches are picked up afterwards, or if it would be sewn) you can cast of with both yarn. In other cases, leave the yarn you carried out, and cast off with the main yarn. The other thread can be sewn in later. Happy Knitting!

28.08.2018 - 01:43

Country flag Jana wrote:

Ich habe folgende frage zum Streifen stricken: Wie würde ich hier vorgehen, wenn ich mit Randmaschen stricke, also immer die erste Masche wie zum Links stricken abhebe? Dann würde man ja erst bei der zweiten Masche einer Reihe den Faden wechseln und das sieht irgendwie komisch aus?

17.03.2018 - 22:56

DROPS Design :

Liebe Jana, am besten können Sie eine kleine Maschenprobe mit dieser Technik stricken, so sehen Sie wie es aussehen wird. Dieses Video zeigt, wie man die Farben neben den äußersten Maschen wechselt. Viel Spaß beim stricken!

19.03.2018 - 11:54

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work 1st row with color changing with knit and purl stitches
4:02
How to work 1st row with color changing with knit and purl stitches

In this DROPS video we show how we can avoid the "dots" on 1st row when changing color, seen from the right side (RS). On the RS row, where it changes color, we purl 10 stitches and knit 10 stitches, so you can easily see the difference. On next row knit all stitches, from the wrong side (WR). We use the yarn DROPS Snow in the video.
Video thumbnail for How to work 1st row with color changing in a rib
6:02
How to work 1st row with color changing in a rib

In this DROPS video we show how we can avoid "dots" on the parties of purl stitch (from right side) when changing color. On the row with change color, knit all stitches, but on next row continue working rib (in this video; knit 2, purl 2). We use the yarn DROPS Snow in the video.
Video thumbnail for How to avoid getting a large stitch when changing thread
1:45
How to avoid getting a large stitch when changing thread

In this DROPS video we show one way how to avoid getting a large first and last stitch when changing thread. Tie the new thread into the old thread, but do not tie it with a knot but with a loop. Tighten the loop and push it to the knitting piece. Now continue working with the new thread, knit a few rounds and then pull on the loop to loosen it. Then you will get a nice transition where it changes thread. Fasten the threads as usual when the work is done. We use the yarn DROPS Snow in the video.
Video thumbnail for How to knit stripes with no jog / Helix knit
5:31
How to knit stripes with no jog / Helix knit

In this DROPS video we show how to knit stripes in the round without getting a jog in the transition, also called Helix knitting. In this video we use 3 colors and knit 13 stitches before changing color. Be sure to keep the colors separated and do not let the skeins cross when changing color. Every round there is one color knitted over 26 stitches. Do not tighten too much when changing color. We use the yarn DROPS Snow in the video.
Video thumbnail for How to change color inside edge stitches
4:43
How to change color inside edge stitches

When you knit stripes, it's a good idea to change the color inside the edge stitches, so that the loose ends or long strands behind the work don't run along the outermost front edge. In this DROPS video we show how to change color within 5 edge sts. To make it clear, we knit the 5 edge sts in stockinette stitch, the transition inside the edge sts in garter st and the rest in stockinette st. Finally, we show how the transition looks like when you work the front edge in seed stitch, and how it looks like when you work the whole piece in garter st using a finer yarn. There will always be more or less of a notch at the color change. With this bulky yarn it shows more. If you work in a finer multicolored yarn the transition will not be visible. You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.
Video thumbnail for How to knit stripes in the round with no jog
3:39
How to knit stripes in the round with no jog

In this DROPS video we show how to knit stripes in the round without getting a jog in the transition. Change to a new color and work 1 round. Work the first stitch on the next round like this: Pick up the stitch under the first stitch on the left needle (pick up from behind in the front loop), and put it into the left needle. Knit the stitch together with the next stitch on the left needle. In this way, the transition becomes less visible. You can carry to other color along on the inside of the work. If the stripes are wide, you can twist the colors at the end of round on every 3 cm/ every 1 inch. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.