NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click
here.
There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms"
here.
For this pattern in American English, please click
here.
PATTERN:
See diagram A.1.
CROCHET INFO:
Replace first dc at beg of every dc round with 1 ch. Finish every round with 1 sl st in ch from beg of round.
Replace first tr at beg of every tr round with 3 ch. Finish round with 1 sl st in 3rd ch at beg of round.
FRINGES:
1 FRINGE = Cut 2 lengths of 40 cm each. Fold them double and pull loop through ch-space. Then pull yarn ends through the loop. Cut fringes to a length of approx. 19 cm.
----------------------------------------------------------
DRESS:
Work 28 crochet squares before sewing them tog for front and back piece. Then work mesh pattern in the different sizes. Then work front and back piece tog.
CROCHET SQUARE:
Work a crochet square as follows - see diagram A.1:
Work 5 ch with Safran on hook size 3.5 mm and form a ring with 1 sl st.
ROUND 1: Work 3 ch (= 1 tr), then work 2 tr in ch-ring, * 3 ch, 3 tr in ch-ring *, repeat from *-* 6 more times, 3 ch, 1 sl st in 3rd ch at beg of round, 1 sl st in each of the next 3 sts (i.e. 1 sl st in the 2 next tr, 1 sl st in next ch).
ROUND 2: 3 ch (= 1 tr), 2 tr in ch-space, 3 ch, 3 tr in same ch-space, * 4 ch, 1 dc in next ch-space, 4 ch, 3 tr in ch-space, 3 ch, 3 tr in same ch-space *, repeat from *-* (= A.1) 2 more times, 4 ch, 1 dc in next ch-space, 4 ch, 1 sl st in 3rd ch at beg of round, 1 sl st in each of the next 3 sts.
ROUND 3: 3 ch (= 1 tr), 2 tr in ch-space, 3 ch, 3 tr in same ch-space, * 5 ch, 1 dc in next ch-space, 5 ch, 1 dc in next ch-space, 5 ch, 3 tr in ch-space, 3 ch, 3 tr in same ch-space *, repeat from *-* (= A.1) 2 more times, 5 ch, 1 dc in next ch-space, 5 ch, 1 dc in next ch-space, 5 ch, 1 sl st in 3rd ch at beg of round, 1 sl st in each of the next 3 sts. REMEMBER THE CROCHET TENSION!
ROUND 4-9: Continue as shown in diagram. Repeat A.1 4 times in total on round but finish as shown in diagram. I.e. do not work last tr-group in corner in A.1 the 4th time A.1 is repeated. Finish every round with 1 sl st in 3rd ch on round and 1 sl st in the next 3 sts.
ROUND 10: Work 1 ch, 2 dc in ch-space, 3 ch, 2 dc in same ch-space, continue as shown in A.1. Finish with 1 sl st in first ch on round, 1 sl st in each of the next 2 sts.
ROUND 11: 8 ch (= 1 tr + 5 ch), 1 tr in ch-space, continue as shown in A.1. Finish with 1 sl st in 3rd ch on round. Fasten off.
Work another 27 squares the same way (= 28 squares).
ASSEMBLY:
Sew tog crochet squares as shown in chart. Make sure that to avoid a tight seam. You now have 2 similar parts that consist of 14 squares each.
SHOULDER:
Now work shoulder in mesh pattern - READ CROCHET INFO. Beg with 1 sl st in ch-space in corner on 5th square - see chart.
ROW 1: Work 3 ch, * 1 ch, 1 tr in next tr *, repeat from *-* over 5th and 4th square. Work 1 tr in seam between the two squares. Finish with 1 ch and 1 tr in seam between 4th and 3rd square.
Turn and work like this back and forth until mesh pattern has been worked for 5-6-7 cm. Fasten off. Work shoulder the same way but reversed over 2nd and 1st square. Repeat on the other part.
Sew shoulder seam neatly tog in one and one st. Make sure that to avoid a tight seam.
SIDES:
Now work in each side as follows: Beg with 1 sl st in ch-space in corner on 14th square - see chart.
S/M: Work 1 ch, * 1 ch, 1 dc in next ch-space *, repeat from *-* over 14th, 11th and 8th square and continue the same way under sleeve (= 5th square). Work the same way in the other side. Repeat on the other part.
L/XL – XXL/XXXL: Work 3 ch, * 1 ch, skip 1 ch, 1 tr in next tr *, repeat over 14th, 11th and 8th square. Turn and work the same way back and forth until mesh pattern has been worked for 4-8 cm. Work the same way in the other side. Repeat on the other part.
EDGE AT THE BOTTOM:
Work an edge at the bottom as follows, beg from RS:
S/M: Beg with 1 sl st in ch-space in corner. Work like this 1 ch, * 1 ch, 1 dc in next ch-space *, repeat from *-* along entire bottom edge.
L/XL – XXL/XXXL: Beg with 1 sl st in first tr in corner at the bottom edge. Work 3 ch, * 1 ch, 1 tr in next tr *, repeat from *-* along the entire bottom edge, turn and work the same way back and forth for 3-6 cm. Repeat on the other part.
ASSEMBLY:
Sew side and underarm seams neatly tog one by one st but leave 22-25-28 cm for vent in each side. Crochet an edge around the neck as follows: Fasten the strand in shoulder seam, work 1 ch, * 1 ch, 1 dc in next ch-space *, repeat from *-* around the entire neck. Finish with 1 ch, 1 sl st in first ch on round. Fasten off. Insert FRINGES - see explanation above, in every other ch-space along bottom edge.
SLEEVE EDGE:
Crochet along the sleeve edge as follows: Beg with 1 sl st mid under sleeve and work as follows from RS:
S/M: 1 ch, * 1 ch, 1 dc in next ch-space *, repeat from *-* around the entire sleeve edge and finish with 1 ch, 1 sl st in 1st ch at beg of round. Repeat around the other sleeve edge.
L/XL - XXL/XXXL: 3 ch, * 1 ch, 1 tr in next tr *, repeat from *-* around the entire sleeve edge. Finish with 1 ch, 1 sl st in 3rd ch on round. Continue like this until edge measures 2-4 cm. Repeat around the other sleeve edge.
Diagram
|
= ch |
|
= sl st |
|
= tr around ch-space |
|
= tr in st |
|
= dc around ch-space |
|
= dc in st |
|
= beg here |
|
= beg here when working shoulder |
|
= beg here when working side |
|
= beg here when working bottom edge |

Hallo! Ich habe jetzt das 1. Quadrat gehäkelt und wenn ich es mit dem Bild des Kleides vergleiche, sieht es so aus als ob nach der 11. Runde (laut Anleitung die letzte Runde) noch mindestens eine Runde kommen müsste. Wenn die 11. Runde wirklich die letzte sein soll, kann man ja auch schlecht zwei Quadrate aneinandernähen ohne dass es komisch aussieht. Es würden dann ja zwei Stäbchen-Loch- Reihen aneinander stossen, was eben auf dem Foto nicht so aussieht. Danke für die Aufklärung!
28.04.2019 - 09:22DROPS Design answered:
Liebe Steffie, die letzte Reihe der Quadrat is die Stäbchen-Loch-Reihe, wenn die Quadrate dann zusammengenäht werden, wird dann zwischen den Loch-Reihen etwas "breiter" aussehen. Viel Spaß beim häkeln!
02.05.2019 kl. 08:45Bonjour je suis entrain de realiser ce superbe modèle mais j ai un soucis . lorsque que l on crochete les cotés , faut il accrocher sous la manche avant de tourner ? merci pour votre reponse
16.05.2018 - 16:59DROPS Design answered:
Bonjour Mme Hemery, pas besoin d'accrocher la bordure sous la manche avant de tourner, les coutures seront faites après, vous pourrez alors faire l'assemblage à ce moment-là. Bon crochet!
17.05.2018 kl. 08:00HI Could someone tell me the measurements on the completed square please. Thanks
11.11.2017 - 15:48DROPS Design answered:
Hi Davies, 1 square = 22 cm. If you need further measurements, there is a diagram at the bottom of the page. Happy crocheting!
12.11.2017 kl. 06:51Czy wiadomo ile włóczki potrzeba na jeden kwadrat? Chciałam zrobić krótszą wersję tej sukienki i nie wiem ile odjąć.
07.07.2017 - 11:34DROPS Design answered:
Witaj Anno, na całą sukienkę potrzeba 28 kwadratów, jak podzielisz ilość włóczki potrzebną do wykonania twojego rozmiaru przez 28 to mniej więcej otrzymasz ile włóczki potrzeba na 1 kwadrat. Możesz również wykonać 1 kwadrat i zważyć go. POWODZENIA!
07.07.2017 kl. 21:40I am unable to find yarn quantities needed for this design. How many skeins should I order for XXXXL size?
21.05.2017 - 00:04DROPS Design answered:
Hi Pam, 950g should be enough for XXXXL. Kind regards, Deirdre
21.05.2017 kl. 09:56Also, ich habe das Kleid ja gemacht, und habe es nun teilweise wieder aufgetrennt, weil ich die Jacke 162-21 jetzt draus mache. Das Kleid ist leider voll der Sack..... :-( Ich wollte das mal berichten, falls sich noch wer die Mühe macht und dann auch so enttäuscht ist. Sicher, man kann es durch die Skizze auch sehen, dass es nicht tailliert ist und so, aber das Model steht da schon sehr geschickt...... Ich dachte, ich berichte mal von meinen Erfahrungen....Es grüßt Sabine
30.07.2015 - 14:27DROPS Design answered:
Liebe Sabine, schade, dass Ihnen das Kleid nicht gefällt, es ist Geschmackssache, ob man einen geraden Schnitt mag oder nicht. Eine Möglichkeit, das Kleid etwas zu taillieren, ist, eine Kordel um die Taille zu binden bwz. durch das Muster zu fädeln. Ich hoffe, Sie sind mit der Jacke zufrieden!
01.08.2015 kl. 09:59Wie nähe ich am besten die einzelnen Quadrate zusammen, damit es möglichst glatt aussieht? ?? Habt ihr da einen Tipp für mich?
08.05.2015 - 11:37DROPS Design answered:
Schauen Sie mal im Kopf neben dem Foto unter Videos, dort gibt es eine Videoanleitung "Häkelquadrate zusammennähen", vielleicht hilft Ihnen das weiter. Es sollte auf diese Weise jedenfalls eine flache Naht ergeben.
08.05.2015 kl. 11:45......ich nochmal. Ich habe wohl das Bild falsch gedeutet: dort sieht es aus, als wenn die Ärmel nochmal extra mit Netzmuster verlängert wurden. Es scheint aber nicht so zu sein.....
13.03.2015 - 16:09DROPS Design answered:
Das Netzmuster gilt für die Schultern, die Ärmel werden nur aus den Quadraten + Blende gebildet. Wenn Sie genau hinschauen, können Sie das Quadrat, das den Ärmel bildet, erahnen.
14.03.2015 kl. 18:14Kann es sein, dass in der Anleitung nicht die Ärmel angegeben sind?? Ich habe Vorder- und Rückenteil fertig und die Schulternähte zusammengenäht. Die Anleitung für die Ärmel finde ich aber nicht........kann mir da bitte einer helfen? Grüße.
13.03.2015 - 15:44DROPS Design answered:
Die Ärmel werden nur aus den Quadraten 1 und 5 gebildet, wie in der Maßskizze ersichtlich. Dann wird noch die Ärmelblende angehäkelt, diese ist aber nicht besonders lang.
14.03.2015 kl. 18:15Å så flott. Denne skal jeg hekle.
25.02.2015 - 23:04