DROPS / 142 / 3

Delilah by DROPS Design

Knitted DROPS hat and scarf and gloves with lace pattern in ”BabyAlpaca Silk”.

DROPS design: Pattern no bs-029
Yarn group A
-----------------------------------------------------------
HAT:
Size: S/M - M/L
Head circumference: approx. 54/56 cm - 56/58 cm
Materials:
DROPS BABYALPACA SILK from Garnstudio
50-100 g colour no 4088, heather

DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (40 cm) SIZE 3 mm - or size needed to get 24 sts x 32 rows in stocking st = 10 x 10 cm.
DROPS CIRCULAR NEEDLE (40 cm) SIZE 2.5 mm – for rib.

SCARF:
Measurements: approx. 30 x 160 cm
Materials:
DROPS BABYALPACA SILK from Garnstudio
200 g colour no 4088, heather

DROPS STRAIGHT NEEDLES SIZE 3 mm - or size needed to get 24 sts x 32 rows in stocking st = 10 x 10 cm.

GLOVES:
Size: S/M - M/L
Materials:
DROPS BABYALPACA SILK from Garnstudio
50-100 g colour no 4088, heather

DROPS DOUBLE POINTED NEEDLES SIZE 2.5 mm - or size needed to get 26 sts x 34 rows in stocking st = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

70% Alpaca, 30% Silk
from 4.10 £ /50g
DROPS BabyAlpaca Silk uni colour DROPS BabyAlpaca Silk uni colour 4.10 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 24.60£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
HAT AND SCARF:
PATTERN:
See diagrams A.1 to A.6. Diagrams show pattern from RS.

GARTER ST (back and forth on needle):
K all rows.
----------------------------------------------------------

HAT:
Worked in the round on circular needle.
Cast on 104-112 sts on circular needle size 2.5 mm with BabyAlpaca Silk. K 1 round, then work rib (= K 2/P 2). When piece measures 4-5 cm, work next round as last round in diagram A.1 = 117-126 sts on needle. Switch to circular needle size 3 mm and work PATTERN according to diagram A.2 until piece measures 22-23 cm. Work next round as follows: * K 2, P 2 tog, slip 1 st as if to K, K 2 tog, psso, P the next 2 tog *, repeat from *-* the entire round = 65-70 sts remain on needle (switch to double pointed needles when needed). * Work 2 cm in stocking st, K all sts tog 2 by 2 *, repeat from *-* 1 more time = 17-18 sts remain on needle. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

SCARF:
The scarf consist of 2 equal parts that are sewn together in the middle at the end.
Cast on 258 sts on needle size 3 mm with BabyAlpaca Silk. P 1 row from WS. Then work next row as follows from RS: 4 edge sts in GARTER ST - see explanation above - * K 8, P 3 *, repeat from *-* until 12 sts remain and finish with K 8 and 4 edge sts in GARTER ST. Continue rib like this with 4 edge sts in garter st in each side until piece measures 3 cm. On next row from RS dec 1 st on each side of every K-section by working all K 8 sts as follows (P 3 as before): Slip 1 st as if to K, K 1, psso, K until 2 sts remain, K 2 tog.
Repeat dec on every row from RS 2 more times = 120 sts (all K 8 sts are now dec to K 2). Continue with K over K and P over P. AT THE SAME TIME on next row from RS dec all 3 P sts to 2 P sts (P tog the first 2 sts) = 98 sts. On next row from RS inc as shown on last row in diagram A.1 = 109 sts. Then work PATTERN according to diagram A.2 - beg from WS as follows: 4 edge sts as before, P 2, work A.2 until 4 sts remain and finish with 4 edge sts as before. When piece measures approx. 22 cm – adjust after 1st or 5th row in diagram – work next row as follows from RS: 4 edge sts as before, work A.3 one time, then work A.4 until 15 sts remain on row, finish with A.5 and then 4 edge sts as before = 77 sts remain on needle. Then work A.6 with 4 edge sts in each side as before until piece measures approx. 80 cm – adjust so that next row is from RS. K 1 row while AT THE SAME TIME dec 5 sts evenly = 72 sts on needle. K 1 row from WS and then loosely cast off with K from RS. Knit another part the same way.

ASSEMBLY:
Sew the two parts tog in front loop of outermost st along cast off edge. Scarf measures approx. 160 cm in length.
----------------------------------------------------------

GLOVES:
PATTERN:
See diagrams A.1, A.2 and A.7.

INCREASE TIP:
Inc 1 st by making 1 YO. To avoid holes K YO twisted on next round.
----------------------------------------------------------

LEFT GLOVE:
Worked in the round on double pointed needles. Cast on 110-132 sts on double pointed needles size 2.5 mm with BabyAlpaca Silk. K 1 round. Work next round as follows: * K 8, P 3 *, repeat from *-* the entire round. Continue rib like this until rib measures 1 cm. On next round dec 1 st on each side of every K-section by working all K 8 sts as follows (P 3 as before): Slip 1 st as if to K, K 1, psso, K until 2 sts remain, K 2 tog. Repeat dec on every other round 2 more times = 50-60 sts (all K 8 sts are now dec to K 2). Work 1 round with K over K and P over P. On next round dec all 3 P sts to 2 P sts (P tog the first 2 sts) = 40-48 sts. Work 1 round with K over K and P over P, then inc as shown on last round in diagram A.1 = 45-54 sts. Then work PATTERN according to diagram A.2. When piece measures 6-7 cm – adjust after 2nd, 6th, 10th or 14th round in diagram, K 1 round while AT THE SAME TIME inc 3 sts evenly in Size S/M (do not inc in Size M/L) = 48-54 sts. Insert a marker in the 12th-13th st on round - NOW MEASURE PIECE FROM HERE.
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING! When piece measures 2 cm, beg inc for thumb gusset. Inc 1 st on each side of next to last st on round (i.e. inside hand) – READ INCREASE TIP. Repeat inc on each side of the inc sts on every 3rd round 4-5 more times = 11-13 thumb sts and 58-66 sts in total. AT THE SAME TIME when piece measures 3 cm, work PATTERN according to diagram A.7 mid on top of hand (st with marker should fit with st marked with arrow and star in diagram). When A.7 has been worked one time vertically (stop at arrow for your size), continue in stocking st in the round over all sts. AT THE SAME TIME when piece measures 6-7 cm, slip thumb sts + 1 st on each side (= 13-15 sts) on a stitch holder. Cast on 3 new sts behind the thumb = 48-54 sts. Continue in stocking st in the round until piece measures 10-11 cm. Now slip the first 19-21 sts on top of hand on a stitch holder, keep the next 11-12 sts on needle and slip the last 18-21 sts inside the hand on another stitch holder.

LITTLE FINGER:
= 11-12 sts, cast on 1 new st towards sts on stitch holders = 12-13 sts. Work in stocking st in the round for approx. 5½-6½ cm, then work all sts tog 2 by 2. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

HAND:
Slip sts from stitch holders back on the needles, knit in addition up 2 sts towards the little finger = 39-44 sts. Work 2 rounds in stocking st. Keep the 2 sts that were knit up towards the little finger + 6-6 sts on top of hand and 5-6 sts inside the hand on the needle. Slip the remaining sts back on the stitch holders (= 13-15 sts on top of hand and 13-15 sts inside the hand).

RING FINGER:
= 13-14 sts, cast on 1 new st towards sts on stitch holders = 14-15 sts. Work in stocking st in the round for approx. 7-8 cm, then work all sts tog 2 by 2. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

MIDDLE FINGER:
Slip 6-7 sts from each stitch holder back on needle, knit in addition up 2 sts towards the ring finger and cast on 1 new st towards sts on stitch holders = 15-17 sts. Work in stocking st in the round for approx. 7½-8½ cm, then work all sts tog 2 by 2. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

INDEX FINGER:
Slip the remaining 14-16 sts from stitch holders back on needles, knit in addition up 2 sts towards the middle finger = 16-18 sts. Work in stocking st in the round for approx. 6½-7½ cm, then work all sts tog 2 by 2. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

THUMB:
Slip the sts over thumb gusset on the needles and knit in addition up 3 sts along the edge behind the thumb sts = 16-18 sts. Work in stocking st in the round for approx. 5½-6 cm, then work all sts tog 2 by 2. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

RIGHT GLOVE:
Work as left glove but reversed, i.e. insert a marker in the 37th-42nd st on round (instead of the 12th-13th st) and inc for thumb gusset on each side of second st on round instead of next to last st on round.





Diagram

= K from RS, P from WS
= P from RS, K from WS
= 1 YO between 2 sts, K YO from RS, or P YO from WS on next round/row
= K 2 tog
= slip 1 st as if to K, K 2 tog, psso

Ida 27.01.2019 - 00:22:

Stämmer det i mönstret till mössan att " * Sticka 2 cm slätst, sticka alla m räta tills 2 och 2 *, upprepa *-* 1 gång till" efter att man stickat klart a2? Ska jag alltså sticka slätstickning flera varv i 2cm innan jag gör ett varv med alla räta 2 o 2 tillsammans?

DROPS Design 28.01.2019 kl. 19:00:

Jo, du stickar 2 cm i slätstickning, sedan minskar du och så upprepar du med 2 cm slätstickning och 1 varv med minskningar en gång till.

Edna Übel 12.12.2018 - 21:39:

Hallo, ich möchte den Schal schmaler stricken. Durch wieviel muss die Anzahl der aufzunehmenden Maschen teilbar sein?

DROPS Design 13.12.2018 kl. 09:23:

Liebe Frau Übel, leider können wir nicht jede Anleitung nach jeder individuellen Frage anpassen. Nehmen Sie bitte Kontakt mit dem Laden auf, wo Sie die Wolle gekauft haben - auch telefonisch oder per E-Mail. Viel Spaß beim stricken!

Paola 23.11.2015 - 22:34:

Grazie, ma ho ancora una domanda : il 2^ ferro del diagramma M2 e' lavorato da destra verso sinistra? E le 2 maglie al rovescio dopo le 4 di vivagno ci devono essere sempre? Grazie ancora. Paola

DROPS Design 24.11.2015 kl. 15:40:

Buonasera Paola. Al secondo ferro (e in tutti i ferri pari) legge il diagramma da destra verso sinistra e lavora come segue: 4 m vivagno, ripete 5 volte e mezzo il diag. A.2, 2 m dir (sono le 2 m che al ferro precedente ha lavorato a rov), 4 m vivagno. In questo modo il motivo dovrebbe risultare allineato. Buon lavoro!

Paola 23.11.2015 - 18:25:

Grazie, ma ho ancora una domanda : il 2^ ferro del diagramma M2 e' lavorato da destra verso sinistra? E le 2 maglie al rovescio dopo le 4 di vivagno ci devono essere sempre? Grazie ancora. Paola

DROPS Design 23.11.2015 kl. 18:40:

Buonasera Paola. Al secondo ferro (e in tutti i ferri pari) legge il diagramma da destra verso sinistra e lavora come segue: 4 m vivagno, ripete 5 volte e mezzo il diag. A.2, 2 m dir (sono le 2 m che al ferro precedente ha lavorato a rov), 4 m vivagno. In questo modo il motivo dovrebbe risultare allineato. Buon lavoro!

Paola 23.11.2015 - 17:52:

Grazie, ma ho ancora una domanda : il 2^ ferro del diagramma M2 e' lavorato da destra verso sinistra? E le 2 maglie al rovescio dopo le 4 di vivagno ci devono essere sempre? Grazie ancora. Paola

DROPS Design 23.11.2015 kl. 18:40:

Buonasera Paola. Al secondo ferro (e in tutti i ferri pari) legge il diagramma da destra verso sinistra e lavora come segue: 4 m vivagno, ripete 5 volte e mezzo il diag. A.2, 2 m dir (sono le 2 m che al ferro precedente ha lavorato a rov), 4 m vivagno. In questo modo il motivo dovrebbe risultare allineato. Buon lavoro!

Paola 20.11.2015 - 21:52:

Ho un problema col motivo A2 : sul ferro ci sono 109 maglie, si inizia dal rovescio del lavoro, viene lavorato da destra a sinistra, 2^ ferro da sinistra a destra che è quello col motivo che è formato da 18 maglie, ma 101 (ho tolto le 8 maglie di vivagno) non è un multiplo di 18 quindi i ferri successivi non hanno una sequenza cioè non vedo i buchi in verticale ma sfalsati e neanche con senso logico. Alla fine del ferro rimangono 11 maglie (escluso il vivagno). Non capisco dove sbaglio. Grazie

DROPS Design 22.11.2015 kl. 16:22:

Buongiorno Paola. Il motivo inizia sul rovescio del lavoro. La prima riga viene letta da sinistra verso destra. Deve lavorare 4 m vivagno, 2 m rov, ripete il diagramma fino a quando non rimangono 4 m , 4 m vivagno. Il diagramma viene ripetuto 5 volte e mezzo (il motivo è formato da 9 m, nel diagramma sono presentate due ripetizioni) . Ci riscriva se ancora in difficoltà. Buon lavoro!

Shirley 29.10.2015 - 19:56:

Hi please help me understand how after i finish A5 which is k2 tog I will end up with 77 stitches. Thank you

DROPS Design 30.10.2015 kl. 09:59:

Dear Shirley, when piece measures 22 cm (or after 1st or 5th row), work as follows from RS: 4 sts as before, A.3 (= K2, K2 tog, K3, K2 tog), then repeat A.4 (= *K2 tog, K2 tog, K3, K2 tog*, repeat from *-* until 15 sts remain on left needle, then work A.5 (= K2 tog, K2 tog, K3, K2 tog, K2), and work the last 4 sts as before = 77 sts. Happy knitting!

Jocelyne 01.03.2015 - 02:02:

Je ne comprends pas le patron de cette écharpe.on commence avec 258 mailles et on finit avec 77 mailles. Merci!

DROPS Design 02.03.2015 kl. 09:03:

Bonjour Jocelyne, on commence effectivement l'écharpe avec 258 m et on diminue comme indiqué pour obtenir 98 m, puis, on augmente 2 m au dernier rang de A.1 (109 m), puis on tricote A.2 et enfin, on tricote A.3, A.4, A.5 (= rang de diminution) pour terminer à 77 m. On tricote une 2ème pièce identique et on les assemble entre elles au niveau des mailles rabattues. Bon tricot!

Katia 21.10.2014 - 13:50:

Perfetto ora tutto torna!! Grazie ancora

Katia 20.10.2014 - 16:52:

Buonasera, sto cercando di realizzare la sciarpa ma mi sono arenata, non mi sono chiari un paio di passaggi: 1. le maglie di vivagno vanno portate avanti per tutta la lunghezza della sciarpa? 2. se il diagramma A1 rappresenta due giri (ferri) l'ultimo ferro non vedo dove comporti aumenti, lo leggo così (a dritto): primo ferro: 2 rov, 1 dir, 1 gettato, 1 dir, 2 rov, 2 dir ultimo ferro: 2 rov, 2 dir, 2 rov, 2 dir in cosa sto sbagliando? Grazie mille per l'aiuto.

DROPS Design 20.10.2014 kl. 21:46:

Buonasera Katia. Sì, bisogna lavorare sempre le 4 m vivagno ai due lati. I diagrammi vengono letti dal basso verso l'alto e da destra verso sinistra. Quindi l'ultimo ferro del diagramma A1 viene lavorato in questo modo, sul diritto: 2 dir, 2 rov, 1 dir, 1 gettato (= aumento), 1 dir, 2 rov. Ci riscriva se ancora in difficoltà. Buon lavoro!

Post a comment to pattern DROPS 142-3

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.