DROPS / 117 / 32

Granny’s Cuddles by DROPS Design

Felted and crochet DROPS slippers made up of squares in ”Snow”.

  • Granny’s Cuddles / DROPS 117-32 - Felted and crochet DROPS slippers made up of squares in ”Snow”.
DROPS design: Pattern no EE-278.

Size: 35/37 - 38/40
3/4 – 5/6½ (Uk sizes)
Foot length: 22/23 – 24/25 cm
Materials: DROPS SNOW
150-200 g colour no 23, tan
100-100 g colour no 47m, light beige mix
50-50 g colour no 01, off-white

To make the squares large enough for the different sizes, use different size crochet hook.
SIZE 35/37:
DROPS CROCHET HOOK size 8 mm – or size needed to get 1 square = 12 x 12 cm.
SIZE 38/40:
DROPS CROCHET HOOK size 10 mm – or size needed to get 1 square = 15 x 15 cm.
NOTE: The squares should be slightly larger rather than slightly smaller.

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

100% Wool
from 1.35 £ /50g
DROPS Snow uni colour DROPS Snow uni colour 1.35 £ /50g
Wool Warehouse Direct Ltd
DROPS Snow mix DROPS Snow mix 1.55 £ /50g
Wool Warehouse Direct Ltd
DROPS Snow print DROPS Snow print 1.70 £ /50g
Wool Warehouse Direct Ltd
needles DROPS Needles & Hooks Order
You can get the yarn to make this pattern from 8.10£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
Crochet 6 ch with off-white and form a ring with 1 sl st in first ch.
ROUND 1 (off-white): 3 ch, 2 tr in ring, * 3 ch, 3 tr *, repeat from *-* a total of 3 times and finish with 3 ch and 1 sl st in 3rd ch from beg of round. Turn piece.
ROUND 2 (light beige mix): 3 ch, 2 tr in first ch-loop, 3 ch, 3 tr in the same ch-loop, * 3 tr in next ch-loop, 3 ch, 3 tr in the same ch-loop *, repeat from *-* a total of 3 times, finish with 1 sl st in 3rd ch from beg of round. Turn piece.
ROUND 3 (tan): 3 ch, 2 tr in first ch-loop, * 3 tr in next ch-loop, 3 ch, 3 tr in the same ch-loop, 3 tr in next ch-loop, *, repeat from *-* a total of 3 times, 3 tr in next ch-loop, 3 ch, 3 tr in the same ch-loop, finish with 1 sl st in 3rd ch from beg of round.
SIZE 35/37: square measures approx 12 x 12 cm.
SIZE 38/40: square measures approx 15 x 15 cm.

Crochet 8 squares for each slipper and sew them tog, edge to edge as shown in fig-1.
Fig-2 shows the slipper after it has been sewn tog – NOTE: by arrows in fig-2 (i.e. in corner mid upper foot and in corner mid back on heel) do not sew tog the ch-loops, i.e. leave a small opening, otherwise it will be difficult to put the slipper on.

Wash slippers in the washing machine with a detergent free of enzymes and optical bleach. Wash at 40 degrees with normal spin, but without pre-wash. After wash form the slipper to the right size whilst still wet and leave to dry. At subsequent washes wash slippers at a wool programme.
NOTE: If the slippers haven’t felted enough, wash them again. If they have felted too much, soak them until thoroughly wet and pull them to desired length.


symbols = Seam 1
symbols = Seam 2
symbols = Seam 3
symbols = Seam 4
symbols = Seam 5
symbols = Seam 6
symbols = Seam 7

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 117-32) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (33)

country flag Linda 03.01.2020 - 11:56:

Noen som vet hvor store lapper man må ha på str. 48/50?

user icon DROPS Design 10.01.2020 kl. 15:52:

Hej Linda, nej denne opskrift er desværre ikke til store fødder, men hvis du klikker på herre, så finder du mange tøfler som er større :)

country flag Marja Jokiniemi 05.03.2018 - 15:28:

Päästääkö lanka väriä eli voinko laittaa yhtaikaa koneeseen kahdet eriväriset tossut?

user icon DROPS Design 07.03.2018 kl. 18:08:

Hei, voit pestä eriväriset tossut yhtaikaa.

country flag Stinne 05.01.2015 - 07:01:

Hvilken str. hæklenål skal man bruge til sko/tøfler str. 44- 46 og hvor store skal ruderne være?

user icon DROPS Design 06.01.2015 kl. 16:55:

Hej Stinne. Det ved jeg desvaerre ikke, men jeg ville nok pröve at haekle en pröve med en större naal - eller haekle en större firkanter, filte den og beregne om den er stor nok til en 44-46

country flag Eva 22.12.2014 - 11:24:

Liebes Drops-Team, ab der 3. Runde ziehen sich meine Granny Squares an den Rändern in die Mitte zusammen. Kann es sein, dass nach den zwei ersten Stäbchen der 3. Runde drei Luftmaschen und dann nochmal drei Stäbchen folgen, so wie in den Runden davor? Dann zieht sich das Viereck nicht mehr zusammen. Ich habe jetzt nur Bedenken, dass die Wolle nicht reicht wenn drei Stb. mehr gehäkelt werden als angegeben... Vielen Dank für eure Hilfe!

user icon DROPS Design 06.03.2015 kl. 12:24:

Liebe Eva, in der 3. Rd müsste der Rhythmus wie zuvor gearbeitet werden, also um jeden Lm-Bogen 3 Stb, 3 Lm und 3 Stb (bzw. am Rd-Anfang wird das 1. Stb durch 3 Lm ersetzt). Die Wolle reicht wie beschrieben.

country flag Elise 30.11.2014 - 16:06:

I've made four pairs of these in different colours and they have proved very popular with my friends. I also struggled with the sewing together of the first pair but then made little paper labels with the letter as per the diagram and pinned them onto the correct edge. Then it was simple! I love felting them in the washing machine - like magic

country flag Helena 07.08.2014 - 18:40:

Jättefina tofflor! Dock räckte det inte med ett nystan av färg nr 1, och då slösade jag inte...:)

Regina Aguiar Arantes 30.07.2014 - 17:26:

Oi, achei linda a pantufa, mas não consigo acertar na montagem, poderia me ajudar? Grata

user icon DROPS Design 02.08.2014 kl. 15:23:

Na receita do modelo, junto à foto, tem um pequeno separador com vídeos que explicam como montar malhas em vídeo. Pode também consultar nossa vasta videoteca com mais de 500 tutoriais de tricô e croché em vídeo.

country flag Cheryl 29.01.2014 - 19:49:

Help!! Please help with sewing together I just cannot follow the diagrams. thank you in advance. Cheryl

user icon DROPS Design 30.01.2014 kl. 10:09:

Dear Cheryl, the video below should help you to sew squares together - the slipper in the video is knitted but the assembly is the same. Happy crocheting!

country flag Isa 21.01.2014 - 23:53:

Ich möchte diese Schuhe gerne in der Größe 41/42 machen. Welche Nadelstärke würden Sie empfehlen und welche Wollmenge werde ich wohl brauchen?

user icon DROPS Design 22.01.2014 kl. 08:15:

Liebe Isa, Sie könnten versuchen, durch vorsichtigeres Filzen eine grössere Grösse zu erhalten.

country flag Bianca Van Dongen 04.01.2014 - 16:35:

Ik had moeite met het in elkaar zetten van de lapjes. Mijn man bedacht om aan elke zijde met dezelfde letter stukjes draad in dezelfde kleur te zetten. Toen was het een simpel klusje!

Post a comment to pattern DROPS 117-32

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.