DROPS Alpaca Party - 13 alpaca yarns on sale all October!

How to knit the short row heel with diagonal shaping of a sock by putting sts on a thread

In his DROPS video we show how you can shape your heel diagonally with short rows on a knitted sock.

Knit stocking sts on heel sts, and at the same time slip 1 st at the end of every row on a strand of yarn or a stitch holder. Continue until there are 3 sts on holders each side and 4 sts left on needle.
Now continue in stocking sts, and at the same time work 1 st from stitch holder back on needle at the end of every row Note: to avoid a hole pick up 2 sts between sts on needle and sts on stitch holder. On next row work these 2 sts and st from holder tog to 1 st.
Continue like this until all sts are back on needle. Work 1 row stocking st on all sts and then continue on all sts on round again.

You must read the pattern to be able to follow. You’ll find patterns where this technique is used by clicking on the pictures below.

Patterns using this technique

DROPS 209-24

DROPS 209-24
DROPS 209-20

DROPS 209-20
DROPS 170-11

DROPS 170-11
DROPS Extra 0-1192

DROPS Extra 0-1192
Change language:

Video #153, listed in: Learn to knit, Socks and Slippers, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Claire wrote:

This video has no audio and that makes it completely useless and unhelpful

09.12.2023 - 06:48

Country flag Blue wrote:

Umständlicher kann man sicher keine Ferse stricken!

24.08.2019 - 09:44

Country flag Karla Maring wrote:

Mooie, duidelijke, uitleg vd video Hartelijk bedankt

21.10.2016 - 20:11

Country flag Karla Maring wrote:

Dit is een kleine sok, werkt dit ook voor een sok voor maat 43 bijvoorbeeld? Ik ben nu als eerste bezig met een sok in één kleur om de techniek vd hakken etc te leren, wil erna dolgraag de sokken in patronen en kleuren leren. Trouwens dit lijkt de meest makkelijke manier om hielen te breien, klopt dat?

21.10.2016 - 20:09

DROPS Design :

Hoi Karla. Je kan dit ook gewoon doen bij andere sokken in een grotere maat - maar je werkt dan natuurlijk met een ander aantal st (zie bijvoorbeeld de patronen onder de video ter inspiratie). Dit is inderdaad een heel eenvoudige manier om hielen te breien, maar of het de makkelijkste manier is, is volgens mij ook een beetje een kwestie van smaak :)

24.10.2016 - 10:34

Sylvialarenas wrote:

Gracias por el video. Por fin se hacer el talón😘

01.05.2016 - 02:14

Country flag Concetta wrote:

Spiegazioni molto dettagliate. Grazie mille!!!!!

28.03.2016 - 21:30

Country flag Marie Danneels wrote:

Al jullie prachtige modellen voor kousen hebben me er toe aangezet om jullie video's aandachtig te bekijken. Ik denk dat het mij wel zal lukken om kousen te breien. Heel mooi aangetoond ten andere, bedankt !

17.06.2012 - 11:13

Griselda wrote:

Felicidades por este video, es muy claro y me ayudó mucho para evitar agujeros en los calcetines. Muchas gracias.

10.05.2012 - 16:32

Country flag Ramona wrote:

Esa talla de calcetin es para adulto o para niño?? Muchas gracias

23.02.2012 - 15:35

Country flag DROPS Design NL wrote:

Alle video's zijn zonder geluid. De video's worden wereldwijd bekeken en niet iedereen begrijpen bijv Engels. Daarom hebben we ook een geschreven instructie bij de video toegevoegd.

02.01.2012 - 12:40

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work a sock with a diamond heel
4:36
How to work a sock with a diamond heel

In this DROPS video we give you a short overview of how to work a sock with a diamond heel. All stitches remain on the needles while knitting the heel. To make the heel, follow these steps: 1. Knit in the round, gradually increasing stitches at the back of the sock until the desired width and length of the heel have been achieved. 2. Decrease the heel stitches while continuing to knit in the round. 3. Continue knitting towards the toe. 4. The combination of increases and decreases forms a diamond-shaped section at the back of the sock, which is why this type of heel is called a diamond heel.
Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to knit with 2 threads to get a stronger heel - knitting tip
5:46
How to knit with 2 threads to get a stronger heel - knitting tip

In this DROPS video we show how to get a stronger heel on a sock by knitting with 2 threads. Use strand inside and outside of ball (or use 2 balls) and work 1 stitch alternately with one and the other strand. This way you get a thicker heel without working with double strand. In the video, we already have knitted the rib and put the stitches mid on top of foot on a stitch holder and we show 2 rows where we knit with 2 strands. These socks are knitted in DROPS Karisma, but in video we use a thicker yarn; DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work a sock with a diagonal heel
3:38
How to work a sock with a diagonal heel

In this DROPS video we show you how to work a heel with a diagonal line from the heel towards the top of the foot This is achieved by working short rows. 1. First you work short rows across the top of the heel, then across the bottom of the heel, finishing by working in the round across all stitches and working towards the toe. 2. The stitches on the top of the foot are placed on a thread/stitch holder and you only work the heel-stitches. Work until there is 1 stitch left on the row. Turn, slip the first stitch on the left needle onto the right needle, tighten the strand and work back. Work like this back and forth, working 1 less stitch on each row and working to the stated stitch-count. 3. Continue back and forth but now working 1 more stitch on each row across the heel stitches. To avoid holes each time you turn, pick up the horisontal strand before the next stitch and place it twisted on the left needle, then work this together with the next stitch on the left needle. Turn, slip the first stitch on the left needle onto the right needle, tighten the strand and work back. Work like this back and forth until you have worked all the heel-stitches. 4. Place the stitches from the thread/stitch holder back onto the needles. 5. Continue in the round to the given length.