DROPS / 161 / 18

Hannah by DROPS Design

Knitted DROPS jumper with lace pattern in ”Kid-Silk”. Size S-XXXL.

DROPS design: Pattern no ks-101
Yarn group A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS KID-SILK from Garnstudio
100-125-125-150-150-175 colour no 08, grey blue

DROPS CIRCULAR NEEDLE (80 cm) SIZE 3.5 mm - or size needed to get 23 sts x 30 rows in stocking st = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (7)

75% Mohair, 25% Silk
from 3.80 £ /25g
DROPS Kid-Silk uni colour DROPS Kid-Silk uni colour 3.80 £ /25g
Wool Warehouse Direct Ltd
Order
DROPS Kid-Silk long print DROPS Kid-Silk long print 3.80 £ /25g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 15.20£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (worked in the round):
1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*.

GARTER ST (back and forth):
K all rows. 1 ridge = 2 rows K.

PATTERN:
See diagrams A.1 to A.4. The diagrams show all rows in pattern seen from RS.
----------------------------------------------------------

JUMPER:
Piece is worked back and forth in parts and sewn tog when finished.

BACK PIECE:
Cast on 163-195-195-227-227-259 sts with Kid-Silk (incl 1 edge st in garter st in each side) on circular needle size 3.5 mm. Work 2 ridges in GARTER ST back and forth - see explanation above! Now work PATTERN as follows from RS: 1 edge st in garter st, A.1 (= 16 sts on 1st row) 10-12-12-14-14-16 times in width, 1 st in stocking st, 1 edge st in garter st. When A.1 has been worked vertically, 103-123-123-143-143-163 sts remain. Continue pattern but now work A.2 over A.1. REMEMBER THE KNITTING TENSION When piece measures 26-27-28-29-30-31 cm from cast-on edge - adjust after one whole repetition vertically, cast on new sts for sleeves at the end of every row in each side as follows: 2 sts 2 times, 4 sts 1 time, 6 sts 3 times and 28-18-23-13-18-8 sts 1 time = 211-211-221-221-231-231 sts. Work the new inc sts in stocking st until there is enough sts for a new repetition of A.2 in width. Now continue pattern as follows from RS: 5 sts in garter st, A.3 0-0-1-1-0-0 times in width, A.2 20-20-20-20-22-22 times in width, A.4 0-0-1-1-0-0 times in width, 1-1-0-0-1-1 st in stocking st, 5 sts in garter st. When piece measures 45-47-49-51-53-55 cm, adjust after a whole repetition vertically, cast off for neck while AT THE SAME TIME working diagonal shoulder:

READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING!
Work the first 88-88-93-93-98-98 sts, cast off the next 35 sts for neck and work the remaining 88-88-93-93-98-98 sts. Then work left shoulder as follows: Continue with pattern as before with 1 edge st in garter st in towards the neck. NOTE: Work sts that do not fit the pattern in stocking st. On next row from neck, dec 1 st by K 2 tog = 87-87-92-92-97-97 sts. AT THE SAME TIME work over sts until 1 repetition remain before the 5 sts in garter st at the edge of sleeve, turn and work back. Continue like this and work 1 repetition less towards the sleeve on every row from RS. When piece measures 48-50-52-54-56-58 cm in total, adjust after a whole repetition, work 1 ridge over all sts. Loosely cast off. Work the other shoulder the same way but reversed.

FRONT PIECE:
Cast on and work as back piece. When piece measures 35-37-39-40-42-44 cm, dec for neck as follows: Work the first 91-91-96-96-101-101 sts, work the next 29 sts in all sizes before slipping them on a stitch holder for neck and work the remaining 91-91-96-96-101-101 sts. Then finish each shoulder separately as follows: Then cast off sts on every row from neck as follows: Cast off 2 sts 2 times = 87-87-92-92-97-97 sts remain for shoulder. When piece measures 45-47-49-51-53-55 cm, work 1 repetition less on every row towards the sleeve the same way as on back piece. When piece measures 48-50-52-54-56-58 cm in total, adjust after a whole repetition and back piece, work 1 ridge over all sts. Loosely cast off. Work the other shoulder the same way.

ASSEMBLY:
Sew the shoulder seams tog. Sew underarm and side seams in one inside 1 edge st.

NECK EDGE:
Pick up from RS approx. 110-120 sts (incl sts on stitch holders) on circular needle size 3.5 mm. Work 2 ridges in GARTER ST in the round - see explanation above, loosely cast off.

Diagram

= K from RS, P from WS
= 1 YO between 2 sts
= slip 1 st as if to K, K 1, psso
= K 2 tog
= slip 1 st as if to K, K 2 tog, psso


Comments (7)

Leave your comment!

Dagmar 13.03.2017 - 20:13:

On some of your diagram descriptions are missing descriptions only empty fields, not only on this one, bit on a lot of other ones as well, I am experienced enough to figure it out, but this pattern is bad Dagmar

DROPS Design 14.03.2017 kl. 10:00:

Dear Dagmar, you will find descriptions to each symbol under diagram text in both US and UK English. In A.1 you are decreasing from row 13, so that you will have less sts after each dec row to finish with 12 sts on last row. Happy knitting!

Diana 16.10.2015 - 10:58:

Hi, my questions are: -what happens with the lost stitches? If I start with pattern A1 I'll lose stitches, also with pattern A2 due to tog. - I started to knit this pattern but the stitches slipped in 3rd row due to loosing 2 stitches in one pattern (starting with 16 in first row and continuing with 14 in the third one). My question is: should I knit 2 side stitches on 3rd row in each repetition?

DROPS Design 16.10.2015 kl. 16:47:

Dear Diana, on first round in A.1 you dec 2 sts in each repeat, so that 1st row in A.1 is worked over 16 sts but row 2 to 12 is worked over 14 sts - then on row 13 you dec 2 sts (= 12 sts in each repeat), and on row 15 you dec 2 sts (= 10 sts in each repeat). After A.1 has been worked in height, 10 sts remain in each repeat = you can work A.2 (= 10 sts) over A.1. Happy knitting!

Irene Holland 27.07.2015 - 15:44:

Hi. What cast on do you recommend for Drops Kid silk jumper?

DROPS Design 27.07.2015 kl. 18:06:

Dear Mrs Holland, you can use the best way you rather cast on your sts or see here different techniques to cast on sts. Happy knitting!

Barbara 19.04.2015 - 02:25:

Hi, just a question about the A2 part of this pattern, should i be allowing one extra stitch at each end of the pattern row, or just starting the pattern as stated, not sure what stitch in the graph i should be finishing with. Thanks Barbara Australia

DROPS Design 20.04.2015 kl. 09:34:

Dear Barbara, work 1st row in A.2 as follows: *K1, YO, K3, slip 1 st as if to K, K 2 tog, psso, K3, YO*. Happy knitting!

Carine 06.02.2015 - 14:43:

Mooi vrouwelijk!

Susanne Johansen 16.12.2014 - 18:55:

Superflot. Florlet og lækker!

Doris 14.12.2014 - 10:58:

Toll, wirkt schön.

Post a comment to pattern DROPS 161-18

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.