DROPS / 151 / 46

Cloud Nine by DROPS Design

Crochet DROPS rug in "Polaris".

DROPS design: Pattern no po-068
Yarn group F
-----------------------------------------------------------
Measurements: approx. diameter 105-125 cm.
Materials:
DROPS POLARIS from Garnstudio
1000-1700 g colour no 07, purple

DROPS CROCHET HOOK SIZE 12 mm – or size needed to get approx. 6 tr = 10 cm in width.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Comments (21)

100% Wool
from 2.85 £ /100g
DROPS Polaris uni colour DROPS Polaris uni colour 2.85 £ /100g
Wool Warehouse Direct Ltd
Order
DROPS Polaris mix DROPS Polaris mix 3.30 £ /100g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 28.50£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
CROCHET INFO 1:
Replace first dc at beg of every dc round with 1 ch. Finish every round with 1 sl st in ch from beg of round.

CROCHET INFO 2:
Replace first tr at beg of every tr round with 3 ch. Finish every round with 1 sl st in 3rd ch from beg of round.

CROCHET TIP:
The rug can be made smaller by stopping after a round with only tr before fan edge is worked.
----------------------------------------------------------

RUG APPROX. 105 CM:
Work 4 ch with Polaris on hook size 12 mm and form a ring with 1 sl st in first ch.
ROUND 1: READ CROCHET INFO 1. Work 10 dc in ch-ring.
ROUND 2: READ CROCHET INFO 2. Work 2 tr in every dc = 20 tr.
ROUND 3: Work * 1 tr in first tr, 2 tr in next tr *, repeat from *-* the entire round = 30 tr.
ROUND 4: Work 1 tr, * 3 ch, skip 1 tr and work 1 tr in next tr *, repeat from *-* the entire round and finish with 3 ch, skip 1 tr and work 1 sl st in first tr at beg of round = 15 ch-spaces on round.
ROUND 5: Work 1 tr in every tr and 2 tr in every ch-space the entire round = 45 tr.
ROUND 6: Work * 1 tr in each of the next 2 tr, 2 tr in next tr *, repeat from *-* the entire round = 60 tr.
ROUND 7: Work 1 tr, * 2 ch, skip 1 tr and work 1 tr in next tr *, repeat from *-* the entire round and finish with 2 ch, skip 1 tr and work 1 sl st in first tr at beg of round = 30 ch-spaces on round.
ROUND 8: Work 1 tr in every tr and 2 tr in every ch-space the entire round = 90 tr.
ROUND 9: Work * 1 tr in each of the next 8 tr, 2 tr in next tr *, repeat from *-* the entire round = 100 tr.
ROUND 10: Work 1 tr, * 2 ch, skip 1 tr and work 1 tr in next tr *, repeat from *-* the entire round and finish with 2 ch, skip 1 tr and work 1 sl st in first tr at beg of round = 50 ch-spaces on round.
ROUND 11: Work * 1 tr in each of the next 9 tr, 2 tr in next tr *, repeat from *-* the entire round – NOTE: Every ch-space from previous round is counted as 1 tr when this round is worked = 110 tr.
ROUND 12: Work * 1 tr in each of the next 10 tr, 2 tr in next tr *, repeat from *-* the entire round = 120 tr.
ROUND 13: Work 1 tr, * 2 ch, skip 1 tr and work 1 tr in next tr *, repeat from *-* the entire round and finish with 2 ch, skip 1 tr and work 1 sl st in first tr at beg of round = 60 ch-spaces on round.
ROUND 14: Work * 1 tr in each of the next 5 tr, 2 tr in next tr *, repeat from *-* the entire round – NOTE: Every ch-space from previous round is counted as 1 tr when this round is worked = 140 tr.
ROUND 15: Work * 1 tr in each of the next 13 tr, 2 tr in next tr *, repeat from *-* the entire round = 150 tr.

FAN EDGE:
Work * 3 tr in first tr, 1 ch, 3 tr in same tr, 2 ch, skip the next 4 tr *, repeat from *-* the entire round and finish with 1 sl st in first tr at beg of round = 30 fans around the edge. Fasten off. Piece now measures approx. 105 cm in diameter.

RUG APPROX. 125 CM:
Work as RUG 105 CM to and with ROUND 15 and continue as follows:
ROUND 16: Work 1 tr, * 2 ch, skip 1 tr and work 1 tr in next tr *, repeat from *-* the entire round and finish with 2 ch, skip 1 tr and work 1 sl st in first tr at beg of round = 75 ch-spaces on round.
ROUND 17: Work * 1 tr in each of the next 9 tr, 2 tr in next tr *, repeat from *-* the entire round – NOTE: Every ch-space from previous round is counted as 1 tr when this round is worked = 165 tr.
ROUND 18: Work * 1 tr in each of the next 10 tr, 2 tr in next tr *, repeat from *-* the entire round = 180 tr.
ROUND 19: Work 1 tr, * 2 ch, skip 1 tr and work 1 tr in next tr *, repeat from *-* the entire round and finish with 2 ch, skip 1 tr and work 1 sl st in first tr at beg of round = 90 ch-spaces on round.
ROUND 20: Work * 1 tr in each of the next 8 tr, 2 tr in next tr *, repeat from *-* the entire round – NOTE: Every ch-space from previous round is counted as 1 tr when this round is worked = 200 tr.
ROUND 21: Work * 1 tr in each of the next 19 tr, 2 tr in next tr *, repeat from *-* the entire round = 210 tr.

FAN EDGE: Work * 3 tr in first tr, 1 ch, 3 tr in same tr, 2 ch, skip the next 4 tr *, repeat from *-* the entire round and finish with 1 sl st in first tr at beg of round = 42 fans around the edge. Fasten off. Piece now measures approx. 125 cm in diameter.

This pattern has been corrected. .

Updated online: 07.11.2016
FAN EDGE:
Work * 3 tr in first tr, 1 ch, 3 tr in same tr, 2 ch, skip the next 4 tr *, repeat from *-*...

Comments (21)

Leave your comment!

Aurélia 28.01.2019 - 16:09:

Après vérification je me suis trompée : c’est bien 6 brides dans la même maille :) oops désolé

Aurélia 28.01.2019 - 16:02:

Bonjour merci pour le modèle mais il semblerait que les corrections apportées à la fin pour la bordure éventail soit toujours erronée. A mon avis il faut faire 3 brides dans une maille - 1 maille - puis 3 brides dans la maille à côté - 2 mailles on saute 4 brides et on recommence car 6 brides dans une maille me semble trop serré mais je débute, peut être ai je tort. Merci en tout cas.

EILEEN 28.05.2018 - 03:12:

Hi from Ireland .May i say a big thank you for this wonderful pattern and in uk terms . I shall be making the rug from t-shirt yarn with a big size 15 hook. This shall be my first rug i have ever made as this is why i came across your FAB pattern ..... So Thank you ...

Irina Lech 24.05.2018 - 13:42:

Hallo, haben Sie zu der Anleitung auch eine Fortsetzung?

DROPS Design 24.05.2018 kl. 15:15:

Liebe Frau Lech, der Teppich kann bis Runde 15 (= Teppich 105 cm) oder bis Runde 21 (= Teppich 125 cm) + Muschelkante. Viel Spaß beim häkeln!

Eilen 26.03.2018 - 07:04:

Hvis man ønsker teppet litt større? Hva gjør man da etter omg 21. 😊

Marjolijn 21.09.2016 - 16:26:

Tussen toer 10 en 11 mist volgens mij een toer... In toer 10 haak je stk,2l,sla 1 over en 1stk in volgende stk. Toer 11 moet je 9stk haken in de stk van vorige toer maar daar heb je l en geen stk.... Klopt niet helemaal volgens mij 😳

Tarah Matson 29.09.2015 - 01:27:

Just wanted to let you know that you forgot to put the ch2 step in the edge. It should read: *3 DC, CH1, 3DC in same stitch, CH2, skip the next 4DC*. Thank you so much for such great patterns! I also made "Biscuit" and am loving it!!!!

Ulrike Müller 15.10.2014 - 13:43:

Ich finde die gezeichneten Anleitungen einfach besser. Das Modell ist schön. Vielleicht nicht in der Farbe.

Carine Bex 10.04.2014 - 21:37:

Beste, Graag zou ik deze mat nog een aantal rondjes groter maken. Kunnen jullie me vertellen hoe de stekenverhoudingen dan zijn? Vr gr, Carine

DROPS Design 11.04.2014 kl. 09:44:

Hoi Carine. Ik kan je helaas niet helpen met uitschrijven van het patroon bij individuele aanpassingen.

Tinie 07.02.2014 - 21:29:

Prachtig kleed, maar hoe verder als je hem nog groter dan 125cm wilt maken?

DROPS Design 12.02.2014 kl. 14:00:

Hoi Tinie. Je moet dan doorgaan zoals eerder maar met meer stk tussen elke meerdering.

Post a comment to pattern DROPS 151-46

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.