DROPS / 145 / 17

Sweet Harlequin by DROPS Design

Knitted DROPS jumper with lace pattern and round yoke in ”BabyAlpaca Silk”. Size: S - XXXL.

DROPS design: Pattern no bs-042
Yarn group A
-----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL

Materials: DROPS BABYALPACA SILK from Garnstudio
350-350-400-450-450-500 g colour no 7402, light sea green

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 and 80 cm) SIZE 3 mm - or size needed to get 24 sts x 32 rows in stocking st = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

70% Alpaca, 30% Silk
from 4.10 £ /50g
DROPS BabyAlpaca Silk uni colour DROPS BabyAlpaca Silk uni colour 4.10 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 28.70£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (in the round on circular needle):
* K 1 round and P 1 round *, repeat from *-*. 1 ridge = 2 rounds.

PATTERN:
See diagrams A.1 to A.5. Diagrams show the pattern seen from RS.
--------------------------------------------------------

BODY:
Worked in the round on circular needle. Cast on 190-212-232-256-284-314 sts on circular needle size 3 mm with BabyAlpaca Silk. Insert 2 markers in piece, one marker after 95-106-116-128-142-157 sts and one marker after last st on round (= mid of each side). Work 4 ridges in GARTER ST - see explanation above. Continue in stocking st. REMEMBER THE KNITTING TENSION! When piece measures 7 cm, dec 1 st on each side of both markers (i.e. work 2 sts tog). Repeat dec every 3 cm 3 more times (4 dec in total) = 174-196-216-240-268-298 sts. Continue in stocking st. When piece measures 22 cm, inc 1 st on each side of both markers by K 2 sts in the st before and after the marker. Repeat inc every 3½-4-4-4½-4½-5 cm 3 more times (4 inc in total) = 190-212-232-256-284-314 sts. When piece measures 36-38-37-39-39-41 cm, cast off the middle 8 sts each side for armholes (i.e. cast off 4 sts each side of markers) = 174-196-216-240-268-298 sts remain on needle. Put piece aside and knit the sleeves.

SLEEVE:
Worked in the round on double pointed needles. Cast on 55-56-60-62-64-69 sts on double pointed needles size 3 mm with BabyAlpaca Silk. Work 4 ridges in GARTER ST. Insert 1 marker at beg of round (= mid under sleeve). Continue in stocking st. When piece measures 8-8-6-6-8-8 cm, inc 1 st on each side of marker by working 2 sts in the st before and after the marker. Repeat inc every 2½-2½-2-2-1½-1½ cm 13-13-18-17-21-20 more times (14-14-19-18-22-21 inc in total) = 83-84-98-98-108-111 sts. When piece measures 46-46-44-44-43-43 cm, cast off 8 sts mid under sleeve (i.e. cast off 4 sts each side of marker) = 75-76-90-90-100-103 sts remain on needle. Put piece aside and knit another sleeve.

YOKE:
K 1 round on body while AT THE SAME TIME working the sleeves on to needle = 324-348-396-420-468-504 sts. Then work A.1 over all sts (27-29-33-35-39-42 repetitions). When A.1 has been worked one time vertically, there are 270-290-330-350-390-420 sts on round. Continue with A.2 over all sts (27-29-33-35-39-42 repetitions). When A.2 has been worked one time vertically, there are 216-232-264-280-312-336 sts on round. Continue with A.3 over all sts (27-29-33-35-39-42 repetitions). When A.3 has been worked one time vertically, there are 162-174-198-210-234-252 sts on round. Then work A.4 over all sts (27-29-33-35-39-42 repetitions). Work A.4 a total of 1-1-2-2-3-3 times vertically, then work A.5 over all sts. When A.5 has been worked one time vertically, there are 108-116-132-140-156-168 sts on round. K 1 round from RS while AT THE SAME TIME dec 4-8-20-24-36-44 sts evenly = 104-108-112-116-120-124 sts. Now work an elevation in the back of neck. K all rows. Work as follows from mid front: Work 62-64-66-68-70-72 sts, turn and work 20 sts back. Turn and work 30 sts. Turn and work 40 sts. Turn and work 50 sts. Turn and work 60 sts. Turn and work 70 sts. Turn and work 80 sts. Turn and work over all sts on round until mid front. Then work 3 ridges in garter st over all sts. Cast off.

ASSEMBLY:
Sew the openings under the sleeves.

Diagram

= K from RS
= K 2 tog
= slip 1 st as if to K, K 1, psso
= 1 YO between 2 sts
= slip 1 st as if to K, K 2 tog, psso
= this st has been dec

Francine Guimond 14.02.2019 - 18:42:

Que veux dire « tricoter une re-hausse » pour l’encolure du dos?

DROPS Design 15.02.2019 kl. 08:44:

Bonjour Mme Guimond, une réhausse consiste à tricoter quelques rangs raccourcis sur les mailles du dos de l'ouvrage pour que l'encolure dos et devant soient différentes. La vidéo ci-dessous vous montre un exemple de réalisation. Bon tricot!

Tove Larsen 03.04.2018 - 22:30:

Hei. Jeg har begynt på mønster på denne modellen. Det skal bli mindre masker på pinnen etter hver omgang. Jeg forstår det slik at jeg skal ta et kast - 1m løs av,1 rett og løfte den løse masken over. Da omgangen er slutt har jeg jo like mange masker på pinnen. Hva gjør jeg galt? Trenger hjelp.

DROPS Design 04.04.2018 kl. 14:03:

Hej Tove, det er øverst i diagrammerne du begynder at tage ind. Du kan se de små sorte trekanter (som betyder at du tager 2 masker ind) hvor du ikke har et omslag på samme pind. Her tager du ind :)

Guichard 31.01.2017 - 12:02:

Regarder dans les commentaires je pose deux fois la question et ca le let dans les commentaires je n'arrive pas à placer le motif A1 sur les manches 90 n'est pas divisible par 12....je peux juste les placer sur dos et devant qui font chacun 108 mailles divisibles par 12 le nombre de pailles du motif A1... Merci m aider

Guichard 31.01.2017 - 11:55:

Je tricote taille L et probleme : au moment où on rassemble dos devant et manche pour tricoter A1, je n'arrive pas à disposer les motifs sur les manches. Dos et devant ont chacun 108 mailles donc 108/12 font 33 motifs mais pour les manches 90/12 ça fait Pas un compte rond...comment faire ? Regarder dans les commentaires j'ai un peu plus détaillé espérons que vous pourrez m'aider je suis bloquée. Merci

DROPS Design 31.01.2017 kl. 13:15:

Bonjour Mme Guichard, on tricote les 33 motifs de A.1 sur les 396 mailles, soit 33x12= 396, les motifs ne sont pas centrés sur chaque pièce. Bon tricot!

Guichard 31.01.2017 - 10:48:

Je tricote taille L et probleme :au moment où on rassemble dos,devant et manches pour commencer A1, vous annoncez 33 fois le diagramme. Pour moi ça ferait 66 motifs (33 sur le dos 33 sur le devant) Car on a 108 m sur le devant , autant sur le dos doit donc 108/12 = 33 motifs (12 étant le nb de mailles d'un motif) et sur les manches j'ai 90 mailles....pas divisibles par 12....donc je n'arrive pas à positionner mes motifs A1sur les manches.

Linda 01.10.2016 - 19:04:

Buongiorno non ho capito come lavorare la "cresta" a maglia legaccio, è composta da 2 giri uno a diritto e uno a rovescio? O come nelle spiegazioni devo fare due giri a diritto e due a rovescio? Grazie.

DROPS Design 01.10.2016 kl. 19:14:

Buongiorno Linda. La cresta a legaccio è formata da 2 giri, uno a dir e uno a rov. Abbiamo corretto il testo. Buon lavoro!

Sara 21.08.2016 - 18:54:

Salve scusate ancora la mia domanda di prima era riferita infatti alla lavorazione delle maniche che mi piacerebbe lavorare con i ferri a doppia punta...quale lunghezza devo usare? Scusate ancora grazie mille per la risposta

DROPS Design 21.08.2016 kl. 19:48:

Buonasera Sara, generalmente i ferri a doppia punta sono lunghi 20 cm, ma esistono anche da 15 e da 10 cm, soprattutto nei calibri più piccoli. Buon lavoro!

Sara 21.08.2016 - 17:24:

Salve scusate ancora la mia domanda di prima era riferita infatti alla lavorazione delle maniche che mi piacerebbe lavorare con i ferri a doppia punta...quale lunghezza devo usare? Scusate ancora grazie mille per la risposta

DROPS Design 21.08.2016 kl. 18:20:

Buonasera Sara. Generalmente per le maniche si usano i ferri a doppia punta lunghi 20 cm. Buon lavoro!

Sara 21.08.2016 - 17:21:

Salve io ho un dubbio sulla misura dei ferri a doppia punta da usare, come mi oriento?

DROPS Design 21.08.2016 kl. 18:22:

Buonasera Sara. Generalmente i ferri a doppia punta sono lunghi 20 cm l'uno. Buon lavoro!

Sara 21.08.2016 - 10:44:

Salve io ho un dubbio sulla misura dei ferri a doppia punta da usare, come mi oriento?

DROPS Design 21.08.2016 kl. 13:49:

Buongiorno Sara. Vengono suggeriti i ferri n.3 sia circolari che a doppia punta (lunghi di solito 20 cm). La misura deve quindi essere la stessa dei ferri usati per il davanti/dietro. Se preferisce può lavorare le maniche con i ferri circolari con cavo corto o usando la tecnica del magic loop. Buon lavoro!

Post a comment to pattern DROPS 145-17

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.