DROPS / 146 / 14

Cassiopeia by DROPS Design

Crochet DROPS necklace in "Cotton Viscose".

Tags: circle, jewellery,

DROPS design: Pattern no n-150
Yarn group A
-----------------------------------------------------------
Measurements: Large circle: 8 cm in diameter. Small circle: 5 cm in diameter.
Materials:
DROPS COTTON VISCOSE from Garnstudio
50 g colour no 02, off white

DROPS CROCHET HOOK SIZE 3 mm – or size needed to get a small circle = 5 cm in diameter.

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (36)

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
FLOWER:
Work 5 ch and form a ring with 1 sl st in 1st ch - see diagram A.1.
ROW 1: Work 2 ch (replace 1st htr). Then work 9 htr in ch-ring = 10 htr.
Then work back and forth as follows: 1 ch, 1 sl st in first htr, 9 ch, 1 sl st in same htr, * 1 sl st in each of the next 2 htr, 9 ch, 1 sl st in same htr *, repeat from *-* 3 more times (=5 ch-loops). Work 2 ch (replace first htr). In ch-loop work 3 htr, 2 tr, 2 dtr, 2 tr, 4 htr, 1 sl st in next sl st from previous round. See diagram A.2.
In the next 4 ch-loops work as follows: 4 htr, 2 tr, 2 dtr, 2 tr, 4 htr, 1 sl st in next sl st from previous round = 5 leaves.

PATTERN:
See diagram A.1-5.
----------------------------------------------------------

NECKLACE:
First work the middle circle on necklace, then work the circles in the sides.
LARGE CIRCLE:
Work 12 ch on hook size 3 mm and form a ring with 1 sl st in first ch - see diagram A.5.
ROUND 1: Work 2 ch (replace 1st htr), 19 htr in ch-ring = 20 htr. Finish with 1 sl st in 2nd ch.
ROUND 2: Work 3 ch (replace 1st tr), 1 tr in 1st htr, 2 tr in every htr on round = 40 tr on round. Finish with 1 sl st in 3rd ch.
ROUND 3: Work 4 ch (replace 1st dtr), 1 dtr in 1st tr, * 1 dtr in next tr, 2 dtr in next tr *, repeat from *-* the entire round (work 3 dtr over 2 tr) = 60 dtr on round. Finish with 1 sl st in 4th ch.

Then work as follows: In 1st dtr work FLOWER - see explanation above. After last row on flower continue to work around the large circle with WS towards you as follows: Work 1 sl st LOOSELY in back loop of each of the next 10 dtr, 9 ch, 1 sl st LOOSELY in back loop of same dtr as last sl st. Turn piece and work from RS in ch-loop as follows: 4 htr, 2 tr, 2 dtr, 2 tr, 4 htr - see diagram A.2. Then work 1 sl st LOOSELY in back loop of each of the next 20 dtr. Work FLOWER - see explanation above. After last row on flower continue to work around the circle with WS towards you as follows: Work 1 sl st LOOSELY in back loop of each of the next 20 dtr, 9 ch, 1 sl st LOOSELY in back loop of same dtr as last sl st. Turn piece and work from RS in ch-loop as follows: 4 htr, 2 tr, 2 dtr, 2 tr, 4 htr - see diagram A.2. Then work with WS towards you as follows: 1 sl st LOOSELY in back loop of each of the next dtr. Cut and fasten the thread.

SMALL CIRCLE NO 1 (LEFT SIDE):
Work 12 ch on hook size 3 mm and form a ring with 1 sl st in first ch.
ROUND 1: Work 2 ch (replace 1st htr), 19 htr in ch-ring = 20 htr.
Finish with 1 sl st in 2nd ch - see diagram A.3.
ROUND 2: Work 4 ch (replace 1st dtr), 1 dtr in 1st htr, 2 dtr in each of the next 6 htr. Then fasten circle to the large circle as follows: Work 1 sl st between dtr on leaf on the left side of the large circle. Work 2 dtr in each of the next 3 htr on small circle, 1 sl st between dtr on 1st leaf on flower. Work 2 dtr in each of the next 3 htr on small circle, 1 sl st between dtr on 2nd leaf on flower.
2 dtr in each of the next htr on small circle = 40 dtr. Finish with 1 sl st in 4th ch.
Then work back and forth as follows:
ROW 1: Work * 1 ch, 1 dc in next dtr, 6 ch, 1 sl st in same dc *, repeat from *-* 3 more times (= 4 times in total) = 4 leaves.
See diagram A.4.
ROW 2: Work as follows in first ch-loop: 2 ch (replace first htr), 3 htr, 2 tr, 4 htr, 1 sl st in ch from previous row. In the next 3 ch-loops work as follows: 4 htr, 2 tr, 4 htr, 1 sl st in ch from previous row = 4 leaves. Cut and fasten the thread.

SMALL CIRCLE NO 2 (LEFT SIDE):
Work as small circle no 1 but work 2nd round as follows:
Work 4 ch (replace 1st dtr), 1 dtr in 1st htr, 2 dtr in each of the next 8 htr. Then fasten small circle no 1 and 2 tog as follows: Work 1 sl st between tr on 2nd leaf on small circle no 1. Work 2 dtr in each of the next 3 htr on circle no 2, 1 sl st between tr on 1st leaf on small circle no 1. Work 2 dtr in each of the next htr on no 2 = 40 dtr. Finish with 1 sl st in 4th ch. Then work as small circle no 1.

SMALL CIRCLE NO 3 (RIGHT SIDE):
Work as small circle no 1 but work 2nd round as follows:
Work 4 ch (replace 1st dtr), 1 dtr in 1st htr, 2 dtr in each of the next 8 htr. Then fasten the circle to large circle as follows: Work 1 sl st between dtr on 4th leaf on flower. Work 2 dtr in each of the next 3 htr on small circle, 1 sl st between dtr on 5th leaf on flower. Work 2 dtr in each of the next 3 htr on small circle, 1 sl st between dtr in leaf on the right side of the large circle.
2 dtr in each of the next htr on small circle = 40 dtr. Finish with 1 sl st in 4th ch. Then work as small circle no 1.

SMALL CIRCLE NO 4 (RIGHT SIDE):
Work as small circle no 1 but work 2nd round as follows:
Work 4 ch (replace 1st dtr), 1 dtr in 1st htr, 2 dtr in each of the next 10 htr. Then fasten the circle to small circle no 3 as follows: Work 1 sl st between tr on 4th leaf on small circle no 3. Work 2 dtr in each of the next 3 htr on small circle no 4, 1 sl st between tr on 3rd leaf on small circle no 3. Work 2 dtr in each of the next htr on small circle no 4 = 40 dtr. Finish with 1 sl st in 4th ch. Then work as small circle no 1.

CHAIN:
Work a chain of approx. 36 cm with ch in both sides. Beg with 1 sl st through outer edge on leaf towards mid front on circle no 2 and 4. Cut and fasten the thread.

Diagram

= dc
= ch
= sl st
= htr
= tr
= dtr

Comments (36)

Leave your comment!

Lala 28.04.2014 - 15:20:

Bonjour, j'essaye de faire ce modèle et cela fait 3 fois que je recommence car mon premier cercle gondole et pourtant j'ai bien suivi les explications. Aurait-il pas un erreur dans les explications ?

DROPS Design 28.04.2014 kl. 16:02:

Bonjour Lala, avez-vous pensé à essayer de commencer par un rond magique ? cf vidéo ci-dessous. Bon crochet!

Anteide 04.05.2013 - 17:31:

Hat mir Spaß gemacht. Allerdings habe ich den hinteren Teil auch noch etwas attraktiver gemacht, drei Reihen und noch 3 kleine Rosetten.

Lea 03.02.2013 - 18:33:

Andekas lahendus kaelusele.

Ljubica 25.01.2013 - 01:07:

Beautiful

May 17.01.2013 - 16:58:

Super mooi, en nog leuker om te maken.

Elena 15.01.2013 - 16:14:

Muy original

Candau 13.01.2013 - 13:00:

Modele très original mais quelques pointes de couleur vives auraient sublime ce modele

Hoferlin 13.01.2013 - 06:19:

Super beau a retenir

Inger Alderblad 05.01.2013 - 23:06:

Kul att se ett vackert halsmycke

Mpze 03.01.2013 - 01:52:

Bijoux de peau

Post a comment to pattern DROPS 146-14

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.