DROPS Baby Merino
DROPS Baby Merino
100% Wool
from 3.50 £ /50g
Get the yarn to make this pattern from 35.00£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Hipp Hipp Hurra Trousers

Knitted trousers for babies and children in DROPS BabyMerino. The piece is worked top down, with Nordic pattern. Sizes 6 months – 6 years.

DROPS Children 44-4
DROPS Design: Pattern bm-034-bn
Yarn group A
-----------------------------------------------------------

SIZES: 6/9 - 12/18 months (2 - 3/4 - 5/6) years
Child’s height in cm:
68/74 - 80/86 (92 - 98/104 - 110/116)

MATERIALS:
DROPS BABY MERINO from Garnstudio (belongs to yarn group A)
150-150 (200-200-200) g colour 21, black
50-50 (50-50-50) g colour 11, ice blue
50-50 (50-50-50) g colour 19, grey
50-50 (50-50-50) g colour 20, dark grey
50-50 (50-50-50) g colour 25, lavender
50-50 (50-50-50) g colour 43, light sea green
50-50 (50-50-50) g colour 45, lemon
50-50 (50-50-50) g colour 47, north sea

To work the piece in one colour you will need:
200-200 (250-250-250) g

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 3.5 MM: Length 40 cm.
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM.

KNITTING TENSION:
24 stitches in width and 32 rows in height with stocking stitch = 10 x 10 cm.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Baby Merino
DROPS Baby Merino
100% Wool
from 3.50 £ /50g
Get the yarn to make this pattern from 35.00£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

PATTERN:
See diagrams A.1 to A.3. The diagrams show all rows in the pattern from the right side. The pattern is worked in stocking stitch.

RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge = knit 2 rows.




INCREASE TIP:
Increase 1 stitch by making 1 yarn over. On the next round knit the yarn overs twisted to avoid holes.

DECREASE TIP (inside leg):
Start 2 stitches before the marker, knit 2 together, slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch.


-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

TROUSERS - SHORT OVERVIEW OF THE PIECE:
The piece is worked with pattern, in the round and top down and with a lining for the belt. The piece is divided and each leg finished separately. A patterned cuff and lining are worked at the bottom of each leg. Braces are worked back and forth and sewn on.

LINING (for belt):
Cast on 108-120 (132-144-156) stitches with circular needle size 3.5 mm and colour dark grey. Work stocking stitch in the round for 10 cm. Work the next round as follows: * Knit 2 together, 1 yarn over *, work from *-* over all stitches (folding-edge). The yarn overs are not worked twisted on the next round. REMEMBER THE KNITTING TENSION!

BELT:
Work A.1 over all stitches. When A.1 has been completed in height, the belt is approx. 11 cm and the piece measures 22 cm (including the lining).

TROUSERS:
THE PIECE IS NOW MEASURED FROM HERE!
Continue with stocking stitch and colour black.
Knit 1 round and increase 26-24 (22-20-16) stitches evenly spaced = 134-144 (154-164-172) stitches.

ELEVATION AT THE BACK:
To give a better fit, work an elevation mid-back.
Work stocking stitch back and forth. Start mid-back and knit 6-7 (7-8-8) stitches, turn (to avoid a hole, slip the first stitch and tighten the strand). Purl 12-14 (14-16-16), turn. Knit 18-21 (21-24-24), turn. Purl 24-28 (28-32-32), turn. Continue working 6-7 (7-8-8) more stitches each time you turn, 6 more times (10 short rows). Continue with stocking stitch in the round.
When you have worked 10-13 (18-20-22) cm with black, measured from the belt mid-front (there is 5 cm left before dividing for the legs), insert 1 marker at the beginning of the round and 1 marker after 67-72 (77-82-86) stitches (mid-front and mid-back). Then increase 1 stitch on each side of both markers - read INCREASE TIP, every 2nd round 8 times = 166-176 (186-196-204) stitches. The piece now measures approx. 15-18 (23-25-27) cm measured mid-front, a total of 37-40 (45-47-49) cm with the lining. Cast off 3 stitches on each side of both markers (6 stitches mid-front and mid-back). The legs are finished separately.

LEGS:
THE PIECE IS NOW MEASURED FROM HERE!
Start mid-back and knit the first 77-82 (87-92-96) stitches, then place the remaining stitches on a thread. Change to double pointed needles size 3.5 mm and work stocking stitch in the round. Insert 1 marker at the beginning of the round (inside leg).
When the leg measures 2 cm, decrease 1 stitch on each side of the marker, only in the 4 smallest sizes (do not decrease in size 5/6 years) - read DECREASE TIP. Decrease like this every 6th round a total of 2-1 (3-2-0) times = 73-80 (81-88-96) stitches. On the next round decrease 1-0 (1-0-0) stitch = 72-80 (80-88-96) stitches.
When the leg measures 4-6 (9-10-14) cm, work the next round as follows: * Knit 2, knit 2 together *, work from *-* over all stitches = 54-60 (60-66-72) stitches. Work A.2 over all stitches.
When A.2 has been completed in height, the leg measures 10-12 (15-16-20) cm.

LINING (for leg):
Work the lining with colour dark grey as follows:
* Knit 2 together, 1 yarn over *, work from *-* over all stitches (folding-edge). THE PIECE IS NOW MEASURED FROM HERE!
Then work stocking stitch for the lining (the yarn overs are not knitted twisted). The first round is worked with colour dark grey, then change to colour black and work a further 6 cm. Cast off. Work the other leg in the same way.

ASSEMBLY:
Fold the lining at the top of the trousers to the wrong side and sew down with colour black, sewing to the black row on the belt. If the lining is too short or too long, adjust the colour of the strand to the colour of the row the lining will be sewn to.
Do the same at the bottom of each leg.

BRACES:
The braces are approx. 30-34 (38-38-42) cm in length, with 5 cm extra on each side to adjust as the child grows. Cast on less/more stitches if you want shorter/longer braces (the number of stitches should be divisible by 4 + 2).
Cast on 74-82 (90-90-98) stitches with circular needle size 3.5 mm and colour black. Work 6 rows of stocking stitch back and forth, with 1 edge stitch in GARTER STITCH – read description above, on each side.
Work the next row from the right side as follows: 1 edge stitch in garter stitch, * knit 2 together, 1 yarn over *, work from *-* until there is 1 stitch left and 1 edge stitch in garter stitch (folding-edge). Continue with A.3 and 1 edge stitch in garter stitch on each side (the edge stitches are worked in the same colour as the first/last stitch in A.3 – yarn overs not worked twisted). The first row in A.3 is from the wrong side. When A.3 has been completed in height, work a folding edge from the wrong side with black as follows: 1 edge stitch in garter stitch, * purl 2 together, 1 yarn over *, work from *-* until there is 1 stitch left and 1 edge stitch in garter stitch. Work 6 rows with black (yarn overs not worked twisted), fold the edges down to make sure they are not tight; work extra rows if necessary. Cast off. Sew the cast-on and cast-off edges together in the outermost loop of the outermost stitch. Work the second brace in the same way.

ASSEMBLY:
Sew the braces neatly to the top lining (i.e. to the wrong side of the belt) approx. 5 cm down on each side, with 8-8 (9-10-10) cm between the braces mid-front and mid-back.
Sew together the 6 cast-off stitches between the legs.

This pattern has been corrected.

Updated online: 06.01.2023
LEGS:... When the leg measures 4-6 (9-10-14) cm, work the next round as follows: * Knit 2, knit 2 together *, work from *-* over all stitches...

Diagram

symbols = dark grey
symbols = black
symbols = light sea green
symbols = ice blue
symbols = lemon
symbols = north sea
symbols = lavender
symbols = grey
symbols = knitting direction
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Children 44-4

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.