Bente Sundsdal ha scritto:
Hei, ang. M.1: hvordan kan man starte og avslutte en rad med en luftmaske, d går rett og slett ikke.. eller skal man trekke disse luftmaskene ut med hempene til slutt… veldig fin topp men jeg forstår ingenting av start og avslutning på M1. Håper på en oppklaring for jeg har lyst å hekle denne :)
10.02.2024 - 10:16DROPS Design ha risposto:
Hej Bente, jo, du har 2 luftmasker imellem hver st på hele 2. række i M.1
22.02.2024 - 11:00
Kathy Dean ha scritto:
Thank you for taking the time to reply. Forgive my long winded question. After deciding "never to give up", I worked the pattern from the picture of the top instead of the chart. Not sure why this chart got me confused. Nevertheless, I thank you for these beautiful patterns that are freely available. A challenge is always good. Wishing you everything of the best.
31.10.2023 - 12:53
Kathy Dean ha scritto:
Dear Drops team. Does 17 on chart M1 represent 17 rounds? I count only 16? Should there be 5 rounds (with filet blocks to form bottom part of diamond and to the middle of the diamond shape ) and not 4? When I count the rows/rounds of the filet blocks in the picture of the top, I count five (that round has the 3 filet block repeat) middle /bottom half of diamond. Count the chart from (R) 5 - 8 (3 filet block rep) that is only 4? Please correct me if I'm wrong. Thank you
28.10.2023 - 07:20DROPS Design ha risposto:
Dear Mrs Dean, diagram M.1 should be 16 rows, the number has now been edited, thanks for noticing. Read every row from RS from the right towards the left and every row from WS from the left towards the right. Then sorry, I don't understand your question, could you try to reword? Thanks for your comprehension.
30.10.2023 - 15:50
Kathy Dean ha scritto:
Thanks for replying. Do you repeat the 24 stitches for each round for M 1? Our wool supplier does not offer such a service. Thank you
27.10.2023 - 14:11DROPS Design ha risposto:
Dear Mrs Dean, when working M.1 you work in rows, not in the round, and repeat the 24 sts of diagram over the 168 sts (7 times in total in width). From RS read diagram from the right towards the left (starting on bottom corner on the right side) and from WS read diagram from the left towards the right. Happy knitting!
28.10.2023 - 08:37
Kathy Dean ha scritto:
Please I need help. I am working the M. 1 = 24, have got to row 8,it is not working out right. I have worked from charts before but this one has got me confused. I have just been repeating the pattern for each row, can't figure out what has gone wrong. Making this for a gift. Would appreciate your help. I have gone to your chart section but it doesn't help. Thank you.
26.10.2023 - 22:16DROPS Design ha risposto:
Dear Mrs Dean, tricky to find any mistake without seing your project, maybe add markers between each repeat can help to keep tracking on each row. Show your work to your store (maybe even per mail), can also help to find together with you where it went wrong. Happy crocheting!
27.10.2023 - 09:20
Krista ha scritto:
How do I start and end a row with a chain? It occurs in multiple rows through out the pattern but I don’t understand how to make this work. Please help me. I’ve tried to check through the other comments, I’m sorry if I missed it but I can’t find the answer.
24.08.2023 - 22:07DROPS Design ha risposto:
Dear Krista, you replace 1 sc with 1 chain and 1 dc with 2 chains at the beginning of every row. When the row start with 1 chain, crochet 2 chain to replace first stitch and then continue diagram with 2nd stitch in diagram, and finish with 1 dc in last stitch. Happy crocheting!
25.08.2023 - 08:24
Julia ha scritto:
Danke liebes Team für die Antwort, bei der Anleitung hat M2 aber keine 36 M sondern nur 20M, wo finde ich die anderen 16? Bitte um weitere Hilfe
07.08.2023 - 21:48DROPS Design ha risposto:
Liebe Julia, die restlichen 16 Maschen häkeln Sie genau wie die ersten 20 Maschen, das Muster einfach so über die ersten/letzten 36 Maschen häkeln. Viel Spaß beim häkeln!
08.08.2023 - 09:16
Julia ha scritto:
Ich habe M1 gehäkelt, M2 und M3 auch ( Größe s), M4 geht sich aber nicht aus , habe immer 20 Maschen zuviel, häkle es bereits das 2x, es wird aber nichts anders
05.08.2023 - 21:08DROPS Design ha risposto:
Liebe Julia, in S sind es 172 Maschen und so häkeln Sie die Diagramme: 36 Maschen M.2 + 24 Maschen M.3 + 52 Maschen M.4 + 24 Maschen M.3 + 36 Maschen M.2 = 36+24+52+24+36=172. Viel Spaß beim häkeln!
07.08.2023 - 10:01
Esme ha scritto:
I am getting to the top of pattern 4 where the three squares join but I have 5 stitches not 4 so the middle square is wider. I\'ve undone and redone this several times. I\'m definitely working with 196 stitches but just can\'t calculate where this additional stitch comes from. Please can you help? Thanks
31.07.2023 - 23:38
Broeckhoven Gonda ha scritto:
Ik weet het begin n iet van patroon 1. groetjes,
24.06.2023 - 12:51DROPS Design ha risposto:
Dag Gonda,
Je leest het patroon van onder naar boven en je begint de eerste naald rechts onderaan. Je haakt naar links en dan lees je op de volgende toer het patroon weer terug van links naar rechts. En zo ga je steeds verder.
25.06.2023 - 18:00
Sidney |
|||||||||||||
![]() |
![]() |
||||||||||||
Top all’uncinetto DROPS in "Safran"
DROPS 69-1 |
|||||||||||||
CAMPIONE: 24 m.a x 12 righe con l’uncinetto n° 3 = 10 x 10 cm. Motivo: ved. diagramma - M.1, M.2, M.3 e M.4. Diagramma M.1 e M.2 = 1 ripetizione. Lavorare il M.3 e il M.4 come dimostrano le taglie indicate nei diagrammi. Suggerimento uncinetto: Per girare il lavoro, lavorare così: 2 cat sostituiscono 1 m.a e 1 cat sostituisce 1 m.b. Top: Con l’uncinetto n° 3 e il filato Safran, lavorare una catena di 169-193-217 cat (incl 1 cat per girare). Continuare con M.1 - vedere Suggerimento uncinetto = 168-192-216 m. RICORDARSI DELLA TENSIONE DELLA MAGLIA! Dopo M.1, continuare con m.a - allo stesso tempo: Taglia S e M: aumentare 4 m in modo uniforme sulla 1° riga dopo M.1. Taglia L: diminuire 2 m in modo uniforme sulla 1° riga dopo M.1 = 172-196-214 m. Dopo 22-24-25 righe (incl M.1) in altezza, il lavoro misura ca 18-20-21 cm. Continuare così: Lavorare M.2 - iniziare in basso sinistra del diagramma e lavorare verso la destra - sopra 36-42-48 m, M.3: cominciare in basso sinistra del diagramma e lavorare verso destra - sopra le seguenti 24-30-33 m, M.4 = 52-52-52 m, M.3 cominciare in basso destra del diagramma alla freccia della taglia desiderata e lavorare verso la sinistra - sopra 24-30-33 m e M.2 cominciare in basso destra del diagramma e lavorare verso la sinistra - sopra le ultime 36-42-48 m. Continuare con il diagramma. Dopo 5 righe, M.2 è finito - continuare con M.3 e M.4 fino alla fine del diagramma. CONFEZIONE: Bretelle: Lavorare le bretelle così: Iniziare ca 9 cm dal bordo in alto dalla parte destra del lavoro (= sul dietro). Con il filato doppio e l’uncinetto n° 5 lavorare una catena di cat di ca 90 cm. Infilare la bretella in alto nella punta del davanti. Ripetere dall’altra parte. La lunghezza del top può essere regolata facendo un nodo alla nuca. Archetti: Lavorare archetti lungo ogni lato del lavoro = in mezzo dietro. Iniziare in alto e lavorare così: * 1 m.b, 3 cat, saltare 1 cm verso il basso *, ripetere da *-* fin in fondo. Lavorare una catena di ca 150 cm = cordino. Infilare il cordino negli archetti - iniziare in alto e infilarli in modo da creare degli incroci giù verso il basso. Frange: 1 frangia = 4 fili a 8 cm. Piegare i fili in due ed inserirli nella 1° riga di cat - vedere il posizionamento nel diagramma M.1. Fare un totale 28-32-36 frange. |
|||||||||||||
Spiegazioni del diagramma |
|||||||||||||
|
|||||||||||||
![]() |
|||||||||||||
![]() |
|||||||||||||
![]() |
|||||||||||||
![]() |
|||||||||||||
Avete terminato questo modello?Allora taggate le vostre foto con #dropspattern o inviatele alla #dropsfan gallery. Avete bisogno di aiuto con questo modello?Troverete 8 video tutorial, una sezione per i commenti/domande e molto altro guardando il modello su www.garnstudio.com © 1982-2025 DROPS Design A/S. Ci riserviamo tutti i diritti. Questo documento, compreso tutte le sue sotto-sezioni, è protetto dalle leggi sul copyright. Potete leggere quello che potete fare con i nostri modelli alla fine di ogni modello sul nostro sito. |
Lasciare un commento sul modello DROPS 69-1
Noi saremmo felici di ricevere i tuoi commenti e opinioni su questo modello!
Se vuoi fare una domanda, fai per favore attenzione a selezionare la categoria corretta nella casella qui sotto per velocizzare il processo di risposta. I campi richiesti sono indicati da *.