DROPS Super Sale - SAVE 30% on 5 wonderful yarns!

How to avoid a jog at the beginning of circular knitting

In this DROPS video we show how to create an invisible join when starting your circular knitting and in this way avoid a jog in your work.

Note! Cast on 1 additional stitch than what pattern tells you.

Join, making sure not to twist stitches on row.
Slip 1st stitch on left needle purl-wise over to right needle. Slip the 2nd stitch on right needle over the 1st.

Move the slipped stitch back to left needle. Tighten yarn ends. Place a marker to mark beginning of the round and start knitting.

You must read the pattern and maybe look at the chart to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.

Patterns using this technique

DROPS 178-15

DROPS 178-15
Change language:

Video #498, listed in: Learn to knit, Knitting tips & tricks, Learn how to avoid a jog

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Benjamin Robson wrote:

Hello, should/can I use this technique to make the men’s firenze jumper?

21.09.2019 - 20:50

DROPS Design :

Dear Mrs Robson, correct, you can use this technique every time you are joining cast on edge in the round. Happy knitting!

23.09.2019 - 10:23

Country flag Carine wrote:

Hallo, in deze video gebruiken jullie kleine rondbreinaalden. Waar kun je die kopen want in het patroon van de herentrui met raglan en sjaalkraag van ”Air”.DROPS EXTRA / 0-1159 moet ik de mouwen rondbreien met naald 6 en 7 mm. Maar doordat ik amper 44 steken moet opzetten zijn mijn rondebreinaalden te lang (met kabel 40 cm) Ik ben nu al dagen op zoek naar korte rondbreinaalden maat 6mm en 7 mm om een 40 tal steken te kunnen rondbreien. Kunnen jullie mij hieraan helpen?

09.08.2019 - 19:36

Country flag Bep Dropsie wrote:

Telpatroon van rok: Telpatroon voor DROPS 161-19 Ik zou graag uitleg willen hebben over telpatroon A.1 Wat is de uitleg van de lege witte vlakken rechts en links van het midden? Al bij voorbaat hartelijk dank. Bep Dropsie

07.07.2019 - 13:28

DROPS Design :

Dag Bep,

De lege witte vlakken zijn geen steken, dus je gaat gewoon verder met het eerst volgende vakje. (Door de omslag komen er steken bij op de volgende naald.)

11.08.2019 - 14:42

Country flag Liliane wrote:

Lukt dit ook voor een Noors telpatroon ? Vb Drops 122-43.

28.04.2019 - 14:29

Country flag Sara wrote:

Kan inte se videon tyvärr

14.04.2019 - 20:58

Country flag Lisbeth wrote:

1000 tak for dette nyttige trick. Fra nu af kan jeg lave pæne kanter :) Fantastisk. Så mange gode instruktionsvideoer. Tak for dem.

08.02.2019 - 18:54

Country flag Jennifer wrote:

Gleich am Anfang Heißt es ich soll zu Nadel Nr. 4 wechseln. Eine Reihe glatt rechts Stricken und vier Maschen zunehmen. Zitat: „dann weiter 0–0–0–0–2–2 RD glatt re str.“ Was bedeutet 0? Ich verstehe nicht was ich trinken soll.

03.02.2019 - 13:05

DROPS Design :

Liebe Jennifer, in den 4 ersten grösse stricken Sie nicht diese Runde, dh diese 2 Runde werden nur in den 2 grösseren Grösse gestrickt. Viel Spaß beim stricken!

04.02.2019 - 14:57

Country flag Loly Aguilar Araujo wrote:

Cuando hay pocos puntos en la aguja no se puede cerrar de esta forma no, yo no lo consigo .gracias

16.01.2019 - 12:40

DROPS Design :

Hola Loly. Cuando hay pocos puntos en aguja recomendamos usar un juego de agujas de doble punta. eso facilita mucho la labor y puedes usar este método perfectamente.

02.04.2019 - 15:03

Country flag Juguetes Whisper wrote:

Nunca usaremos los juguetes que tenemos en casa.

23.03.2018 - 22:05

Country flag Caterina Bargellini wrote:

Buongiorno, non riesco a capire una cosa, a ogni fine giro va ripetuto il passaggio, cioè aggiungere un punto, passarlo sul ferro, accavallare e lavorarlo? Vi ringrazio in anticipo per la risposta e per esserci con i vostri meravigliosi modelli e utilissimi consigli. Mi piacerebbe potervi incontrare in uno DRI miei tanti viaggi a Lillehammer dive risiedono mio figlio e mia nuora, è possibile ciò?

11.03.2018 - 22:09

DROPS Design :

Buongiorno Caterina. Il video mostra come chiudere il giro di avvio delle maglie in una lavorazione in tondo. Il passaggio mostrato deve essere fatto solo quando avvia le maglie, e non sui giri successivi. Buon lavoro!

12.03.2018 - 08:47

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to get invisible transitions when using double pointed needles.
3:47
How to get invisible transitions when using double pointed needles.

In this DROPS video we show a knitting tip to get invisible transitions when using double pointed needles. KNITTING TIP (with double pointed needles): To avoid the stitches in the transitions between needles being too large, always work 3 stitches from the next needle before changing needles; all the transitions between needles are then moved 3 stitches each time. We use the yarn DROPS Snow in the video You’ll find a pattern where you can use this technique by clicking on the picture below.
Video thumbnail for How to knit stripes with no jog / Helix knit
5:31
How to knit stripes with no jog / Helix knit

In this DROPS video we show how to knit stripes in the round without getting a jog in the transition, also called Helix knitting. In this video we use 3 colors and knit 13 stitches before changing color. Be sure to keep the colors separated and do not let the skeins cross when changing color. Every round there is one color knitted over 26 stitches. Do not tighten too much when changing color. We use the yarn DROPS Snow in the video.
Video thumbnail for How to fix a jog when casting off your circular knitting
2:01
How to fix a jog when casting off your circular knitting

In this DROPS video we show how to correct the jog that you will end up with when casting off your circular knitting. This is easily corrected when you weave in the end at the very end. You must read the pattern and maybe look at the chart to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
Video thumbnail for How to knit stripes in the round with no jog
3:39
How to knit stripes in the round with no jog

In this DROPS video we show how to knit stripes in the round without getting a jog in the transition. Change to a new color and work 1 round. Work the first stitch on the next round like this: Pick up the stitch under the first stitch on the left needle (pick up from behind in the front loop), and put it into the left needle. Knit the stitch together with the next stitch on the left needle. In this way, the transition becomes less visible. You can carry to other color along on the inside of the work. If the stripes are wide, you can twist the colors at the end of round on every 3 cm/ every 1 inch. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
Video thumbnail for How to work with 2 circular needles with different needle sizes
9:10
How to work with 2 circular needles with different needle sizes

In this DROPS video we show you how to work rib in a stocking stitch piece. To allow the rib to tighten, work the rib with a smaller needle size than the rest of the piece. Use both ends of the needle when working.
Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.