DROPS Children 49 · Lots of new kid designs!

How to knit an easy shawl collar

Shawl collars are popular and very easy to knit. In this DROPS video we show a shawl collar where the front edge is knitted in garter st.

When you bind off for shoulder, you keep the stitches from the front edge and continue working these so the collar follows the neckline on back piece to mid back of neck. Sew bind off edges on collars from each front piece tog mid back. Finally sew collar to neck line in back.

You must read the pattern to be able to follow. You’ll find patterns with this technique by clicking on the pictures below.

Patterns using this technique

DROPS 150-33

DROPS 150-33
Change language:

Video #434, listed in: Learn to knit, Knitting tips & tricks, Knitting Bands and Buttonholes

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Miriam wrote:

Y cómo se inserta el cuello en el delantero? porque sólo mostráis obviedades..

01.08.2018 - 16:15

DROPS Design :

Hola Miriam, En estos modelos el cuello chal se trabaja junto con el delantero. Mira las explicaciones en los textos.

28.08.2018 - 20:09

Country flag Cora Kramer wrote:

69-8: na de 12 cm ribbels van het L. voorpand ga ik nu op de goede kant verder in patroon en moet ook sjaal gaan breien met de 6 kantsteken. Maar als ik begin komen de sjaalsteken aan de zijnaad kant en niet aan de middenvoorkant. Doe ik iets verkeerd? Alvast bedankt, Cora Kramer.

28.09.2017 - 15:17

Country flag Judy wrote:

I'm working on nr 104-38 I still don't understand what the 'voorbiessteek' is. Is this the 'ribbelsteek' next to the 'tricotsteek' of the body, to make the collar? and how do I connect both front parts of this collar to make the whole collar? I hope you can illuminate.

09.01.2015 - 14:44

DROPS Design :

Beste Judy. Je mag ook in het Nederlands schrijven. En als je de vraag wilt stellen op het patroon is het voor mij sneller te vinden, meekijken en reageren :-) Fijn weekend.

09.01.2015 - 15:55

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work a diagonal shoulder, cast on stitches for the neckline and work the back piece together
21:11
How to work a diagonal shoulder, cast on stitches for the neckline and work the back piece together

In this DROPS video, we show you how to work each front piece with diagonal shoulders and short rows, the piece is worked bottom up. Then we show how to increase stitches for the neckline and join the shoulders for the back piece, then continue working top down. An I-cord band is worked on each side. We have already worked one section of the front piece and decreased stitches for the neckline. The video shows how we work 6 short rows (German short rows) on the right front piece, creating a diagonal shoulder. Then we show how to increase 1 stitch 3 times towards the neckline, which is now the back piece. Then we show the same for the left shoulder and finally cast on 12 stitches between the shoulders before the shoulders are knitted together. We use the yarn DROPS Snow in the video. This technique is used among other things in pattern DROPS 255-9, Driftwood Vest, with a different stitch count, number of short rows and cast-on stitches. You will find the pattern by clicking the picture below:
Video thumbnail for How to work a double knitted band without buttonholes
7:38
How to work a double knitted band without buttonholes

In this DROPS video we show how to work double band without buttonholes. Pick up stitches at the top of the piece / by shoulder on front piece, pick up 1 stitch in every knitted row down along the piece or skip every 4-5 stitch, inside 1 edge stitch. Look at your pattern what it says. After the pick up cast on 12 stitches for band (= at the bottom of the piece), but it can be different from pattern to pattern. Work band over the 12 stitches at the same time as band is knitted together with stitches picked up along the piece as follows: ROW 1 (= wrong side): Knit 1, * slip 1 stitch on to right needle purlwise with strand in front of piece, knit 1 *, work from *-* until 1 stitch remains of the 12 band stitches, slip the next 2 stitches on to right needle purlwise with strand in front of piece, turn. ROW 2 (= right side): Knit 2 together, *, slip 1 stitch on to right needle purlwise with strand in front of piece, knit 1 *, work from *-* until 1 stitch remains, slip last stitch on to right needle purlwise with strand in front of piece, turn. Repeat rows 1 and 2. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern using this technique by clicking on the pictures below.
Video thumbnail for How to work a double knitted band with buttonholes
14:14
How to work a double knitted band with buttonholes

In this DROPS video we show how to work double band with buttonholes. Pick up stitches along right front piece, with a long yarn end to pick up stitches with. Begin pick up at the bottom of front piece and pick up 1 stitch in every knitted row along the entire front piece or skip every 4-5 stitch, inside 1 edge stitch. Look at your pattern what it says. Now continue piece at the end of row where ball is (bottom of front piece). Cast on new stitches for band as an extension of the stitches pick up at the bottom of front piece (cast on stitches from wrong side. We cast on 16 stitches, but it can be different from pattern to pattern). Work band over the 16 stitches at the same time as band is knitted together with stitches picked up along the front piece as follows: ROW 1 (= right side): Slip first stitch on to right needle purlwise with strand in front of piece, * knit 1, slip 1 stitch on to right needle purlwise with strand in front of piece *, work from *-* until 1 stitch remains of the 16 band stitches, slip last stitch on to right needle knitwise, with strand behind piece, knit next stitch, pass slipped stitch over stitch worked, turn. ROW 2 (= wrong side): * Slip first/next stitch on to right needle purlwise with strand in front of piece, knit 1 *, work from *-* over all the 16 band stitches, turn. Repeat rows 1 and 2. Read in the pattern you are working from when buttonholes should be knitted. Work buttonhole, begin from right side, as follows: Work the first 8 stitches as before, turn and work over the 8 stitches as before, work 3 rows in total over the 8 stitches (work last row from right side). Cut the yarn. Work 4 rows in total as before over the remaining 8 band stitches (work first row from right side) and work last stitch from right side together with next stitch along edge of jacket as before. On last row from wrong side work as before over all band stitches and continue as before over all band stitches. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern using this technique by clicking on the pictures below.
Video thumbnail for How to work a double neck edge and bands
15:50
How to work a double neck edge and bands

In this DROPS video we show how to work a double neck edge and bands which are used in the «Love Links» jacket in DROPS 217-18. We have already worked 9 cm to the neck edge. On row 1 we show how to cast off 6 stitches (= band), knit over the next stitches and increase at the same time new stitches evenly over these stitches. Work rib over the last 6 stitches + 1 edge stitch in garter stitch. On row 2 we show how to cast off 6 stitches (= band), purl over the next stitches, purl yarn over twisted = no holes. Work 1 edge st in garter st in each side. Then work the yoke, read a pattern for further information about increases, marker and charts. Then knit up stitches along the bands, remember buttonholes. Then sew band to neck edge inside 1 edge stitch with seam in towards wrong side of garment. Fold rib at the top of neck double in towards wrong side of garment. Sew together opening mid front with small stitches. The jacket in DROPS 217-18 is worked in DROPS Merino Extra Fine, but in the video we use a thicker yarn; DROPS Snow. You must read a pattern to be able to follow this video properly. You’ll find a pattern using this technique by clicking on the picture below.
Video thumbnail for How to work a loose part of a jacket band separately.
14:46
How to work a loose part of a jacket band separately.

In this DROPS video we show how to work a loose part of a jacket band separately, and then sew it on the front piece afterwards. We have already worked the neck in rib with a buttonhole and 5 garter stitches in each side. These band stitches are worked in GARTERS and put on a stitch holder. Cast on a new stitch on each side, which will later be cast off = edge stitch which is worked in garter stitch. Work the back piece in stockinette stitches and increase according to pattern. Then work the loose bands to the correct size before putting them together with the yoke, then also cast off the edge stitches. Remember to cast off for buttonholes. Sew the bands neatly inside the 1 edge stitch on the yoke. We use the yarn DROPS Snow in the video. A band like this is used in the «Scent of pine Jacket» in DROPS 215-7, you can find the pattern by clicking on the picture below.
Video thumbnail for How to knit up stitches for a jacket band
5:39
How to knit up stitches for a jacket band

In this DROPS video we show how to knit up stitches for band to a jacket with a double neck. Then we work a little bit of the band, 1 K and 1 P, with 1 edge stitch in each side in garter stitch. You need to read a pattern to know how many stitches to knit up. We use the yarn DROPS Snow in the video. A band like this is used in the "Wild Mint Cardigan" jacket, you can find the pattern by clicking on the picture below.