Julie by DROPS Design

Dětský pulovr s ažurovým vzorem pletený z příze DROPS Air. Velikost 2 - 12 let.

DROPS design: model č. ai-009-bn
Skupina přízí C nebo A + A
----------------------------------------------------------
Velikost: 2 - 3/4 - 5/6 - 7/8 - 9/10 - 11/12 let
Velikost v cm: 92 - 98/104 - 110/116 - 122/128 - 134/140 - 146/152
Materiál:
DROPS AIR firmy Garnstudio (spadá do skupiny přízí C)
150-150-150-200-200-250 g, barva č. 10, mlha

Použitou přízi můžete také nahradit některou ze seznamu:
"Náhradní příze (Skupina přízí C)" – viz link níže.

DROPS PONOŽKOVÉ JEHLICE a KRUHOVÉ JEHLICE (40 a 60 cm) č.5,5 – nebo velikosti potřebné k upletení zkušebního vzorku o rozměrech 16 ok a 20 řad lícovým žerzejem = 10 cm na šířku a 10 cm na výšku.

Vyrobili jste si tento nebo nějaký jiný z našich modelů? Přidejte ke svým fotkám na sociálních sítích tag #dropsdesign - díky tomu je uvidíme i my!

Chcete použít jinou přízi? Zkuste náš převodník!

65% alpaka, 28% polyamid, 7% vlna
od 103.00 Kč /50g
DROPS Air mix DROPS Air mix 103.00 Kč /50g
Ganella
Objednat
DROPS Air uni colour DROPS Air uni colour 103.00 Kč /50g
Ganella
Objednat
Jehlice a háčky
Přízi na tento model můžete mít už za 309Kč. Více zde.

Návod

VROUBKOVÝ VZOR:
V řadách: 1 vroubek = 2 řady hladce. Pleteme stále hladce, lícové i rubové řady.
V kruhových řadách: 1 vroubek = 2 kruhové řady. Pleteme střídavě 1 kruhovou řadu hladce, 1 obrace.

VZOR:
Viz schémata A.1 až A.3. Zobrazeny jsou všechny řady vzoru nahlížené z lícové strany. Zvolte si schéma pro požadovanou velikost.

TIP - PŘIDÁVÁNÍ (podpaží):
Začínáme 1 oko před značkou: 1x nahodíme, 2 oka upleteme hladce (značka leží mezi nimi), 1x nahodímer (= přidali jsme 2 oka). V následující kruhové řadě pleteme nahození za zadní nit, aby se v pletenině netvořily dírky.
----------------------------------------------------------

PULOVR:
Trup pleteme v kruhových řadách na kruhové jehlici až po průramky, pak pleteninu rozdělíme na přední a zadní díl a ty dokončíme odděleně v řadách. Rukávy pleteme v kruhových řadách na ponožkových jehlicích/krátké kruhové jehlici.

TRUP:
Na kruhovou jehlici č.5,5 nahodíme přízí Air 104-108-116-120-128-136 ok a upleteme 2 vroubky VROUBKOVÝM VZOREM – viz výše. Označíme si začátek kruhové řady a druhou značku umístíme za 52.-54.-58.-60.-64.-68. oko (= boky). Upleteme 1 kruhovou řadu hladce. Následující kruhovou řadu pleteme takto: 7-8-10-7-9-11 ok lícovým žerzejem, 2 oka obrace, vzor A.1 (= 6-6-6-8-8-8 ok), 4 oka obrace, vzor A.2 (= 14-14-14-18-18-18 ok), 4 oka obrace, vzor A.3 (= 6-6-6-8-8-8 ok), 2 oka obrace, zbytek kruhové řady dopleteme hladce. V tomto rozvržení vzorů pokračujeme a značky během pletení posouváme (snímáme) vždy do aktuálně rozpracované kruhové řady.
Ve výši 20-22-24-27-30-33 cm uzavřeme na každém boku 2 oka (tj. uzavřeme 1 oko na obou stranách obou značek; = průramky). Přední a zadní díl teď dokončíme odděleně.

ZADNÍ DÍL:
= 50-52-56-58-62-66 ok. Pleteme v řadách lícovým žerzejem. Ve výši 30-33-36-40-44-48 cm uzavřeme prostředních 16-18-20-22-22-24 ok (= průkrčník) a obě náramenice dokončíme odděleně. V následující řadě uzavřeme na obou okrajích průkrčníku ještě 1 oko = zbývá 16-16-17-17-19-20 ok každé náramenice. Pleteme lícovým žerzejem až do výše 31-34-37-41-45-49 cm, pak upleteme 2 vroubky VROUBKOVÝM VZOREM a poté všechna oka uzavřeme.
Díl měří asi 32-35-38-42-46-50 cm (měřeno od ramene).

PŘEDNÍ DÍL:
= 50-52-56-58-62-66 ok. Pleteme v řadách vzorem jako dosud až do výše 28-31-33-37-40-44 cm. Pak odložíme prostředních 10-12-14-16-16-18 ok na pomocnou jehlici (= průkrčník) a obě náramenice dokončíme odděleně. Průkrčník ještě dále tvarujeme – uzavřeme na obou jeho okrajích (vždy na začátku řady) 1x 2 oka a 2x 1 oko = zbývá 16-16-17-17-19-20 ok každé náramenice. Pleteme lícovým žerzejem až do výše 31-34-37-41-45-49 cm, pak upleteme 2 vroubky VROUBKOVÝM VZOREM a poté všechna oka uzavřeme.
Díl měří asi 32-35-38-42-46-50 cm (měřeno od ramene).

RUKÁV:
Na ponožkové jehlice č.5,5 nahodíme přízí Air 28-28-30-30-32-32 ok a upleteme v kruhových řadách 3 vroubky VROUBKOVÝM VZOREM – viz výše. Označíme si začátek kruhové řady = střed vnitřní strany rukávu, podpaží. Pleteme v kruhových řadách vroubkovým vzorem. Ve výši 6 cm přidáme uprostřed podpaží 2 oka - viz TIP - PŘIDÁVÁNÍ. Takto přidáváme vždy po 4-4-4-4-4-4 cm výšky, celkem 5-7-7-9-10-11x = 38-42-44-48-52-54 ok. Ve výši 27-32-36-40-44-48 cm všechna oka uzavřeme.
Stejným způsobem upleteme i druhý rukáv.

DOKONČENÍ:
Sešijeme náramenice. Vsadíme rukávy.

LEM PRŮKRČNÍKU:
Krátkou kruhovou jehlicí č.5,5 nabereme z lícové strany z okraje průkrčníku asi 58 až 68 ok (včetně odložených ok z pomocné jehlice). Upleteme v kruhových řadách 3 vroubky. Pak všechna oka hladce uzavřeme.

Schéma

= lícový žerzej (líc hladce, rub obrace)
= rubový žerzej (líc obrace, rub hladce)
= 1x nahodíme mezi 2 oky
= 2 oka spleteme hladce
= 1 oko sejmeme hladce, 1 upleteme hladce a sejmuté přes ně přetáhneme


Potřebujete poradit s tímto návodem?

Děkujeme, že jste si vybrali návod DROPS Design. Zakládáme si na tom, že dáváme k dispozici návody ověřené a snadno srozumitelné. Všechny návody jsou přeložené z norského originálu a tak si můžete kdykoli srovnat rozměry a počty s původním návodem (DROPS Children 30-10) .

Máte s návodem potíže? Níže najdete seznam odkazů, které vám pomohou dokončit vaše dílo co nejdříve - nebo se třeba přiučit něco nového.

Máme takopodrobné rozpisy různých technik a postupů krok za krokem - najdete je zde.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

nahoru

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

nahoru

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

nahoru

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

nahoru

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

nahoru

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

nahoru

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

nahoru

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

nahoru

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

nahoru

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

nahoru

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

nahoru

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

nahoru

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

nahoru

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

nahoru

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

nahoru

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

nahoru

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

nahoru

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

nahoru

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

nahoru

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

nahoru

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

nahoru

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

nahoru

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

nahoru

Pořídili jste si přízi DROPS na tento model? Pak máte taky právo žádat po svém prodejci, u něhož jste nakoupili, pomoc a rady. Seznam DROPS obchodů najdete tady!
Pořád se nemůžete dobrat odpovědi, kterou hledáte? Pak posuňte stránku dolů a napište nám svůj dotaz, naši specialisté se vám pokusí poradit. Obvykle to zvládneme během 5 až 10 pracovních dnů.. Mezitím si můžete pročíst otázky a odpovědi, které k tomuto modelu položili ostatní, nebo navštívit skupinu DROPS Workshop na Facebooku, kde vám může poradit některá spřízněná duše!

Komentáře / Otázky (9)

Carlota 25.10.2019 - 12:06:

Bonjour, j’ai tricoté en circulaire jusqu’aux emmanchures et je ne parviens pas à tricoter le motif du devant avec les aiguilles droites. Faut-il commencer par un rang endroit/envers ? (Je commence avec un rang endroit - première ligne du diagramme en lisant du bas vers le haut et de la droite vers la gauche, rang suivant de la gauche vers la droite). \r\nPeut-on continuer en circulaire en tricotant les manches en même temps comme les pulls tricotés en bottom up ? Merci

DROPS Design 25.10.2019 kl. 13:59:

Bonjour Carlotta, si vous avez rabattu les mailles au dernier tour sur un rang ajouré des diagrammes, votre premier rang sur le dos/le devant sera un rang sur l'envers, si vous avez rabattu les mailles au dernier tour sur un tour sans jour/diminution, le 1er rang du dos/devant sera alors un rang sur l'endroit. Lisez ensuite les diagrammes de gauche à droite sur l'endroit et de droite à gauche sur l'envers. Bon tricot!

Jane Moore 21.08.2019 - 18:11:

Looking for free knitted baby dress patterns

DROPS Design 22.08.2019 kl. 09:51:

Dear Mrs Moore, please find our knitted baby dresses patterns here. Happy knitting!

Sigrid 11.01.2019 - 14:31:

Wie sind die Diagramme beim Rumpfstricken zu verstehen, daja nur die rechte Seite rundgegestrickt wird? müssen die Rückreihen in rechten oder linken Maschen gestrickt werden?

DROPS Design 11.01.2019 kl. 15:09:

Liebe Sigrid, die Diagramme zeigen alle Reihen, beginnen Sie die Diagramme an der unteren Ecke an der rechten Seite und lesen Sie sie rechts nach links bei jeder Runde. Wenn Sie dann hin un zurück stricken werden die Rückreihen links nach rechts gelesen. Viel Spaß beim stricken!

Jannie 05.01.2019 - 17:30:

Hvor mange nøgler drops air alpaka skal jeg beregne til en bluse i str 12 år? Og hvordan beregner man generelt mængden af garnforbrug? 😊🤔

DROPS Design 07.01.2019 kl. 10:15:

Hei Janni. helt øverst i oppskriften, under "materialer" står det hvor mange gram garn du trenger i hver størrelse. DROPS Air kommer i nøster på 50 g. til størrelse 12 år trenger du 250 g = 5 nøster a 50 g. Vi har en garnkalkulator som du kan bruke om du ønsker å finne alternative garn. Den vil også fortelle deg hvor mange gram du trenger. God fornøyelse

Solfrid 13.11.2018 - 16:32:

Skjønner ikkje forklaring på felling til halsen 😱

DROPS Design 14.11.2018 kl. 08:13:

Hei Solfrid, Du begynner med å felle av de midterste 16-18-20-22-22-24 maskene på bakstykket og deretter strikker hver skulder ferdig for seg. Du fortsetter med glattstrikk og feller av 1 maske på hals enden av neste pinne = 16-16-17-17-19-20 masker tilbake på skulderen. Da strikker du skulderen ferdig uten flere fellinger og andre skulder på samme måten. Frontstykket er mye av det samme, men flere fellinger til halsen og strikker mønster. God fornøyelse!

Tone 18.06.2018 - 11:57:

Neida, gjør ikke noe. Håper bare jeg får det til når jeg kommer så langt og skal felle til hals. Ser hva du mener når det står Strikk rett ut omgangen, men trodde det gjaldt til neste merketråd for så å begynne på ny. Mottaker vet jo ikke jeg har gjort feil

DROPS Design 19.06.2018 kl. 08:58:

Hej Tone, Jeg er sikker på at modtageren bliver superglad for gaven. Rigtig god fornøjelse! :)

Tone 18.06.2018 - 10:08:

Hei, jeg har nå kommet til der hvor jeg skal strikke forside og bakside hver for seg. På bakstykket står det Fortsett med glattstrikk! Skal da hele bakstykket være i glattstrikk?? Dette har ikke stått tidligere i oppskriften så jeg har strikket mønster både framme og bak. Er dette feil? Isåfall burde det stått i oppskriften.

DROPS Design 18.06.2018 kl. 11:18:

Hej Tone, Ja tanken er egentlig at bagstykket skulle strikkes i glatstrik, du ser det der hvor der står "strikk rett ut omgangen" helt i starten hvor vi beskriver første omgang. MEN gør det noget? Kan du ikke fortsætte ryggen med mønster? God fornøjelse!

Marit 29.03.2018 - 18:19:

Skal de vrange maskene som står skrevet ned på bolen strikkes vrange på de omgangene som er bare rette i selve mønsteret?

DROPS Design 13.04.2018 kl. 10:46:

Hej Marit, vrang maskerne på hver side af diagrammerne strikkes vrang fra retsiden og ret fra vrangen. God fornøjelse!

Trine Haugland 29.10.2017 - 14:20:

Det er vanskelig å tyde diagrammet, da beskrivelsen av tegnene er mangelfull. Håper dette kan ordnes

Přidejte komentář k návodu DROPS Children 30-10

Rádi bychom věděli, co si o tomto modelu myslíte!

Pokud se chcete na něco zeptat, dbejte prosím na to, abyste ve formuláři níže vybrali správnou kategorii - díky tomu se dříve dozvíte, co potřebujete vědět. Povinná pole jsou označena *.