DROPS / 152 / 26

Sittin' On The Dock of the Bay by DROPS Design

DROPS plstěné sedáky háčkované z dvojité příze "Andes".


DROPS design: model č. an-020
Skupina přízí: E + E nebo F
-----------------------------------------------------------
Rozměry před zplstěním:
Malý sedák: průměr asi 38 cm
Velký sedák: průměr asi 51 cm

Rozměry po zplstění:
Malý sedák: průměr asi 30 cm
Velký sedák: průměr asi 40 cm

Materiál: DROPS ANDES firmy Garnstudio
200-300 g, barva č.3740, korálová
nebo
200-300 g, barva č.3755, fuchsiová

DROPS HÁČEK č.9 – nebo velikosti potřebné k uháčkování zkušebního vzorku o šířce 7 DS dvojitou přízí = 10 cm.

Vyrobili jste si tento nebo nějaký jiný z našich modelů? Přidejte ke svým fotkám na sociálních sítích tag #dropsdesign - díky tomu je uvidíme i my!

Chcete použít jinou přízi? Zkuste náš převodník!

65% vlna, 35% alpaka
od 138.00 Kč /100g
DROPS Andes uni colour DROPS Andes uni colour 138.00 Kč /100g
Ganella
Objednat
DROPS Andes mix DROPS Andes mix 147.00 Kč /100g
Ganella
Objednat
Jehlice a háčky
Přízi na tento model můžete mít už za 276Kč. Více zde.

Návod

TIP:
Na začátku kruhové řady z KS nahrazujeme první z nich 1 řo.
Na začátku kruhové řady z 2x nahozených DS nahrazujeme první z nich 4 řo.

VZOR:
Viz schémata A.1. a A.2.
----------------------------------------------------------

MALÝ SEDÁK:
Háčkem č.9 a dvojitou přízí Andes uháčkujeme 4 řo a spojíme je pevným okem do kroužku.
1. KRUHOVÁ ŘADA: do kroužku z řo uháčkujeme 10 KS.
2. KRUHOVÁ ŘADA: po 2 2x nahozených DS do každého KS = 20 2x nahozených DS – viz TIP!
Poté háčkujeme vzor dle schématu A.1. Sekvenci vzoru opakujeme v průběhu celé kruhové řady (= celkem 10 sekvencí). Po dokončení 1 celé sekvence vzoru (na výšku) je sedák hotov. Díl měří asi 38 cm v průměru.
Přízi odstřihneme a zapošijeme.

VELKÝ SEDÁK:
Háčkem č.9 a dvojitou přízí Andes uháčkujeme 5 řo a spojíme je pevným okem do kroužku.
1. KRUHOVÁ ŘADA: do kroužku z řo uháčkujeme 12 KS.
2. KRUHOVÁ ŘADA: po 2 2x nahozených DS do každého KS = 24 2x nahozených DS – viz TIP!
Poté háčkujeme vzor dle schématu A.2. Sekvenci vzoru opakujeme v průběhu celé kruhové řady (= celkem 6 sekvencí). Po dokončení 1 celé sekvence vzoru (na výšku) je sedák hotov. Díl měří asi 51 cm v průměru.
Přízi odstřihneme a zapošijeme.

PLSTĚNÍ:
Sedák vypereme v pračce. Teplotu nastavíme na 40 stupňů, přidáme prací prášek bez enzymů a bělidel a pereme běžným programem vč. odstředění, nepředepíráme. Po vyprání vytvarujeme mokrý sedák do požadovaného tvaru a necháme uschnout. Při opakovaném praní pereme programem pro jemné/vlněné prádlo.

Schéma

= řo
= pevné oko
= KS do obloučku z řo
= 2x nahozený DS
= KS do oka
= háčkujeme 1 2x nahozený DS, ale nedokončíme jej – před posledním protažením příze začneme háčkovat další 2x nahozený DS do téhož KS, ale při posledním protažení protáhneme přízi všemi 3 smyčkami na háčku


Potřebujete poradit s tímto návodem?

Děkujeme, že jste si vybrali návod DROPS Design. Zakládáme si na tom, že dáváme k dispozici návody ověřené a snadno srozumitelné. Všechny návody jsou přeložené z norského originálu a tak si můžete kdykoli srovnat rozměry a počty s původním návodem (DROPS 152-26) .

Máte s návodem potíže? Níže najdete seznam odkazů, které vám pomohou dokončit vaše dílo co nejdříve - nebo se třeba přiučit něco nového.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

nahoru

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

nahoru

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

nahoru

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

nahoru

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

nahoru

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

nahoru

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

nahoru

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

nahoru

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

nahoru

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

nahoru

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

nahoru

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

nahoru

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

nahoru

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

nahoru

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

nahoru

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

nahoru

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

nahoru

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

nahoru

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

nahoru

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

nahoru

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

nahoru

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

nahoru

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

nahoru

Pořídili jste si přízi DROPS na tento model? Pak máte taky právo žádat po svém prodejci, u něhož jste nakoupili, pomoc a rady. Seznam DROPS obchodů najdete tady!
Pořád se nemůžete dobrat odpovědi, kterou hledáte? Pak posuňte stránku dolů a napište nám svůj dotaz, naši specialisté se vám pokusí poradit. Obvykle to zvládneme během 5 až 10 pracovních dnů.. Mezitím si můžete pročíst otázky a odpovědi, které k tomuto modelu položili ostatní, nebo navštívit skupinu DROPS Workshop na Facebooku, kde vám může poradit některá spřízněná duše!

Komentáře / Otázky (19)

Anikjl 04.11.2016 - 14:50:

Merci pr tous!donc il ny a donc pas de symboles pr sa alors???tbnaprem!!:-*!!

Anikjl 04.11.2016 - 14:25:

Rebonjour encore moi juste une petite question encore comment on sait quand il faut sauter 3 m ou +??je narrive pad à voir ds diagramme??merci encore pour votre baide!!

DROPS Design 04.11.2016 kl. 14:33:

Bonjour Anikjl, quand on saute 3 m, on ne les crochète pas (= ms non crochetées sur ce rang, comptez 3 ms, et crochetez dans la ms suivante comme indiqué. Bon crochet!

Anikjl 04.11.2016 - 10:55:

Oh merci merciiii.Mm Drop pr votre aide je n en etais pas si loin que sa!à vrai dire c ma1 iere traduction de diagramme lol!!tbn vendredi à vs!!':-*'!!!

Anikjl 03.11.2016 - 16:19:

Bonjour je suis entrain de faire se dessous chaise (le petit)! Mais je suis un peux perdue au 4 iem rang avec le diagramme pr le lire Pr moi je dois faire 1 ML+1DB +3ML+1 otre DB puis 3 ML sur tous le rang??? Ou bien 2 DB+3MLsur ts le rg?? Enfin jespére être claire c sur le diagramme A1 pr le 4 rg!! Merci bcp pr votre aide!!

DROPS Design 04.11.2016 kl. 09:44:

Bonjour Anikjl, au 6ème rang de A.1 (= 4ème rang après les 2 premiers décrits), on crochète: *2 DB écoulées ens dans la 1ère ms, 3 ml, sautez 3 ms, 2 x 2 DB écoulées ens dans la ms suivante, 3 ml, sautez 3 ms, 2 DB écoulées ens dans la ms suivante*, répétez de *-* tout le tour. Bon crochet!

Marlen 15.12.2015 - 15:57:

Thank you for the answer, but the linked site doesn't answer my questions. And I bought the wool at an internet shop (wool warehouse), so I can't really ask them either. Could you maybe look at my questions again? Thank you! Merry Christmas :)

DROPS Design 17.12.2015 kl. 20:48:

Dear Marlen, do avoid colour run different colours should be washed separately. It is okay to wash them with some other similar colour items.

Marlen 10.12.2015 - 14:21:

Just a question regarding the felting process: Do I wash one cushion at a time or could I throw two cushions (with different colours) in the washing mashine? And can I add other stuff as well or should the cushion be the only thing in the washing mashine besides the towel. Thank you.

DROPS Design 10.12.2015 kl. 18:19:

Dear Marlen, read more about felting here and remember you will get individual help & assistance from your DROPS store. Happy felting!

Christina Lindbäck 01.11.2015 - 10:46:

Hej. Virkar det lilla sittunderlaget när jag efter v 2 ska gå över till diagram då tar det stopp fattar inte hur jag läser diagramet. Häls Christina

DROPS Design 02.11.2015 kl. 10:04:

Hej Christina, de första 2 varven har du virkat enligt teksten och diagrammet. Nu virkar du 1 fm i första dbl-st, 2 fm i nästa dbl-st, fortsätt så varvet runt. Lycka till!

Marit Hauge 09.09.2015 - 16:15:

Hei! Hekler sitteunderlag A2. På omg 6 er jeg i tvil.. Er det 3 fm i hver av de tre dst, 2 fm i neste dst, 4 fm... og deretter? Vanligvis er det rapporter som gjentar seg.. men her er det noe tull. Please legg igjen svar. hilsen Marit

DROPS Design 17.09.2015 kl. 11:44:

Hej Marit, ja det stemmer 3 fm i hver av de tre dst, 2 fm i neste dst, 4 fm i hver af de 4 dst, og så forfra igen... God fornøjelse!

Alexandra 02.12.2014 - 07:51:

HI! Bin gerade dabei, das Sitzkissen zu häkeln. Leider hat es bei mir vor dem Filzen nur einen Durchmesser von 41cm. Daher würde ich es gerne um eine weitere Runde von zusammengehäkelten Doppelstäbchen erweitern. Könnte ich diese wie Runde 6 arbeiten, also Büschel aus Doppelstäbchen und dann drei FM auslassen, oder müsste ich zwecks Zunahmen anders verfahren? Danke, Alex

DROPS Design 03.12.2014 kl. 22:20:

Liebe Alexandra, am besten probieren Sie es einfach so aus, wie Sie es vorgeschlagen haben, eigentlich sollte das funktionieren. Sie müssten an sich relativ schnell merken, ob irgendwas spannt oder sich wellt und können das dann dementsprechend anpassen. Nach der Büschel-M-Runde sollten Sie auf jeden Fall noch die nächste Rd mit fM häkeln und evtl. noch eine zusätzliche Rd mit fM oder Stb. Nach dem Filzen können Sie die Sitzunterlage auch noch gut in Form ziehen.

Liz Key 04.08.2014 - 01:22:

Hi! I was trying to find a video or written pattern for these. I don't know how to read diagrams very well?

DROPS Design 04.08.2014 kl. 10:18:

Dear Mrs Key, in the diagram 1 st is represented by 1 symbol - see tab "videos" to learn more about the sts , work in the round following A.1 (beg of round) and then repeat A.2 around. Happy crocheting!

Přidejte komentář k návodu DROPS 152-26

Rádi bychom věděli, co si o tomto modelu myslíte!

Pokud se chcete na něco zeptat, dbejte prosím na to, abyste ve formuláři níže vybrali správnou kategorii - díky tomu se dříve dozvíte, co potřebujete vědět. Povinná pole jsou označena *.