DROPS / 131 / 47

Rosebud by DROPS Design

Knitted DROPS hat and neck warmer in garter st with cable in ”Eskimo”.

DROPS design: Pattern no EE-392-393
Yarn group E
Size: S - M - L
Head circumference: approx. 54-56-58 cm
Materials: DROPS ESKIMO from Garnstudio
100 g for all sizes in colour no 08, red

Neck warmer:
Size: One-size
Materials: DROPS ESKIMO from Garnstudio
200 g colour no 08, red

DROPS STRAIGHT NEEDLES SIZE 8 mm - or size needed to get 11 sts x 15 rows in garter st = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Wool
from 1.90 £ /50g
DROPS Eskimo uni colour DROPS Eskimo uni colour 1.90 £ /50g
Wool Warehouse Direct Ltd
DROPS Eskimo mix DROPS Eskimo mix 2.20 £ /50g
Wool Warehouse Direct Ltd
DROPS Eskimo print DROPS Eskimo print 2.40 £ /50g
Wool Warehouse Direct Ltd
DROPS Needles & Hooks
You can get the yarn to make this pattern from 3.80£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
See diagram M.1. The diagram shows the pattern from RS.

GARTER ST (back and forth on needle): K all rows.

Every time piece is turned in the middle of piece, slip first st as if to K, tighten the thread and return, this is done to avoid holes in the transitions.

Worked back and forth on needle. Cast on 32-33-34 sts on needle size 8 mm with Eskimo. 1st row (= from RS) begins at bottom edge of hat. Work diagram M.1 (= 12 sts), then work in GARTER ST -see explanation above - out towards the top of the hat. Continue like this while AT THE SAME TIME working short rows starting from RS - read KNITTING TIP: * Work back and forth over all sts. Work 29 sts, turn piece and work back. Work 23 sts, turn piece and work back *. Repeat from *-* until piece measures approx. 52-54-56 cm (at the widest). Cast off all sts.

Sew hat tog mid back. Sew edge to edge in front loop of outermost st to avoid a chunky seam. Tighten tog sts at the top and fasten the thread tightly.

The piece is worked back and forth on needle and sewn together afterwards. The whole piece is worked in diagram M.1 and garter st.
Cast on 38 sts on needle size 8 mm with Eskimo. Now work as follows - read KNITTING TIP: * Work diagram M.1 (= 12 sts), turn piece and work back in M.1. Work M.1, then work 4 sts in GARTER ST - see explanation above (= 16 sts in total), turn piece and work back in garter st and M.1. Work 4 rows over all sts while AT THE SAME TIME continuing first 12 sts in M.1 and remaining sts in garter st *. Repeat from *-* until piece measures approx. 46 cm at the top around neck, finish after one whole repetition. Cast off all sts.

Sew tog edge to edge in front loop of outermost st to avoid a chunky and visible seam. Fold down the neck.


= K from RS, P from WS
= put 4 sts on cable needle behind work, K4, K4 from cable needle
= put 4 sts on cable needle in front of work, K4, K4 from cable needle

Debbie 27.02.2019 - 00:08:

Combien doit mesurer la hauteur du tour de cou de la torsade au haut du cou car avec le nombre de mailles en point mousse, ça ne peut être rabattus pour former un col roulé. Merci pour la réponse.

DROPS Design 27.02.2019 kl. 08:55:

Bonjour Debbie, on tricote au point mousse sur 26 mailles (+ les 12 m de la torsade), on doit donc avoir environ 23 cm de mailles au point mousse - pensez à bien vérifier votre tension, vous devez avoir 11 m x 15 rangs point mousse = 10 x 10 cm. Si votre échantillon est juste, vous devriez obtenir le même résultat que sur la photo. Bon tricot!

Anita Aittomäki 05.01.2018 - 21:13:

Miksi ohjeessa ei ole tai ehkä voisi sen lisätä 1.kerros neulo ....silmukkaa (jää ....silmukkaa) ja käännä 2.kerros neulo ....silmukkaa (jää ....silmukkaa) ja käännä 3.kerros .... 4.kerros....Tai ....kerros neulo kaikki silmukat. toista kerrokset 1. 2. 3. Jne järjestyksessä Eli onko lyhennetty kerros aina ?- kuinka monessa ja monellako silmukalla se neulotaan?Palmikon teossa ei ollut ongelmaa mutta juuri tuo lyhennetty kerros

Anita Aittomäki 05.01.2018 - 21:12:

Sekava ohje.Videossa kun yritin laskeskella montako silmukkaa tehdään ja montako jäi mutta siihen 29 silmukkaan en osunut kuin ehkä kerran, joten jossain on vikaa.

DROPS Design 09.01.2018 kl. 17:52:

Hei, lyhennetyt kerrokset neulotaan seuraavasti: Neulot aluksi kaikki silmukat, käännät työn ja neulot taas kaikki silmukat. Käännät työn ja neulot 29 silmukkaa, käännät työn ja neulot nämä 29 silmukkaa. Käännät työn ja neulot 23 silmukkaa, käännät työn ja neulot nämä samat 23 silmukkaa. Nämä kerrokset toistetaan.

Paulina 30.11.2016 - 07:32:

Gracias por compartir todo lo que haces esta hermoso, quisiera saber como hacer para conseguir un video del paso a paso de tus prendas

DROPS Design 04.12.2016 kl. 18:49:

Hola Paulina. Publicamos vídeos continuamente. Aquí puedes consultar todos los vídeos que tenemos publicados a día de hoy: https://www.garnstudio.com/video.php?lang=es

Julia Leist-Heiermann 11.10.2016 - 21:34:

Hallo, ich möchte gerne die Rosebud-Mütze stricken und frage mich, wie ich die 7. Reihe des M1 stricke. Lege ich tatsächlich die ersten 4 Maschen auf die Zopfnadel? Wie bekomme ich denn den Faden zu den dann zuerst zu strickenden Maschen? Leider endet das Video genau vor dieser Stelle. Danke und herzliche Grüße , Julia Leist-Heiermann

DROPS Design 12.10.2016 kl. 09:35:

Liebe Frau Leis-Heiermann, bei der 7. Reihe legen Sie die 4 ersten M. auf der Zopfnadel hinter die Arbeit - passen Sie nur mal auf daß der Faden nicht zu locker nor zu eng ist, dann stricken Sie die nächste 4 M, und dann die 4 M. von der Zopfnadel.

SandraLiliana Ibarra Nuñez 06.07.2016 - 17:16:

Hola muy buenas tardes,disculpe la molestia,soy principiante en esto del tejido,pero me encanta este Modelo,me gustaría saber si cuenta con el video,pues no entiendo las abreviaciones de las indicaciones,de antemano muchísimas gracias por su atención y bendiciones. 😊

DROPS Design 12.07.2016 kl. 23:20:

Hola Sandra. Bájo éste línk tíenes las explicaciones necesarias para realizar este modelo: . Puedes encontrar más videos en el apartado Vídeos al principio del patrón.

Veronica 27.01.2016 - 22:57:

Hi There! I am making the hat, starting by casting on 34 stitches (large). When I get to the short rows and it says knit 29 sts turn & work back, then 23 sts turn & work back.... does this mean that I never actually knit over the final 5 stitches (30th-34th sts)? Thanks!

DROPS Design 28.01.2016 kl. 13:27:

Dear Veronica, you have to work short rows to get the correct shape for the hat, ie *work 2 rows over all sts, 2 rows over the first 29 sts, 2 rows over the first 23 sts* and repeat from *-*, ie you will 1 time from *-* = 2 rows over all sts and 4 rows over the sts at the outermost edge - see also video below showing hat in 1st size. Happy knitting!

Britta Andersson 26.01.2016 - 14:36:

Har stickat mössan men förstår inte hur jag skall montera ihop den haft 34 maskor fr början- stickat 29 m resp 23 m fram och tillbaka fem maskor har suttit på stickan utan att sticka dom har jag gjort fel eller hur monterar jag ihop mössan tacksam för svar

DROPS Design 04.03.2016 kl. 08:58:

Hej. När du stickar de förkortade varven så stickar du först alla maskor fram och tillbaka, sedan 29 m fram och tillbaka, sedan 23 m fram och tillbaka. Sedan stickar du återigen alla m fram och tillbaka, 29 m fram och tillbaka, 23 m fram och tillbaka och så fortsätter du så. Under fliken videor finns en video som heter ”Fläta och förkortade varv i DROPS 131-47” som du kan se på. Lycka till!

Martina 13.01.2016 - 01:44:

Buonasera!trovo questo modello molto interessante..sto provando a fare il cappello ma non riesco a capire come farlo. monto 32 maglie e le prime 12 le lavoro secondo lo schema, le restanti a legaccio..ma quali sono le maglie che devo lavorare sui ferri accorciati? e da quale ferrro devo iniziare a farlo? grazie :)

DROPS Design 13.01.2016 kl. 14:34:

Buongiorno Martina, deve avviare 32 m, lavorare le prime 12 m secondo M.1 e le altre m (verso la parte superiore del berretto) a legaccio e poi lavori il ferro di ritorno a dir fino alle ultime 12 m e poi secondo M.1. §Dal ferro successivo (diritto del lavoro) inizi a lavorare a ferri accorciati come indicato nelle spiegazioni, facendo attenzione che le prime 12 m del f di andata e le ultime 12 m del f di ritorno sono il diagramma M.1. Ci riscriva se ha altri dubbi. Buon lavoro!

Dalia 12.01.2016 - 16:34:

Hello .. I am trying to knit the neck warmer in this pattern ... the instructions do not tell you how many stitches to knit and then turn or how many times to do this .. would it be possible for the instructions be sent to me so I could knit this please .. I really love this pattern

DROPS Design 13.01.2016 kl. 10:39:

Dear Dalia, you will find short rows under "hat": *work 2 rows over all sts, 2 rows over 29 sts, 2 rows over 23 sts*, repeat from *-* - see also video below. Happy knitting!

Post a comment to pattern DROPS 131-47

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.