DROPS Super Sale - SAVE 30% on 6 cotton yarns all July!

How to knit a sock with a gusset heel (basic method)

Video thumbnail for How to knit a sock with a gusset heel (basic method)
In this DROPS video we show how to knit a gusset heel on a sock following a basic method.

Knit the heel sts in the back in stockinette st back and forth on needles for 5-6 cm/2-2½ inches.
Start dec on next row from RS. Knit row until in pattern mentioned numbers of sts remain, K2 tog into back of loop, turn piece.
Knit WS row until in pattern mentioned numbers of sts remain, P2 tog, turn piece.
Continue back and forth dec like this with 1 less st remaining each time before working 2 sts tog.
After heel dec pick up in pattern mentioned numbers of sts on each side of heel and continue in stockinette st in the round on all needles again.

You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.

Patterns using this technique

DROPS 167-32

DROPS 167-32
DROPS Baby 45-23

DROPS Baby 45-23
DROPS 251-15

DROPS 251-15
DROPS 251-16

DROPS 251-16
DROPS Children 48-19

DROPS Children 48-19
Change language:

Video #69, listed in: Learn to knit, Socks and Slippers, Heels, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Linda wrote:

Fijn dat dit filmpje er is, nu begrijp ik dat de losse flap in de hiel geen fout is maar zo hoort.

17.11.2012 - 11:51

Country flag Astrid wrote:

Toppen, nu fattar jag! plötsligt känns det inte så svårt att sticka sockor. :) tack!

31.10.2012 - 15:37

Country flag Mimmie Deelt Safari Munten Uit! wrote:

Ik kan de video slecht volgen ik kan de hak niet. wat voor oplossing zou ik daar voor kunnen vinden.

20.09.2012 - 12:06

Country flag Pam Smith wrote:

Excellent demo...answered all of my heel questions. Thanks!

28.07.2012 - 02:22

Oana wrote:

Great video! I finally understood how to make the heel. Thank you very much!

01.04.2012 - 13:34

Country flag Cristalflowers wrote:

J'ai toujours pas compris , sa me parait compliquer , je desespére , snif

14.02.2012 - 12:17

DROPS Design France :

Bonsoir Cristalflowers, on va vous apporter toute l'aide possible grâce au forum.

15.02.2012 - 21:08

Country flag Irma wrote:

Aka hälavm?

05.02.2012 - 15:44

Country flag Yona wrote:

In the end it seems she's got 9-8-6-6 (which is a bit odd perhaps?)

12.12.2011 - 18:17

Country flag Gitte wrote:

In the end she's got 7-7-6-6 or am I wrong?? She started with 6-6-6-6. I love this site, but this is the only video I find it hard to understand. Greetings to all of you :-)

05.11.2011 - 13:51

Country flag DROPS Design NL wrote:

Hoi Paula. Er is ook 3 video's beschikbaar over hoe u steken kunt opnemen. U neemt de steken op langs de zijkanten van de hiel. Neem het aantal op zoals vermeldt wordt in het patroon. Succes.

15.09.2011 - 10:40

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to knit an old-fashioned square heel on a sock
15:29
How to knit an old-fashioned square heel on a sock

In this DROPS video we show you how to knit an old-fashioned square heel on the socks in DROPS 189-36. We have already knitted the leg and putted the 20 top of foot stitches on a stitch holder (we knit size 35/37). Continue by working stocking stitch back and forth over the heel stitches; on the first row from the right side increase stitches for a better fit as follows: Knit 9 stitches, increase 1 stitch, * knit 2 stitches, increase 1 stitch *, work from *-* a total of 3 times and then knit to end of row = 28 stitches on needle. Continue back and forth with stocking stitch to the measurement written in the pattern and insert 1 marker in middle of row. On the next row from the right side work as follows: Knit 10 stitches, knit together the next 8 stitches 2 and 2, knit the last 10 stitches. Turn and purl back. Knit 1 row from the right side. Now work back and forth from the wrong side to work the heel stitches together. All rows are worked from the wrong side. Turn and purl the first 12 stitches from the wrong side. Make sure that the strand is at the back of the piece and work as follows: LEFT NEEDLE: Knit 2 stitches twisted together, move the knitted-together stitches back onto the left needle and tighten the strand. Do not turn the piece. RIGHT NEEDLE: Insert the left needle into the 2 next stitches on the right needle and pick up the strand and take it around the left needle, then pull the strand through these 2 stitches and drop the 2 stitches from the right needle. Then move the knitted-together stitches back onto the right needle and tighten the strand. Do not turn the piece. Repeat LEFT and RIGHT NEEDLE like this until there are 2 stitches left. Now the heel stitches have been worked together. Place the 2 remaining stitches on the right needle and turn the piece to the right side. These socks are knitted in DROPS Karisma, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to knit with 2 threads to get a stronger heel - knitting tip
5:46
How to knit with 2 threads to get a stronger heel - knitting tip

In this DROPS video we show how to get a stronger heel on a sock by knitting with 2 threads. Use strand inside and outside of ball (or use 2 balls) and work 1 stitch alternately with one and the other strand. This way you get a thicker heel without working with double strand. In the video, we already have knitted the rib and put the stitches mid on top of foot on a stitch holder and we show 2 rows where we knit with 2 strands. These socks are knitted in DROPS Karisma, but in video we use a thicker yarn; DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to knit a short row heel with diagonal shaping to a sock
11:16
How to knit a short row heel with diagonal shaping to a sock

In his DROPS video we show how you can shape your heel diagonally with short rows on a knitted sock. We show the beginning and end of 1st to 4th row, so we skip until we have 8 stitches at the center of the needle and 6 stitches in each side. Put 1 mark. Now work 1 stitch more for each row over the heel. To avoid holes in the transitions, pick up the thread before the stitches that are knit up and turn twisted on the needle. Knit the thread together with the next stitch. Continue like this until all stitches on the heel is knitted. Then knit all over the stitches. You must read the pattern to be able to follow this video properly. You’ll find patterns with this technique by clicking on the pictures below. In the video we use the yarn DROPS Snow.