DROPS Children 49 · Lots of new kid designs!

How to do an Italian cast off in a rib with K1 / P1 without a needle - tubular cast off

In this DROPS video we show how to do an Italian cast off in a rib with K1 / P1 without a needle, also called tubular cast off.

Our sample is a knitted cuff in K1, P1 ribbing.
First you will knit 4 rows where half the sts are worked separate, and this is done by lifting all the P sts and knitting all the K sts. Work like this for 4 rows. Then we separate the sts by putting them on one needle each.
Once that is done make sure both needles are pointing towards the end of the working yarn, which is attached to the needle in the back. Now sew or knit kitchener sts aka grafting sts to join the two sides.

We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.

Patterns using this technique

DROPS 252-15

DROPS 252-15
DROPS 254-22

DROPS 254-22
DROPS 250-6

DROPS 250-6
DROPS 249-4

DROPS 249-4
Change language:

Video #123, listed in: Learn to knit, Cast off, Italian cast off

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Hansson wrote:

När man lyfter aviga maskorna ska man då ha garnet bakom maskan och lyfta eller ska man ha garnet framför den aviga maskan och lyfta?

20.05.2024 - 13:48

DROPS Design :

Hei Hansson. I denne videoen legger man tråden mot seg, slik at den ligger foran vrangmasken. mvh DROPS Design

21.05.2024 - 13:16

Country flag Marianne wrote:

De 4 varven är väl dubbelstickning. Går detta inte att göra med rundsticka…? Undrar/marianne - tacksam för råd/hjälp!

23.01.2024 - 11:57

DROPS Design :

Hei Marianne. Tenker du på å strikke rundt? Ta en titt på videoen: "Hvordan laves en Italiensk aflukning" mvh DROPS Design

29.01.2024 - 08:18

Country flag Claire wrote:

Bonjour, J'ai une petite question: vous dites que l'on peut rabattre ainsi, même sur du jersey sans côtes. Du coup, on ne tricote qu'une maille sur deux en laissant le fil derrière? Je suis sur une fin de pull top down en jersey circulaire, je n'ai donc que des mailles endroit. Merci de votre aide!

20.04.2023 - 11:52

DROPS Design :

Bonjour Claire, pour du jersey, il peut être préférable d'utiliser une autre technique, retrouvez-en parmi nos vidéos: Comment rabattre souplement - 3 façons de faire ou bien Comment rabattre avec le fil en double ou bien encore Comment rabattre avec une aiguille à coudre. Bon tricot!

21.04.2023 - 09:48

Country flag Joanna wrote:

Hoe moet ik een buisafkanting maken bij een rondbreiwerk 2 R/2AV ?

29.12.2022 - 23:06

Country flag Lieve Loos wrote:

Gaat dit ook met 2 rechts 2 averechts?

22.10.2022 - 18:42

DROPS Design :

Dag Lieve,

Ja, dit kun je ook moeten kunnen doen met 2 recht, 2 averecht.

26.10.2022 - 19:38

Country flag Alja Sterenborg wrote:

Doe je dit ook zo bij bijvoorbeeld sokken die je van teen naar de boord hebt gebreid of gebruik je dan een andere techniek?

04.12.2021 - 16:45

DROPS Design :

Dag Alja,

De video geeft een manier van afkanten weer en dit zou inderdaad ook gebruikt kunnen worden bij het afkanten van sokken die van beneden naar boven zijn gebreid. Dat geeft inderdaad een mooie afwerking aan sokken.

06.01.2022 - 11:40

Country flag Marimar wrote:

Bonjour, Pouvez vous me dire si vous avez une video pour savoir comment rabattre en tubulaire en rond ? Mervi

13.11.2020 - 21:27

DROPS Design :

Bonjour Mme Marimar, vous pouvez probablement procéder de la même façon: divisez les mailles en tricotant 1 maille sur 2 un tour puis les autres mailles au tour suivant et ceci pendant 4 tours au total (attention à ce que votre fil ne soit pas visible sur l'endroit quand vous glissez les mailles), puis assemblez les mailles comme dans la vidéo. Bon tricot!

16.11.2020 - 11:09

Country flag Yvonne wrote:

Wat krijg je zo een mooie elastische rand aan je breiwerk. Ik gebruik de buismethode ook om steken op te zetten, ben blij dat ik dit geleerd heb.

03.10.2020 - 14:20

Country flag HCL wrote:

Sehr schön! Wie bestimmt man denn die benötigte Fadenlänge? Es wäre doch sicher ganz schlecht, wenn man zu kurz abgeschnitten hat. Danke!

25.05.2020 - 16:51

DROPS Design :

Liebe HCL, die benötige Fadenlänge muss ca 3 Mal die länge von den fertigen Naht sein. Viel Spaß beim stricken!

26.05.2020 - 09:12

Country flag Simona Campus wrote:

Buongiorno, mi potreste spiegare come chiudere un bordo coste 2/2 con tubulare? Grazie in anticipo

08.02.2020 - 10:49

DROPS Design :

Buonasera Simona, può lavorare nello stesso modo anche per le coste 2/2. Buon lavoro!

17.11.2020 - 19:11

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to do an Italian cast off with Knit 1 and Purl 1
4:58
How to do an Italian cast off with Knit 1 and Purl 1

In this DROPS video we show how to do an Italian cast off to a rib with knit 1 / purl 1 by sewing the cast off edge with needle and thread. With this technique we get an elastic cast off that is perfect for example on toe up socks, edge around neck, a shawl edge or sleeve edges when working top down. Cut yarn long enough for your cast off, approx 3-4 times the length of the edge you are casting off. Part 1: Start from the right side (the first stitch should be a knit stitch). Insert the needle into the 1st stitch as if to knit, lift the stitch off the needle, insert the needle into the 2nd stitch on the left needle (= knit stitch) as if to purl. Pull the thread through these 2 stitches (= 1 stitch cast off). Part 2: Insert the needle into the 1st stitch (purl stitch) as if to purl and lift the stitch off the needle, then insert the needle from the back side between the 1st and 2nd stitches and insert the needle through the 2nd stitch (purl stitch) as if to knit, pull the thread completely through the 2 stitches. Repeat Part 1 and Part 2 until all the stitches have been cast off. For each time Part 1 and Part 2 have been completed, 1 stitch is cast off. We use the yarn DROPS Snow in the video. This technique can be used in many patterns; you’ll find pattern by clicking on the pictures under:
Video thumbnail for Italian cast off – Knit 2 / Purl 2
6:34
Italian cast off – Knit 2 / Purl 2

In this DROPS video we show how to do an Italian cast off in a piece work with Knit 2 Purl 2. Before starting the cast off, work 1 round where 2 knit - 2 purl becomes 1 knit - 1 purl. Cut yarn long enough for your cast off, approx 4 times the length of the edge you are casting off. 1) Insert the needle into the 1st stitch (knit stitch) as if to knit and slip the stitch of needle. 2) Insert needle into 2nd stitch (knit stitch) as if to purl. 3) Insert needle into 1st stitch (purl stitch) as if to purl, lift the stitch off (the thread is now at the back of the work). From the back, insert the needle between 1st and 2nd stitches. 4) From the front, insert the needle into the purl stitch (2nd stitch). Repeat from the beginning. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern where you can use this technique by clicking on the picture below.
Video thumbnail for How to do an Italian cast off in the round
15:52
How to do an Italian cast off in the round

In this DROPS video we show how to cast off by sewing an Italian cast off to a rib with 1Knit 1Purl in the round. Before we start casting off, we work 4 rounds where the knit stitches and the purl stitches are worked separately. In the 1st and 3rd round, work the knit stitches, while the purl stitches are loosely lifted off as if they are to be worked purl with the thread in front. In the 2nd and 4th round work the purl stitches and lift the knit stitches loosely off as if they are to be purl. We use a stitch marker to show the beginning of the round, but when we start casting off, we put a stitch marker in the 1st knit stitch and in the 1st purl stitch. Cut the thread, the thread end to be sewn with must be at least 4 times as long as the piece to be cast off. Now the casting off part start. * Insert the needle into the 1st knit stitch as if to knit, pull the thread through and lift the stitch off the needle. Insert the needle into the 2nd knit stitch as if to purl and pull the thread through, let this stitch sit on the needle. Insert the needle from the right in the 1st purl stitch and towards you, pull the thread through and remove the stitch from needle. Insert the needle from the back between the next 2 stitches, turn the needle and insert the needle back, but then in the purl stitch as if to knit and pull the thread through. Repeat from * around until there are 2 stitches left, put the first 2 stitches (stitches with markers), on needle and continue casting off. Since the thread has already been through the first 2 stitches at the beginning of the round 1 time, sew these stitches only 1 time through at the end. Fasten the thread to the back. We use the yarn DROPS Snow in the video. You’ll find patterns where you can use this technique by clicking on one off the pictures below.
Video thumbnail for How to do an Italian cast off, Knit 1 ( twisted ) / Purl 1
6:26
How to do an Italian cast off, Knit 1 ( twisted ) / Purl 1

In this DROPS video we show how to do an Italian cast off to a rib with knit 1, purl 1, but in the cast off the knit 1 becomes knit 1 twisted. With this technique we get an elastic cast off that is perfect for example on toe up socks, edge around neck, a shawl edge or sleeve edges when working top down. Cut yarn long enough for your cast off, approx 4 times the length of the edge you are casting off. Start by locking the first stitch like this: Insert the needle into the 1st stitch as if to purl and tighten. Do not slip the stitch of needle. Insert the needle from the back between the 1st and 2nd stitches so that the thread comes to the front, then insert the needle into the purl stitch. Then insert the needle into the 1st stitch as if to knit, lift the stitch off the needle. Now the cast off starts: 1) When there is a purl stitch to sew off, sew as follows: Insert needle into 2nd stitch (knit stitch) as if to purl, insert needle into 1st stitch (purl stitch) as if to knit, lift the stitch off (the thread is now at the back of the work). 2) When there is a knit stitch to sew off, sew as follows: From the back, insert the needle between 1st and 2nd stitches. From the front, insert the needle into the purl stitch (2nd stitch), also from the right side, insert the needle into the 1st stitch as if to knit and slip the stitch of needle. Repeat explanation 1) and 2) until the casting off is completed. We use the yarn DROPS Snow in the video. You can find patterns where this technique can be used by clicking the pictures below.
Video thumbnail for How to make a sewn cast off
2:26
How to make a sewn cast off

In this DROPS video we show how to make a sewn cast off, an elastic cast off that is perfect for example on toe up socks, edge around neck, a shawl edge or sleeve edges when working top down. Cut yarn long enough for your cast off, approx 4 times the length of the edge you are casting off. *With darning needle enter the first two stitches from right to left, pull yarn through, then enter the first stitch only from left to right, pull yarn through and then drop this stitch off the needle. Repeat from *. Make sure to make the tension match the rest of your knitting on the piece.
Video thumbnail for How to work with 2 circular needles with different needle sizes
9:10
How to work with 2 circular needles with different needle sizes

In this DROPS video we show you how to work rib in a stocking stitch piece. To allow the rib to tighten, work the rib with a smaller needle size than the rest of the piece. Use both ends of the needle when working.