DROPS / 195 / 13

Winter Tears by DROPS Design

Knitted shawl in DROPS Fabel. Piece is knitted sideways with stripes, drops and leaves.

DROPS design: Pattern fa-415
Yarn group A
----------------------------------------------------------

SHAWL:
Measurements: Length on the middle: approx. 59 cm Width at top: approx. 184 cm
Materials:
DROPS FABEL from Garnstudio (belongs to yarn group A)
250 g colour 602, silver fox
50 g colour 114, light pearl grey

----------------------------------------------------------
ACCESSORIES FOR THE PIECE:

KNITTING TENSION:
21 stitches in width and 41 rows vertically in garter stitch = 10 x 10 cm.

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 3.5 mm, length 60 cm.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to larger needles. If you have too few stitches on 10 cm switch to smaller needles.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

75% Wool, 25% Polyamide
from 2.20 £ /50g
DROPS Fabel uni colour DROPS Fabel uni colour 2.20 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Fabel print DROPS Fabel print 2.30 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Fabel long print DROPS Fabel long print 2.50 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 13.20£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

GARTER STITCH (back and forth):
1 ridge = knit 2 rows.

DROP:
NOTE: Tighten yarn at every turn to avoid holes.
Knit 10, insert a marker here.
Turn and knit 9.
Turn and knit 8.
Turn and knit 7.
Turn and knit 6.
Turn and knit 5.
Turn and knit 4.
Turn and knit 3.
Turn and knit 2.
Turn and knit 6.
Turn and work until marker that was inserted after the first 10 stitches, (the marker can now be removed and used at next drop).

LEAF:
NOTE: Work leaf at the end of row seen from right side! Row 1 (= wrong side)
Work 3 stitches.
Turn and work 2 stitches, work 2 stitches in last stitch (i.e. work in front and back loop of stitch).
Turn and work 6 stitches.
Turn and work 5 stitches, work 2 stitches in last stitch.
Turn and work 9 stitches.
Turn and work 8 stitches, work 2 stitches in last stitch.
Turn and work 12 stitches.
Turn and work 11 stitches, work 2 stitches in last stitch.
Turn, cast off first stitch (= 1 stitch on needle), work 9 stitches.
Turn and work 10 stitches.
Turn, cast off first stitch (= 1 stitch on needle), work 6 stitches.
Turn and work 7 stitches.
Turn, cast off first stitch (= 1 stitch on needle), work 3 stitches.
Turn and work 4 stitches.
Turn, cast off the first stitch.
There are now 1 stitch light pearl grey on right needle and 8 stitches in leaf + the other stitches on needle with light pearl grey on left needle.

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

SHAWL - SHORT OVERVIEW OF THE PIECE:
Worked back and forth on circular needle from one side along bottom edge and diagonally over to tip in the other side. Knit all rows.

SHAWL:
1ST SECTION:
Cast on 210 stitches on circular needle size 3.5 mm with silver fox. Knit 2 rows (1st row = right side). Now work as follows:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 210 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 208 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 4 times in total (= 16 rows).
In 1st section 4 stitches have been increased at the end of row and 12 stitches decreased at beginning of row seen from right side = 202 stitches.
Insert a marker thread before the last 6 stitches on needle seen from right side (= 196 stitches before marker thread and 6 stitches after marker thread). Marker thread follows upwards in piece and should help to make sure that the pattern/drops are in the correct place. On the rows where drops are worked there should always be a drop or 15 stitches in garter stitch BEFORE marker thread (seen from right side). REMEMBER THE KNITTING TENSION!
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 17 (= right side): Knit all stitches.
ROW 18 (= wrong side): Work LEAF – read explanation above, knit 20 (= 21 stitches on right needle), * work DROP – read explanation above, knit 20 *, work from *-* 6 times in total, knit 1.
ROW 19: Switch to silver fox and knit all stitches.
ROW 20: Knit all stitches.

2ND SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 202 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 200 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 7 times in total (= 28 rows) = 188 stitches.
Now work as follows:
ROW 29: Knit 2 together (somewhat loosely), work the remaining stitches on needle (= 1 stitch decreased) = 187 stitches.
ROW 30: Knit all stitches.
ROW 31: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 185 stitches.
ROW 32: Knit all stitches.
In 2nd section 7 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 185 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 12 (= 13 stitches on right needle), * work DROP, knit 20 *, work from *-* 5 times in total, knit 22.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

3RD SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 185 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 183 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 8 times in total (= 32 rows).
In 3rd section 8 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 169 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 35 (= 36 stitches on right needle), * work DROP, knit 20 *, work from *-* 4 times in total, knit 13.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

4TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 169 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 167 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 7 times in total (= 28 rows) = 155 stitches.
Now work as follows:
ROW 29: Knit 2 together (somewhat loosely), work the remaining stitches on needle (= 1 stitch decreased) = 154 stitches.
ROW 30: Knit all stitches.
ROW 31: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 152 stitches.
ROW 32: Knit all stitches.
In 4th section 7 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 152 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 27 (= 28 stitches on right needle), * work DROP, knit 20 *, work from *-* 4 times in total, knit 4.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

5TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 152 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 150 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 8 times in total (= 32 rows).
In 5th section 8 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 136 stitches. Move the marker thread before the last 6 stitches on needle seen from right side.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 20 (= 21 stitches on right needle), * work DROP, knit 20 *, work from *-* 3 times in total, knit 25.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

6TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 136 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 134 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 7 times in total (= 28 rows) = 122 stitches.
Now work as follows:
ROW 29: Knit 2 together (somewhat loosely), work the remaining stitches on needle (= 1 stitch decreased) = 121 stitches.
ROW 30: Knit all stitches.
ROW 31: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 119 stitches.
ROW 32: Knit all stitches.
In 6th section 7 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 119 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 12 (= 13 stitches on right needle), * work DROP, knit 20 *, work from *-* 3 times in total, knit 16.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

7TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 119 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 117 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 8 times in total (= 32 rows).
In 7th section 8 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 103 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 35 (= 36 stitches on right needle), * work DROP, knit 20 *, work from *-* 2 times in total, knit 7.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

8TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 103 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 101 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 7 times in total (= 28 rows) = 89 stitches.
Now work as follows:
ROW 29: Knit 2 together (somewhat loosely), work the remaining stitches on needle (= 1 stitch decreased) = 88 stitches.
ROW 30: Knit all stitches.
ROW 31: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 86 stitches.
ROW 32: Knit all stitches.
In 8th section 7 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 86 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 27 (= 28 stitches on right needle), * work DROP, knit 20 *, work from *-* 1 time in total, knit 28.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

9TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 86 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 84 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 8 times in total (= 32 rows).
In 9th section 8 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 70 stitches. Move marker thread before the last 6 stitches on needle seen from right side.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 20 (= 21 stitches on right needle), * work DROP, knit 20 *, work from *-* 1 time in total, knit 19.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

10TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 70 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 68 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 7 times in total (= 28 rows) = 56 stitches.
Now work as follows:
ROW 29: Knit 2 together (somewhat loosely), work the remaining stitches on needle (= 1 stitch decreased) = 55 stitches.
ROW 30: Knit all stitches.
ROW 31: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 53 stitches.
ROW 32: Knit all stitches.
In 10th section 7 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 53 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33: Knit all stitches.
ROW 34: Work LEAF, knit 12 (= 13 stitches on right needle), * work DROP, knit 20 *, work from *-* 1 time in total, knit 10.
ROW 35: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

11TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 53 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), knit the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 51 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row 8 times in total (= 32 rows).
In 11th section 8 stitches have been increased at the end of row and 24 stitches decreased at beginning of row seen from right side = 37 stitches.
Switch to light pearl grey and work a stripe with short rows as follows:
ROW 33 (= right side): Knit all stitches.
ROW 34 (= wrong side): Work LEAF, the knit the remaining stitches on needle.
ROW 5: Switch to silver fox and knit all stitches.
ROW 36: Knit all stitches.

12TH SECTION:
ROW 1 (= right side): Knit 2 together (somewhat loosely), work until 1 stitch remains on needle, 1 yarn over, knit 1 = 37 stitches.
ROW 2 (= wrong side): Knit all stitches, knit yarn over twisted to avoid holes.
ROW 3: Knit the first 2 stitches together (somewhat loosely), work the next 2 stitches together (somewhat loosely), work the rest of row (= 2 stitches decreased) = 35 stitches.
ROW 4: Knit all stitches.
Repeat 1st-4th row until 9 stitches remain on needle. Knit 2 together, knit 5, knit 2 together = 7 stitches. Cast off. Fasten off.

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 195-13) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (7)

Hatice 18.09.2019 - 15:30:

Is there a video to show how to make this shawl?

DROPS Design 18.09.2019 kl. 15:46:

Dear Mrs Hatice, there is no video showing how to work this shawl, but you will find some videos showing you how to work the techniques used here = short rows worked for the shawl, the drops and the leaves (you have to increase/cast off stitches for leaves in the short rows, as explained in the written pattern). . Happy knitting!

Claudia 03.10.2018 - 18:09:

Schade, dass man an einer langen Seite beginnt. Wäre es umgekehrt, könnte man stricken bis man kein Garn mehr hat. So traue ich mich nicht, mit einer etwas geringeren Garnmenge zu beginnen.

Mosie 08.08.2018 - 00:39:

Name suggestion: Stratus (the line pattern reminds me of stratus clouds)

Elżbieta 20.07.2018 - 20:26:

Świetne połaczenie kolorystyczne i ciekawy wzór

Gabi 11.07.2018 - 13:01:

Oh ich liebe Tücher. Dieses ist schick, ich liebe es

Carmen 03.07.2018 - 21:40:

Ziemlich nah an einem Modell einer anderen Designerin !!!

Michaela 11.06.2018 - 15:25:

Oh, das ist ein schönes Tuch. Ich bin schon sehr gespannt auf die Anleitung

Post a comment to pattern DROPS 195-13

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.