DROPS Children 49 · Lots of new kid designs!

How to knit magic loop

In this DROPS video we show how you can knit the magic loop technique.

If a pattern requests both double pointed needles and circular needle in the same size, then you can use a circular needle and work with the magic loop technique.

This means you can knit a smaller tubular piece using a circular needle instead of double pointed needles.
The circular needle should be long (at least 80 cm) and have a flexible cord. Cast on your number of sts and push the sts to the middle of the cord. Separate and pull out the cord in the middle of the sts. Slide sts to the needle tips each side, make sure sts don't get twisted.
Your working yarn is on the back needle and you start working the sts on your front needle. Draw out the back needle to work the front needle. When front needle is done, turn work and slide sts back to the other tip and work that side the same way. Continue in the round, make sure to always pull out the needle at the side where you have the working yarn.

You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.

Patterns using this technique

DROPS 251-11

DROPS 251-11
DROPS 251-10

DROPS 251-10
DROPS 251-12

DROPS 251-12
DROPS Children 48-14

DROPS Children 48-14
Change language:

Video #120, listed in: Learn to knit, Knitting tips & tricks, Other knitting tips & tricks

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Lenie wrote:

Kun je 2 mouwen tegelijk breien in magic loop

28.12.2015 - 21:55

DROPS Design :

05.01.2016 - 14:17

Country flag Ilona Krause wrote:

Hey, antworte hier auf Anja(19.01.15): Die "Löcher" lassen sich auch bei ganz dünnen(!) Nadelstärken vermeiden, wenn man bei jedem Nadelwechsel nach dem Stricken der ersten drei, vier Maschen (vor dem Weiterstricken) das Seil der rechten Nadel noch einmal komplett stramm durch diese Maschen zieht und so tut, als beginne erst hier die nächste (linke) Nadel.

24.09.2015 - 06:06

Mariana wrote:

Gracias y felicitaciones por el magnifico video de como usar el método de Magic loop al modo continental... atte, Mariana

25.05.2015 - 02:08

Country flag Anja wrote:

Bin auch absoluter Fan dieser Methode, finde aber, dass man sie nicht bei dünner Wolle (also einer Nadelstärke unter 4) verwenden sollte, weil das Seil die Maschen an der Stelle des Loops doch sehr aufdehnt und man dort am Ende ein Linie aus sehr weiten Maschen sieht.

19.01.2015 - 08:58

Country flag Ester wrote:

Grazie! Finalmente ho capito è imparato la tecnica magic loop

28.12.2014 - 17:33

Country flag Louise wrote:

Hoe weet ik nu dat ik een hele toer gebreid heb?

24.01.2014 - 22:00

DROPS Design :

Als u alle steken een keer gebreid hebt. Eventueel kunt u een markeerder in de eerste steek hangen.

16.10.2014 - 10:12

Country flag Vivian Meulman wrote:

Zeer duidelijke video, ook voor linkshandigen, ik ben ook linkshandig en heb me zelf leren breien toen ik 6 jaar was, de juf wilde en kon mij niet helpen, nu zie ik de video, en zo brei ik dus al mijn hele leven

07.01.2014 - 16:33

Country flag Jeanne wrote:

Kan er een uitleg komen voor rondbreien voor mensen zoals ik linkshandig zijn. duidelijke video maar ik kom er niet uit.

27.10.2013 - 17:28

Country flag Mariska wrote:

Hartelijk dank voor de instructievideo's en vele tips!

14.02.2013 - 19:26

Country flag Brigitte Heinle wrote:

Da macht Sockenstricken Spass. Wir nennen es Wunderschlinge. Aber Magic Loop ist klasse. Nadelspiel ist für mich Vergangenheit.

20.01.2013 - 09:07

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work German Short Rows – with a double stitch round on the needle
8:41
How to work German Short Rows – with a double stitch round on the needle

German short rows = The work is turned in the middle of a row. When working short rows, there will be a small hole - this can be closed by tightening the thread or using the German short row technique. Row 1 (= right side): Knit until where the piece is to be turned, turn, when it is knitted further there will be a small hole at the turn - this hole can be closed like this: Row 2 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch (with a stitch and a thread). Purl until where the work is to be turned. Turn the work. Row 3 (= right side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before knitting the next stitch = the first stitch on the right needle has now become a double stitch. Knit until the double stitch from the previous row and knit the double stitch so that the thread that was placed over the needle and the stitch is knitted together = 1 stitch. Knit until where the work is to be turned. Turn the work. Row 4 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch. Purl until the double stitch from the previous row and purl the double stitch so that the thread that was placed over the needle and the stitch is purled together = 1 stitch. Purl until where the work is to be turned. Turn the work. Repeat 3rd and 4th row. We use the yarn DROPS Snow in the video. This technique can be used in many patterns; you’ll find pattern by clicking on the pictures under:
Video thumbnail for How to work German Short Rows – with a double stitch back and forth on the needle
5:17
How to work German Short Rows – with a double stitch back and forth on the needle

German short rows = The work is turned in the middle of a row. When working short rows, there will be a small hole - this can be closed by tightening the thread or using the German short row technique. Row 1 (= right side): Knit until where the piece is to be turned, turn, when it is knitted further there will be a small hole at the turn - this hole can be closed like this: Row 2 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch (with a stitch and a thread). Purl until where the work is to be turned. Turn the work. Row 3 (= right side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before knitting the next stitch = the first stitch on the right needle has now become a double stitch. Knit until the double stitch from the previous row and knit the double stitch so that the thread that was placed over the needle and the stitch is knitted together = 1 stitch. Knit until where the work is to be turned. Turn the work. Row 4 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch. Purl until the double stitch from the previous row and purl the double stitch so that the thread that was placed over the needle and the stitch is purled together = 1 stitch. Purl until where the work is to be turned. Turn the work. Repeat 3rd and 4th row. We use the yarn DROPS Snow in the video. This technique is used in several patterns - you can find patterns by clicking on the pictures below:
Video thumbnail for How to knit up stitches for the neck to a jumper with European shoulder
6:35
How to knit up stitches for the neck to a jumper with European shoulder

In this DROPS video we show how to knit up stitches around the neck to a jumper with a European shoulder, using a knitting needle or a crochet hook. Then follow the description in the pattern. There are many different ways to work a rib (e.g knit 1 / purl 1, knit 2 / purl 2, knit 1 twisted / 1 purl etc.). And you can work a single neck, double neck or a high neck. In this video we work a double neck with a rib worked like this: knit 2, purl 2, cast off with knit over knit and purl over purl and then fold the neck double to the inside and fasten down. In this video we work with 2 yarn qualities: DROPS Lima colour no. 9029 sage green and DROPS Kid-Silk colour no. 45 soft mint, needle size 5 mm. You must read a pattern to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to work a sleeve to a garment with European shoulder with short rows
13:07
How to work a sleeve to a garment with European shoulder with short rows

In this DROPS video we show how to knit up stitches to one sleeve, working short rows, decrease under the sleeve, increase stitches before the rib, switch to smaller needle and a little bit of the cast off (knit over knit, and purl over purl). Insert 1 marker on the top of armhole (NB: This is not where the stitches were knitted up for the front piece, but a few cm down on the front piece, this is the middle of the shoulder). Start in the middle of the new stitches cast on under sleeve and pick up the number of stitches it says in the pattern around the armhole – adjust so that there are the same number of stitches along armhole on each side of the marker. Now work stocking stitch back and forth with short rows over sleeve cap, to give the sleeve a better fit. Then work in the round with decreases under the sleeve. Follow the description in the pattern on how to work short rows, how and how many decreases, how long the sleeve should be and the rib. In this video we work with 2 yarn qualities: DROPS Lima colour no. 9029 sage green and DROPS Kid-Silk colour no. 45 soft mint, needle size 5 mm. You must read a pattern to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to work a simple v-neck
8:36
How to work a simple v-neck

In this DROPS video we show how to work a simple v-neck in rib with 1 knit / 1 purl. The same technique can be used in the rib when knit 2 / purl 2. First, we show how we knit up stitches, then we knit all the stitches from the wrong side, then we work the rib and at the same time on every 2nd row we decrease 2 stitches mid-front as follows: Work until there is 1 stitch left before the knitted stitch mid-front, slip 2 stitches as if to knit together, knit 1, pass the 2 slipped stitches over the knitted stitch (= 2 stitches decreased). This gives you a neat edge and the knitted stitch follows in a straight line. We use the yarn DROPS Snow in the video. You must read a pattern with this technique to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to work a double knitted V-neck with knit 2 / purl 2
9:57
How to work a double knitted V-neck with knit 2 / purl 2

In this DROPS video we show how we work a double knitted V-neck. The neck should be worked in the round, but we only show parts of what happens on the front piece. We are showing: 1) Time: 00.04-01.36. How to put the 2 mid-stiches on a needle and knit, and at the same time knit up stitches from the right side on the neckline. Insert 1 marker between the 2 mid-stitches; these stitches are always knitted. Knit up 2 more stitches on the left side, but the number of stitches must be divisible by 4. 2) Time: 01:37 -03:12. Count back to the beginning of the round so the mid-stitches are knitted when working rib. Work rib (knit 2, purl 2), until there are 2 stitches left before the marker, knit 2 together (even it one stitch should have been a purl stitch), then slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch = 2 knitted stitches mid-front, purl 1 stitch and continue the rib to the end of the round. 3) Time: 03:13 -04:10. Decrease like this on the next round. Above the 6 middle stitches, there will then only be knitted stitches. 4) Time: 04:12 -04:29. Work in the round and decrease on every round until the finish measurement. 5) Time: 04:30-05:52. Work 1 round without decreasing = folding edge. 6) Time: 05:54-08:21. Now increase on each side of the mid-stitches every round as follows: Work rib until there is 1 stitch left before the marker, make 1 yarn over, knit 2 (mid-stitches), 1 yarn over and work rib to the end of the round; yarn overs are worked twisted on the next round. 7) Time: 08:25-09:06. Continue to increase until the finish measurement. Cast off with knit over knit and purl over purl. 8) Time: 09:10-09:38. Fold the neck double to the inside and sew a couple of stitches to keep it in place. 9) Time: 09:39-09:56. Finish the double knitted V-neck. We use the yarn DROPS Snow in the video. You must read a pattern with this V-neck to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.