DROPS / 102 / 2

Enchantment by DROPS Design

A set of: DROPS scarf with flounces, beret and mittens in ”Alpaca” and ”Vivaldi”.

SCARF
Size: one-size
Length: approx 150 cm
Width: approx 25 cm
Materials: DROPS Alpaca from Garnstudio
200 g colour no. 4434, purple/violet mix
and use: DROPS Vivaldi from Garnstudio
100 g colour no. 24, light violet

DROPS knitting needles size 5 - or needle size needed to make 17 sts x 22 rows in stocking sts with 1 thread of each quality on 10 x 10 cm.

(Continue to pattern...)

Tags:

pattern type: hats, scarves, sets, pattern/technique: flounce, shape: short rows, slouch hat,

Tips & Help

All our patterns include tutorial videos that can help you finish your project in no time!

See them here!

You can also find step by step tutorials for the most common knitting and crochet techniques in the DROPS Lessons!

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
Turns:
Make turns in your work to give the scarf flounces.
Knit short rows like this:
1st row (RS): Knit from 1st to 6th MT (= marking thread), turn.
The markers are no 1-6 seen from the RS. From WS they are no 6-1.
2nd row: Knit to 5th MT,
3rd row: Turn and knit back to the 6th MT.
4th row: Knit to 4th MT
5th row: turn and knit back to the 6th MT.
6th row: Knit as 2nd row.
7th row: Knit as 3rd row.
8th row: Knit as 4th row.
9th row: Knit as 5th row.
10th row: Knit from 6th to 1st MT.
11th row: turn and knit back to 6th MT.
12th to 19th row: Knit as 2nd to 9th row.
20th row: Knit from 6th to 1st MT, turn.
21st row: Knit to 2nd MT.
22nd row: turn and knit back to 1st MT.
23rd row: Knit to 3rd MT.
24th row: turn and knit back to 1st MT.
25th row: Knit as 21st row.
26th row: Knit as 22nd row.
27th row: Knit as 23rd row.
28th row: Knit as 24th row.
29th row: Knit from 1st to 6th MT.
30th row: turn and knit back to 1st MT.
31st to 38th row: Knit as 21st to 28th row.
Repeat from 1st row.

Knitting Tip: After every turn, slip the first st, tighten thread and knit back, this is to prevent holes at every turn.

SCARF
The whole scarf is knitted in garter stitch. This means you knit every row until finished measurement.
Cast on 42sts on needle size 5mm with 1 thread of each quality. Put 6 marking threads in your work like this:
1st marking thread (MT) in the beginning of the needle.
2nd MT after 7 sts.
3rd MT after 15 sts.
4th MT after 27 sts.
5th MT after 35 sts.
6th MT at the end of the needle.
Knit with turns – read above – and also read knitting tip. Continue until work measures approx 150 cm, make sure to end after a 38th row with turns. Cast off loosely.



BERET
Head measurement: approx. 53/55 – 56/58 cm
Materials: DROPS Alpaca from Garnstudio
50-100 g colour no. 4434, purple/violet mix
and use: DROPS Vivaldi from Garnstudio
50-50 g colour no. 24, light violet

DROPS double pointed needles and circular needle (40 cm) size 5 mm - or needle size needed to make 17 sts x 22 rows in stocking sts with 1 thread of each quality on 10 x 10 cm.

Increase: Inc 1st in every st by knitting the 4 threads in 1 st together 2 by 2 to 2 sts. This means that 1 st with 4 threads becomes 2 sts with 2 threads (= the number of sts are doubled).

Beret: Knit round on a circular needle. Cast on 74-80 sts on circular needle size 5 mm with 2 threads of each quality (= 4 threads). K 3 rows, and then P 1 row. Continue in rib 1K/ 1P until work measures approx 5 cm. K 1 row then P 1 row. Change to 1 thread of each quaility (= 2 threads), knit 1 row in stocking sts at the same time as you inc 1 st in every st – read expl. above = 148-160 sts on the needle.
Continue in stocking sts until work measures 11-12 cm. Now dec 4-0 sts evenly = 144-160 sts. Then put 18-20 marking threads (MT) with 8 sts in between each MT. Continue in stocking sts at the same time as you dec 1 st before every MT every 4th row a total of 6 times = 36-40 sts. Knit 2 rows in stocking sts. On following row knit all sts together 2 by 2 = 18-20 sts. Pull 1 thread through remaining sts. Pull tight together and fasten. The beret measures about 22-23 cm.



MITTENS
Size: S/M – L/XL
Material: DROPS Alpaca from Garnstudio
50-50 g colour no. 501, light grey
and use: DROPS Vivaldi from Garnstudio
50-50 g colour no. 06, off white

DROPS double pointed needles size 4 mm - or needle size needed to make 19 sts x 25 rows stocking sts with 1 thread of each quality on 10 x 10 cm.

Left mitten: Knit in the round on double pointed needles. Cast on 42-48 sts with 1 thread of each quality on double pointed needles size 4 mm. Knit 2 rows, continue in rib = K3 / P3. When work measures 10 cm knit 1 row – at the same time dec evenly to 36-42 sts. Then P 1 row, K 1 row and P 1 row. Continue in stocking sts. At the same time when work measures approx. ca 12 cm starts the inc for thumb wedge. Inc 1 sts on each side of second last sts on round – to inc: yo, to avoid holes at inc ensure to knit into back of sts on next round. Inc on every 3rd round 4-5 times in total = 9-11 thumb sts and 44-52 sts in total. When piece measures 17-18 cm slip thumb sts + 1 st on each side (= 11-13 m) on 1 thread or stitch holder. Cast on 1 new st behind thumb sts = 34-40 m. Continue round in stocking sts until piece measures 21-22 cm. Slip 15-17 sts on top of hand onto thread or stitch holder, keep next 6-8 sts on the needle and slip last 13-15 sts inside hand on another thread or stitch holder.

Little finger: = 6-8 m. Cast on 2 new sts toward sts on thread = 8-10 m. Knit stocking sts in the round for 5½ -6½ cm, then knit all sts tog 2 by 2. Cut yarn and pull through remaining sts, pull tog.

Hand: Slip sts from threads back on needle, gather an extra 2 sts up towards little finger = 30-34 sts. Knit 2 rounds stocking sts. Keep 2 sts that were gathered up together towards little finger + 4-5 sts on each side of these on needle. Slip remaining sts back on separate threads or stitch holders (11-12 sts on top of hand and 9-10 sts inside hand).

Ring finger: = 10-12 m. cast on 1 new sts towards sts on threads = 11-13 sts. Knit stocking sts in the round for approx 7-8 cm, then knit all sts tog 2 by 2. Cut yarn and pull through remaining sts, pull tog.

Middle finger: Slip 5-6 sts from thread or stitch holder on top of hand + 4-5 sts from thread or stitch holder inside hand back on needle, pick up furter 2 sts towards ring finger and cast on 1 new st toward sts on thread or stitch holders = 12-14 sts. Knit stocking sts in the round for approx 7½-8½ cm, then knit all sts tog 2 by 2. Cut yarn and pull through remaining sts, pull tog.

Index finger: Slip remaining 11-11 sts from thread or stitch holder back on needle, pick up further 2-3 sts towards middle finger = 13-14 sts. Knit stocking sts in the round for approx 6½-7½ cm, then knit all sts tog 2 by 2. Cut yarn and pull through remaining sts, pull tog..

Thumb: Slip sts over thumb wedge onto needle and pick up 3 additional sts in edge behind thumb sts = 14-16 sts. Knit stocking sts in the round for approx 5½-6 cm, then knit all sts tog 2 by 2.. Cut yarn and pull through remaining sts, pull tog.

Right mitten: Knit like left, but reversed, i.e. inc for thumb on each side of 2nd sts of round in stead of second last sts.

Do you need some help? Here's some tutorial videos that can help you!

For further pattern help, please contact the store where you bought the yarn. Having bought DROPS yarn, you are guaranteed to receive qualified help from a store specializing in the DROPS patterns.

All patterns are carefully reviewed, but we must make reservation for possible mistakes. All patterns are translated from Norwegian and you can always check the original pattern for measurements and calculations.

If you think you have found an error in the pattern, please post your remark or question in our Comments section. Go to original pattern for design DROPS 102-2.