DROPS Super Sale - SAVE 30% on 5 wonderful yarns!

How to knit a thumb on a mitten

In this DROPS video show how you can knit a thumb for a mitten.

First we show how to first increase for the thumb gusset by making 1 yo each side of a marked stitch, on next round work yo's in back loop to avoid holes.
On following round repeat inc and then work a couple of rounds in stockinette (or as indicated in the pattern).
When gusset is done put all inc sts on a cable needle or waste yarn, cast on a new stitch (or number of sts indicated in pattern) behind these sts and continue in the round.

When hand is done put back the thumb sts on a needle, pick up sts in the edge behind these and knit thumb in the round. At desired length K2 tog all the way round. Cut the thread and pull it through remaining sts, tighten and fasten.

You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.

Patterns using this technique

DROPS 234-17

DROPS 234-17
DROPS 234-58

DROPS 234-58
DROPS 234-57

DROPS 234-57
DROPS 234-56

DROPS 234-56
Change language:

Video #134, listed in: Learn to knit, Accessories, Mittens & Gloves

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Natalie wrote:

Un grand merci. J'ai enfin compris grâce à vous.

30.07.2015 - 10:59

Country flag Sara wrote:

Sehr schönes Video. Was mich allerdings brennend interessiert ist jedoch: Welche Wolle verwendet ihr? Finde die Farbe wunderbar aber finde sie nicht.

20.02.2014 - 21:21

DROPS Design :

Liebe Sarah, in unseren Videos stricken wir in der Regel mit Eskimo, Farbe 29.

19.10.2014 - 11:16

Country flag Anna wrote:

Wie wurde die Spitzenabnahme des Hauptteils gemacht?

25.10.2013 - 20:08

Garnstudio Deutschland :

Liebe Anna, für den Hauptteil des Fäustlings gehen Sie bitte auf eine Anleitung für einen Fausthandschuh. In diesem Video geht es nur um den Daumen.

30.10.2013 - 08:00

Tineke Haitsma wrote:

L.s., ik brei een want (jaquard) met breinaalden 3 zonder knop volgens een patroon van u, mijn vraag is nu; aangezien ik niet rondbrei, moet ik de meerderingen voor de duim in dea averechtse pen doen. Antwoord: u mindert volgens patroon, als u niet in de rondte breit en u mindert volgens patroon elke naald dan is dat inderdaad ook aan de acherkant.

16.10.2013 - 19:00

Maria Lúcia Rocha wrote:

Obrigada super facil

29.06.2013 - 00:01

Country flag Inger Helen wrote:

Kjempebra side

23.01.2013 - 11:54

Country flag Martha wrote:

Ich habe schon etliche Handschuhe stricken können, weil ich dank eurer super, leichtverständlichen Anleitung endlich kapiert habe wie man den Daumen strickt, herzlichen dank!!!

13.01.2013 - 19:41

Country flag Mamikikou wrote:

Bravo! mille fois bravo!!!! pour vos modèles et vos vidéos qui vont mettre du coeur à l'ouvrage des débutantes et aussi confirmées que sont toutes les tricoteuses!

05.01.2013 - 12:46

Country flag Alice wrote:

This is great... I am so happy to have found these videos and the paper clips are ingenious

17.12.2012 - 18:39

Country flag Sabrina wrote:

Super verständliche Anleitung, damit klappt der Handschuh! Danke! :)

07.10.2012 - 12:21

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for European yoke - Short overview. Neck is finished after the stitches for sleeves are knitted up
4:54
European yoke - Short overview. Neck is finished after the stitches for sleeves are knitted up

In this DROPS video we show a brief overview of how to knit a garment with an European yoke, where the neck is finished after the stitches for the sleeves are knitted up. The garment is worked as follows, according to these 5 steps: 1) BACK PIECE: Cast on stitches for the back of the neckline and work the back piece top down, at the same time as increasing each side until you have reached the correct shoulder-width. The back piece has slightly diagonal shoulders. 2) FRONT PIECE: The front piece is worked in 2 pieces (each side of the neck). Start by knitting up stitches along one shoulder on the back piece. Work the front piece top down, at the same time as increasing for the neckline. Repeat for the second front piece along the other back shoulder. 3) YOKE: On the next row, place all stitches on the same circular needle as follows: Work across one front piece, pick up stitches for the sleeve along the side of the front piece, work across the back piece, pick up stitches for the sleeve along the side of the second front piece, work across the second front piece. The yoke is continued back and forth across all stitches, with the rows starting and ending mid-front. 4) INCREASE FOR NECK, BODY AND SLEEVES: While working the yoke, begin by increasing only for the neckline and sleeves, then subsequently for both the body and sleeves. Once the final increase for the neckline is done, the 2 front pieces are joined mid-front and the piece is continued in the round. 5) BODY AND SLEEVES: When all the increases are finished and the yoke has been worked to the correct length, it is divided for the body and sleeves. The body is continued in the round with a circular needle, top down, while the sleeves wait.
Video thumbnail for European yoke 4/4 – Neck is finished after the stitches for sleeves are knitted up
10:39
European yoke 4/4 – Neck is finished after the stitches for sleeves are knitted up

In this DROPS video, we show you how to increase for the sleeves and for the front and back pieces when working a European yoke while, at the same time, casting on stitches under each sleeve. When all the increases are finished and the yoke is the correct length, it is divided for the body and sleeves. The body is continued in the round with circular needle, top down, while the sleeves wait. Work as follows: ROUND 1: Knit all stitches (we only show the beginning and end of this round). ROUND 2: Knit until there are 2 stitches left before the first marker, increase towards the right, knit 2, move the marker onto the right needle, increase towards the left, knit across the sleeve-stitches, increase towards the right, move the marker onto the right needle, knit 2, increase towards the left, knit until there are 2 stitches left before the next marker, increase towards the right, knit 2, move the marker onto the right needle, increase towards the left, knit across the sleeve-stitches, increase towards the right, move the marker onto the right needle, knit 2, increase towards the left, knit to end of round (= 1 stitch increased on each side of 2 stitches in each transition between body and sleeves = a total of 8 increased stitches). Repeat these 2 rounds the stated number of times in your pattern. The piece now measures X cm measured down the middle of the sleeve, from where stitches were knitted up, when the jumper is folded double at the shoulder. The piece measures X cm outermost along the armhole. Work to the first marker (= transition between front piece and left shoulder). Now divide the yoke for the body and sleeves, casting on stitches under both sleeves. Follow your pattern for how many stitches are placed on a thread, how many stitches are cast on and how you continue the body. INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through the back loop. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through the front loop. Yarn used: DROPS Andes. You need to read your chosen pattern and work the correct number of stitches. You can find pattern using this technique and more related videos below.
Video thumbnail for European yoke 3/4 Neck is finished after the stitches for sleeves are knitted up
15:23
European yoke 3/4 Neck is finished after the stitches for sleeves are knitted up

In this DROPS video we show how to work a European yoke and when front and back pieces are work for the desired length, stitches are knitted up for sleeves and all these pieces are worked simultaneously together. At the same time continue to increase for neck and sleeves, then towards the front pieces and the back piece. When the increases for the neck are done, cast on stitches between the front pieces and continue working in the round. Work like this: ROW 1 (right side): From the right side work as follows, starting with the left front piece: Knit 3, increase 1 stitch towards the left (read INCREASE TIP-1 below), knit the remaining stitches on the left front piece, insert 1 marker, knit up 11 stitches along the side of the left front piece, insert 1 marker, knit across the back piece, insert 1 marker, knit up 11 stitches along the side of the right front piece, insert 1 marker, knit across the right front piece until there are 3 stitches left, increase 1 stitch towards the right (read INCREASE TIP-1 below), knit 3. ROW 2 (wrong side): Purl all stitches (we only show the beginning and end of this row). ROW 3 (right side): Knit to the first marker (= left front piece), move the marker onto the right needle, increase 1 stitch towards the left, knit 11, increase 1 stitch towards the right, move the marker onto the right needle, knit to the next marker (= back piece), move the marker onto the right needle, increase 1 stitch towards the left, knit 11, increase 1 stitch towards the right, move the marker onto the right needle, knit to end of row (= right front piece), finish the row by casting on 13 stitches for the neckline. Now continue in the round. ROUND 1: Knit all stitches (we do not show this round). ROUND 2: Knit all stitches and increase 2 stitches for each sleeve as before. The number of stitches on each sleeve increases but the number of stitches on the front and back pieces stays the same. Work these 2 rounds 8 times. INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through the back loop. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through the front loop. Yarn used: DROPS Andes. You need to read your chosen pattern and work the correct number of stitches. You can find pattern using this technique and more related videos below.
Video thumbnail for European yoke 2/4 – Shoulders - Neck is finished after the stitches for sleeve are knitted up
11:35
European yoke 2/4 – Shoulders - Neck is finished after the stitches for sleeve are knitted up

In this DROPS video, we show you how to knit up stitches along the shoulders on the back piece when working a European yoke – the neckline is finished after the stitches for the sleeves are knitted up. The 2 front pieces are worked on either side of the neckline. We show you how to knit up 1 edge stitch + 14 stitches along the back right shoulder, then you continue with stocking stitch. When the piece measures 7 cm stitches are increased for the neckline, read INCREASE TIP-1 TOWARDS THE RIGHT below. We show 2 increases. At the end of the last row, we decrease the last stitch (the edge stitch). The right shoulder stitches are then placed on a stitch holder. The left front shoulder is knitted up and worked in the same way but in reverse (read description in your pattern). INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through the back loop. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through the front loop. Yarn used: DROPS Andes. You can find pattern using this technique and more related videos below.
Video thumbnail for European yoke 1/4 – Back piece
6:56
European yoke 1/4 – Back piece

In this DROPS video, we show you how to work the back piece on a garment with a European yoke. The neckline is finished after the stitches for the yoke are knitted up. We show you how to increase stitches for the shoulders. Cast on stitches for the back of the neckline and work the yoke back and forth, top down, while increasing each side until the number of stitches for the required shoulder width are achieved. The back piece has slightly diagonal shoulders. We show 4 increase-rows as follows: ROW 1 (wrong side): Purl. ROW 2 (right side): Read INCREASE TIP-1. Knit 3, increase 1 stitch towards the left, knit until there are 3 stitches left on the row, increase 1 stitch towards the right, knit. 3.ROW 3 (wrong side): Read INCREASE TIP-2. Purl 3, increase 1 stitch towards the left, purl until there are 3 stitches left on the row, increase 1 stitch towards the right, purl 3. AFTER ROW 3: Work ROWS 2 and 3 a total of 7 times. Cut the strand. Place the stitches on a stitch holder. INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through from the back. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through from the front. INCREASE TIP-2: INCREASE 1 STITCH TOWARDS THE LEFT – from wrong side: Use the left needle to pick up the back strand between 2 stitches from the previous row, purl through from the front. INCREASE 1 STITCH TOWARDS THE RIGHT – from wrong side: Use the left needle to pick up the front strand between 2 stitches from the previous row, purl through from the back. Yarn used: DROPS Andes. You can find pattern using this technique and more related videos below.
Video thumbnail for How to work an I-cord edge, back and forth
3:42
How to work an I-cord edge, back and forth

In this DROPS video we show how to work an I-cord edge both from the right side and from the wrong side. In this video the 6 first / 6 last stitches after the I-cord edge are worked in garter stitches (= the stitches are knitted on every row). At the beginning of the row from the right side, work like this: Slip 1 stitch purl-wise with strand in front, knit 1, work 6 garter stitches. Work stockinette stitch. At the end of the row from the right side, work like this: Work 6 garter stitches, slip 1 stitch purl-wise with strand in front, knit 1. At the beginning of the row from the wrong side, work like this: Slip 1 stitch purl-wise with strand in front, knit 1, work 6 garter stitches. Work stockinette stitch. At the end of the row from the wrong side, work like this: Work 6 garter stitches, slip 1 stitch purl-wise with strand in front, knit 1. We use the yarn DROPS Snow in the video. This technique is used in several patterns - you can find patterns by clicking on the pictures below: