DROPS Super Sale - SAVE 30% on 6 yarns all June!

How to knit and assembly the slippers in DROPS 150-4

Video thumbnail for How to knit and assembly the slippers in DROPS 150-4
In this DROPS video we show how to knit and sew up our very popular Little Red Riding Slippers in DROPS 150-4. We have already cast on 36 sts and knitted garter stitch until piece measures 4 cm.

These slippers are made in DROPS Snow, in the video we knit with the same yarn.

You must read the pattern and look at the chart to be able to follow. You’ll find the pattern by clicking on the picture below.

Patterns using this technique

DROPS 150-4

DROPS 150-4
Change language:

Video #567, listed in: Pattern tutorials, Socks and Slippers, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Carole wrote:

Is there any videos on knitting the top part of the slippers. I can do the slipper part. Thank you

02.12.2018 - 14:31

DROPS Design :

Dear Carolte, do you mean the part with cables around the leg? You'll find the written pattern under "LOOSE LEG WORKED ACROSS" in the pattern - work following diagram (03.12.2018 - 11:04

Mary MacDonald wrote:

I am a fairly experienced knitter, but. I find your video on the little red riding slippers a bit difficult to follow. It goes too fast and I have no sound. After you pick up the stitches do you divide the stitches evenly over the 4 needles? How do you then decide where the toe and heel are. I have tried this stage two or three times and getting frustrated.

16.10.2017 - 19:23

DROPS Design :

Dear Mrs MacDonald, the toe is towards the middle part worked back and forth previously, so that the middle of toe is the middle of this part - the heel is in the middle of sts you put aside and knit up later. You should have same number of sts on each side of both markers. Happy knitting!

17.10.2017 - 11:44

Country flag Mary MacDonald wrote:

Not a spammer just a frustrated knitter trying to follow your video.

16.10.2017 - 19:21

Country flag Dinou wrote:

Je manque d'information quant aux nombres de fois que l' on diminue de chaque côté des marqueurs Manque de précisions quand aux nombres de mailles tricotées pour poser les deux marqueurs car en respectant votre vidéo mon marqueur dos se trouve sur le côté du chausson

07.03.2017 - 22:33

DROPS Design :

Bonjour Dinou, vos marqueurs doivent être l'un au milieu devant (= côté pointe) et l'autre au milieu dos (= côté talon) et ne doivent pas être décalés; vous diminuez 1 m de chaque côté de chaque marqueur (les marqueurs restent en place) tous les 2 tours jusqu'à la hauteur indiquée (le nombre de rangs/diminutions va dépendre de votre tension en hauteur). Bon tricot!

08.03.2017 - 09:38

Country flag Charest Lisette wrote:

Pourriez vous me dire si on doit tricoter les rangs envers comme les mailles se présente j'ai de la difficulté a comprendre

19.01.2017 - 23:42

DROPS Design :

Bonjour Mme Charest, quand vous tricotez la torsade, lisez les rangs sur l'endroit de droite à gauche et les rangs sur l'envers de gauche à droite. Bon tricot!

20.01.2017 - 09:53

Country flag Susan wrote:

I am unable to hear your videos, is there something I need to do to hear them? also how many balls of yarn do I need for 300 g 6 if there are 50g? thank you Susan

19.10.2016 - 21:39

DROPS Design :

Hi Susan. Eskimo is 50 gr per ball, so you need 6 if you need a total of 300 gr. We are a worldwide company and our videos are watched by people around the world, speaking different languages, many of whom do not understand English. We have therefore written instructions to accompany this video, and there is no sound to disturb while watching. Enjoy!

20.10.2016 - 10:45

Linda wrote:

I have never seen knitting like this. Usually the yarn is in the right hand and twirled around the little finger. What style is this?

17.10.2016 - 17:52

DROPS Design :

Dear Linda, working with the yarn in the left hand is called "continental method" - see video below. Happy knitting!

19.10.2016 - 10:33

Country flag Fouesnant wrote:

Merci pour cette vidéo, j'étais bloquée et là je comprends mieux.

16.06.2016 - 08:33

Country flag Hélène Blanchette wrote:

Je suis le diagramme , mais la 4 et la 5 ième mailles devrait arriver sur endroit mais moi elle arrive sur l`envers pourquoi , je fais mes deux premiers rang sur endroit mais après ses rangs arrive sur l`envers . Merci

04.03.2016 - 14:31

DROPS Design :

Bonjour Mme Blanchette, le 1er rang du diagramme se tricote sur l'endroit ainsi: 3 m end (point mousse), 2 m end (jersey), 2 m env, 6 m end (torsade), 2 m env, 6 m end (torsade), 2 m env, 2 m end (jersey), 3 m end (point mousse) - lisez ensuite le diagramme de gauche à droite sur l'envers (tricotez les 3 m point mousse de chaque côté à l'end et les autres mailles comme elles se présentent). Voir aussi ici. Bon tricot!

05.03.2016 - 18:37

Country flag Blanchette Hélène wrote:

Comment faire le haut de ce chausson pour que le motif du patron soit le même. Merci

27.02.2016 - 17:55

DROPS Design :

Bonjour Mme Blanchette, pour avoir la même bordure torsadée, tricotez la "Bordure autour de la jambe" en suivant les indications du modèle et le diagramme A.1 - voir ici. Bon tricot!

29.02.2016 - 10:24

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to start a sock with a flounce
3:51
How to start a sock with a flounce

In this DROPS video we show how to start a sock with a flounce, like the “Dainty Duo” socks in DROPS 229-19. We cast on with 2 strands, but continue with 1 strand. Then we knit 4 rounds and on the next round we knit all stitches together 2 by 2. Then we work a rib (knit 1 twisted/purl 1). These socks are worked in DROPS Fabel, but in the video, we work with a thicker yarn; DROPS Snow. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work after charts to the socks in DROPS 229-20
11:52
How to work after charts to the socks in DROPS 229-20

In this DROPS video we show how we work after chart A.1 (flounces) and A.2 (lace pattern) to the “Kissing Kate” socks in DROPS 229-20. We show the beginning and end after chart A.1, and in chart A.2 we show round 3, 4, 9 and 10. We use less stitches than it says in the pattern. These socks are worked in DROPS Nord but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work the slippers in DROPS 203-37
20:51
How to work the slippers in DROPS 203-37

In this DROPS video we show how to work the “Carrot Squash” slippers in DROPS 203-37. We have already cast on stitches for size 35/37 and start the video by showing round 1 (only Knit). Then the rib, K1, P1. After the rib put 31 stitches on a stitch holder, work the other stitches back and forth. Then work these stitches, the new pickup stitches along the sides and the stitches from the stitch holder, and work around again. Decrease stitches and work around to finish measurement, cast off and fold the slipper and sew under foot in the outermost loop of the outermost stitch. These slippers are worked in DROPS Snow, the same yarn we use in the video. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.