DROPS Super Sale - 6 popular yarns on sale all month!

How to get an elastic edge when binding off / casting off

Video thumbnail for How to get an elastic edge when binding off / casting off
In this DROPS video we show one way to bind off / cast off to get an elastic edge, like you can find in DROPS 186-13.

Work like this:
Cast off with knit from the right side as follows: Knit 2 stitches, * insert the left needle into the 2 stitches on the right needle from left to right and knit them together, knit 1 *, work from *-* until there is 1 stitch left on the row. Cut the strand and pull it through the last stitch.

We use the yarn DROPS Snow in the video.

Patterns using this technique

DROPS 250-32

DROPS 250-32
DROPS 229-8

DROPS 229-8
DROPS 229-13

DROPS 229-13
DROPS 225-35

DROPS 225-35
Change language:

Video #1440, listed in: Learn to knit, Cast off, Other cast off techniques

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Pia wrote:

Super🧶😊

15.06.2024 - 08:50

Country flag Yvonne wrote:

Kan deze techniek ook gebruikt worden bij het afkanten van 2 recht, 2 averecht? Hoe doe je dat?

20.02.2024 - 19:24

DROPS Design :

Dag Yvonne,

Jazeker, dit kan ook bij boordsteek. Je kant dan gewoon op dezelfde manier af als in het filmpje.

01.03.2024 - 08:00

Country flag Cecilie wrote:

Hvordan gør man, hvis man har strikket i rib?

11.11.2022 - 13:58

DROPS Design :

Hei Cecilie. Det har vi ingen video på, men prøv å fell / strikk rett over rett og vrang over vrang. Eller så ksna du ta en titt på videoene: Hvordan felle av en elastisk kant med kast eller Hvordan sy en Italiensk avfelling over vrangbord. mvh DROPS Design

14.11.2022 - 08:21

Country flag Maj S wrote:

Genialt👏👏 Hvorfor har ingen fortalt meg dette før🙄😆

13.10.2022 - 20:28

Country flag Luisa wrote:

Se le maglie sono lavorate a coste, le maglie a rovescio le lavoro sempre a diritto o a rovescio? Grazie

10.01.2022 - 16:35

DROPS Design :

Buonasera Luisa, se deve lavorare a coste, le maglie che sul diritto del lavoro lavora a rovescio, sul rovescio le lavorerà a diritto. Buon lavoro!

05.03.2022 - 21:29

Country flag Ann Bruun wrote:

Jeg er ret god til at strikke, men en gang imellem bruger jeg jeres små videoer. De er simpelthen eminente. Med venlig hilsen ANN

24.08.2021 - 16:15

Country flag Renate wrote:

Ruller kanten seg når man har strikket plagget i rettstrikking?

15.06.2021 - 18:36

DROPS Design :

Hei Renate. Det kan den gjøre, litt avhengig av hvilket garn man strikker. Man kan unngå at det ruller seg ved å strikke noen rader/omganger med riller (1. rad/omg rett, 2. rad/omgang rett/vrang). Man kan ellers dampe kanten lett. mvh DROPS design

21.06.2021 - 09:20

Country flag Katherine wrote:

¿Puedo rematar todos los puntos tejiendo en derecho cómo lo están explicando, cuando estoy tejiendo punto de arroz?

16.04.2020 - 22:48

DROPS Design :

Hola Katherine. Si, puedes rematar de derecho, dependiendo de cómo remates los puntos el borde queda de diferente manera.

23.04.2020 - 19:57

Country flag Micheline Jolin wrote:

Super clair, net et précis. on comprend très bien merci

06.09.2019 - 22:08

Country flag Maria Cabral wrote:

Amei muito interessante, bem explicado

16.08.2019 - 16:43

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to join 2 pieces, then cast off with I-cord
10:50
How to join 2 pieces, then cast off with I-cord

In this DROPS video we show you how to join 2 pieces together (A and B), then cast off with an I-cord. Place all the stitches from A and B on the same needle, so that every second stitch on the needle belongs to A and B. We cast off with I-cord as follows: - Cast on 3 stitches onto the right needle. Slip the 3 stitches from the right needle onto the left needle with the working strand now situated 3 stitches in on the left needle. - ROW 1 (= right side): Knit 2, knit 3 twisted together (i.e., 1 stitch from the front piece and 1 stitch from the back piece is decreased). Slip 3 stitches from the right needle back onto the left needle. Do not turn (working like this tightens the working strand so the piece forms a small tube). - Repeat ROW 1 until there are 3 stitches left. Cast off and fasten all strands.
Video thumbnail for How to work a round cast-off edge, picking up stitches from the wrong side
1:41
How to work a round cast-off edge, picking up stitches from the wrong side

In this DROPS video we show how to work a round cast-off edge, knitting up stitches from the wrong side. We pick up stitches from 2 knitted rounds below the next stitch on the needle as follows: Pick up a stitch in the top loop from the wrong side and place it on the left needle. Knit together this loop and the first stitch on the left needle. * Pick up the next stitch in the next stitch-loop in the same way and knit it together with the next stitch on the needle. Cast off by passing the first stitch over the second stitch *. Repeat until all stitches are cast off. We use yarn DROPS Snow in the video. This technique can be used in several patterns – you will find these patterns by clicking on the pictures below:
Video thumbnail for How to work a round cast-off edge, picking up stitches from the right side
2:13
How to work a round cast-off edge, picking up stitches from the right side

In this DROPS video we show how to work a round cast-off edge, knitting up stitches from the right side. We pick up stitches from 2 knitted rounds below the next stitch on the needle as follows: Pick up a stitch in the first loop from the right side and place this onto the left needle. Knit together this loop and the next stitch on the left needle. * Pick up the next stitch in the next stitch-loop in the same way and knit it together with the next stitch on the needle. Cast off by passing the first stitch over the second stitch *. Repeat until all stitches are cast off. We use yarn DROPS Snow in the video. This technique can be used in several patterns – you will find these patterns by clicking on the pictures below:
Video thumbnail for How to do an Italian cast off with Knit 1 and Purl 1
4:58
How to do an Italian cast off with Knit 1 and Purl 1

In this DROPS video we show how to do an Italian cast off to a rib with knit 1 / purl 1 by sewing the cast off edge with needle and thread. With this technique we get an elastic cast off that is perfect for example on toe up socks, edge around neck, a shawl edge or sleeve edges when working top down. Cut yarn long enough for your cast off, approx 3-4 times the length of the edge you are casting off. Part 1: Start from the right side (the first stitch should be a knit stitch). Insert the needle into the 1st stitch as if to knit, lift the stitch off the needle, insert the needle into the 2nd stitch on the left needle (= knit stitch) as if to purl. Pull the thread through these 2 stitches (= 1 stitch cast off). Part 2: Insert the needle into the 1st stitch (purl stitch) as if to purl and lift the stitch off the needle, then insert the needle from the back side between the 1st and 2nd stitches and insert the needle through the 2nd stitch (purl stitch) as if to knit, pull the thread completely through the 2 stitches. Repeat Part 1 and Part 2 until all the stitches have been cast off. For each time Part 1 and Part 2 have been completed, 1 stitch is cast off. We use the yarn DROPS Snow in the video. This technique can be used in many patterns; you’ll find pattern by clicking on the pictures under:
Video thumbnail for Italian cast off – Knit 2 / Purl 2
6:34
Italian cast off – Knit 2 / Purl 2

In this DROPS video we show how to do an Italian cast off in a piece work with Knit 2 Purl 2. Before starting the cast off, work 1 round where 2 knit - 2 purl becomes 1 knit - 1 purl. Cut yarn long enough for your cast off, approx 4 times the length of the edge you are casting off. 1) Insert the needle into the 1st stitch (knit stitch) as if to knit and slip the stitch of needle. 2) Insert needle into 2nd stitch (knit stitch) as if to purl. 3) Insert needle into 1st stitch (purl stitch) as if to purl, lift the stitch off (the thread is now at the back of the work). From the back, insert the needle between 1st and 2nd stitches. 4) From the front, insert the needle into the purl stitch (2nd stitch). Repeat from the beginning. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern where you can use this technique by clicking on the picture below.
Video thumbnail for How to cast off with an i-cord edge in garter stitch
7:26
How to cast off with an i-cord edge in garter stitch

In this DROPS video we show how we cast off with an i-cord edge in a piece worked in garter stitches / ridge stitches. Cast on 2 stitches, knit up 1 stitch in the outermost loop of the bottom ridge = 3 stitches on the needle. *Push the stitches back to the beginning of the needle and work again from the right side without turning. Knit 2, slip the next stitch as if to knit, knit up a new stitch in the next ridge on the hood, pass the slipped stitch over the knitted-up stitch *, work from *-* until an edge has been worked. Knit up 1 stitch in each ridge, if this makes the edge tight, knit up 1 more stitch evenly (we have knitted 2 extra stitches in this piece). Knit together the last 3 stitches on the row. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern using this technique by clicking on the picture below.