Julia Desch kirjoitti:
This looks a lovely pattern and I will make it in my own wensleydale - the question is where do we find a non-slip sole to put on the bottom or stranding glue to ensure they dont slip - this is really important especially going up and down stairs......many thanks
13.10.2014 - 10:29DROPS Design vastasi:
Dear Mrs Desch, we kindly recommand you to contact the store where you bought your yarn, they may help you and give you advices & tips. Happy knitting!
13.10.2014 - 13:29
Dionne kirjoitti:
I am wanting to buy. Yarn local but what is comparable too
10.10.2014 - 17:37DROPS Design vastasi:
Dear Mrs Dionne, please click here to see how to get our yarn in your country. Happy knitting!
11.10.2014 - 10:58
Kat kirjoitti:
Hey! I'm really having troubles with this part here: "Then slip the sts from stitch holder back on needle and pick up 12-14-16 sts on each side of middle part (inside 1 edge st) = 61-65-71 sts on needle." What needle am I slipping the stitches onto? The same one as the one with ten stitches? Am I lnitting in the round here!? I also don't quite understand "the middle part".. Please help!
10.10.2014 - 04:43DROPS Design vastasi:
Dear Kat, the "middle part" is the upper foot part you worked back & forth for 7-10 cm, pick up now 12-14-16 sts along left side of the upper foot, knit the sts from st holder back and pick up 12-14-16 sts along left side of upper foot, join in the round (sts will be picked up with dpn and distribute around) and continue in garter st. Happy knitting!
10.10.2014 - 09:03
Kat kirjoitti:
Hey! I'm really having troubles with this part here: "Then slip the sts from stitch holder back on needle and pick up 12-14-16 sts on each side of middle part (inside 1 edge st) = 61-65-71 sts on needle." What needle am I slipping the stitches onto? The same one as the one with ten stitches? Am I lnitting in the round here!? I also don't quite understand "the middle part".. Please help!
09.10.2014 - 07:27DROPS Design vastasi:
Dear Kat, after you have worked the upper foot, you will pick up sts sts along each side of the upper foot and slip sts back from st holder, ie first pick up on the left side of instep (middle part worked back and forth), knit sts from st holder and pick up on the right side of instep (middle part worked back and forth), then continue in the round. Happy knitting!
09.10.2014 - 10:09
Jean Brickey kirjoitti:
First I agree with Ann Marie Marshall, I wish the pattern was written simpler. I am not sure if you are doing the foot in the round or in pieces. If in the round then why can't you use circular needles? Second it says to work 4 ridges. What is a ridge? and what is A.1? Not sure where you are going with this.
08.10.2014 - 19:46DROPS Design vastasi:
Dear Mrs Brickey, start with the cuff (around ankle), then work the instep back & forth over the first 10 sts (+ 2 sts inc), then pick up sts each side of instep + knit back sts from st holder and work foot in the round, dec then for heel and toe (seam is under foot). Finish then with the loose edge to sew around the slipper. 1 ridge = K2 rows or K1 round, P1 round. A.1= diagram for the pattern. You may use circular needle for foot but maybe then with magic loop technic. Happy knitting!
09.10.2014 - 09:54Margaret Folland kirjoitti:
I am from UK. Can you tell me if the wool I need is double knitting, Aran wool or something else ? Thanks xx
07.10.2014 - 10:52
Maggie Marshall kirjoitti:
Would live these knitted slipper boot patterns but they wouldn't print
07.10.2014 - 04:52DROPS Design vastasi:
Dear Mrs Marshall, when you click on the button "Print:pattern", make sure your browser allows popup windows, a new window with an add will open, click on "continue to print the pattern" in this new window to launch printing. Happy knitting!
07.10.2014 - 09:24
Ann Marie Marshall kirjoitti:
Please I need help on the pattern slippers 158-47 I do not understand the pattern I wish it was written out better that that
03.10.2014 - 19:53DROPS Design vastasi:
Dear Mrs Marshall, you first work some rounds around ankle, then work the upper foot over the first 10 sts (inc 1 st each side), then work around picking up sts along both side of upper foot to finish with sole. A video will comme soon, please stay tuned. Happy knitting!
04.10.2014 - 17:20
Nadine Lowden kirjoitti:
Pattern says all slippers require 300g. but when you go to order it is only 200g. I am confused. will 200g do a pair.
03.10.2014 - 16:42DROPS Design vastasi:
Dear Mrs Lowden, you need 300 g Andes to work these slippers, ie 3 balls Andes, check stock of your Drops store and contact them if necessary to know when they will have more if they don't have 3 balls right now. Happy knitting!
03.10.2014 - 16:49
Marie Hall kirjoitti:
What is the tension for the slipers
01.10.2014 - 18:14DROPS Design vastasi:
Dear Mrs Hall, tension to this pattern is 13 sts x 17 rows in stockinette st = 10 x 10 cm ( 4'' x 4''). Happy knitting!
02.10.2014 - 08:58
One Step Ahead#onestepaheadslippers |
|||||||
![]() |
![]() |
||||||
Neulotut DROPS tohvelit ”Andes”-langasta.
DROPS 158-47 |
|||||||
AINAOIKEINNEULE suljettuna neuleena: Neulo vuorotellen 1 krs oikein ja 1 krs nurin. AINAOIKEINNEULE tasona: Neulo kaikki kerrokset oikein. MALLINEULE: Katso ruutupiirros A.1. MALLINEULE 2: 1. krs (= oikea puoli): *2 o, 2 n*, toista *-* kunnes jäljellä on 2 s, 2 o. 2. krs (= nurja puoli): Neulo s:t siten miltä ne näyttävät. Toista 2. krs:ta. ---------------------------------------------------------- TOHVELI: Neulo aluksi varren alaosan reunus, neulo sitten jalkaosa. Neulo lopuksi varsi poikittain. VARSI: Luo 37-37-39 s sukkapuikoille nro 6 Andes-langalla. Neulo AINAOIKEAA suljettuna neuleena (kts. selitys yllä), kunnes työn pituus on n. 4 cm ja olet viimeksi neulonut nurjan krs:n. TARKISTA NEULETIHEYS! JALKAOSA: Neulotaan tasona. Jätä ensimmäiset 10 s työhön, siirrä loput 27-27-29 s apulangalle. Neulo nyt työn 10 s:lla päällisosa MALLINEULEENA 2 (kts. selitys yllä) ja luo SAMALLA 2 seuraavan krs:n loppuun 1 reunas (reunasilmukoilla neulotaan AINAOIKEAA, kts. selitys yllä) = 12 s. Kun päällisosan pituus on 7-8½-10 cm, päätä kummankin reunan reunas = 10 s. Ota apulangalla odottavat s:t takaisin työhön ja poimi päällisosan kummastakin reunasta (yhden reunasilmukan sisäpuolelta) 12-14-16 s = 61-65-71 s. KAIKKI MITAT OTETAAN JATKOSSA TÄSTÄ! Kiinnitä 1 merkkilanka päällisosan 10 s:n keskelle (= kärjen keskietu) ja 1 merkkilanka kantapään keskelle = 30-32-35 s kummassakin reunassa merkkilankojen välissä. Jatka neulomalla ainaoikeaa suljettuna neuleena. Kun työn pituus on 2 cm, neulo kummankin merkkilangan molemmin puolin 2 s oikein yhteen (työstä kapeni 4 s). Toista tällaiset kavennukset joka 2. krs, kunnes työn pituus on 5-5-6 cm. Päätä loput s:t kerralla. Ompele sauma jalan alta uloimmista silmukanreunoista, jottei saumasta tulisi paksu. POIKITTAIN NEULOTTU VARSI: Neulotaan tasona. Luo 22 s puikoille nro 6 Andes-langalla. Neulo 8 krs ainaoikeaa ja lisää SAMALLA viimeisellä krs:lla tasavälein 6 s = 28 s. Neulo sitten mallineuletta piirroksen A.1 mukaisesti (= 28 s), kunnes työn pituus on n. 35-36-38 cm. Neulo 8 krs ainaoikeaa ja kavenna SAMALLA 1. krs:lla tasavälein 6 s = 22 s. Päätä s:t. Aseta päätösreuna luomisreunan päälle ja kiinnitä 3 koristenappia varren ainaoikein -neuleeseen. VIIMEISTELY: Kiinnitä poikittain neulottu varsi jalkaosan varren luomisreunaan (eli ohjeen alussa tehdyn varren luomisreunaan) siten, että napit jäävät tohvelin ulkoreunaan ja aukko jää työn takaosaan (ompele työn nurjalta puolelta, jotta sauma jäisi huomaamattomaksi). Neulo toinen tohveli samoin ja tarkista, että varren aukko tulee työn vastakkaiseen sivuun. |
|||||||
Ruutupiirroksen selitykset |
|||||||
|
|||||||
![]() |
|||||||
Oletko tehnyt tämän mallin?Tägää tällöin kuviasi #dropspattern #onestepaheadslippers tai lähetä kuvat #dropsfan galleriaan. Tarvitsetko apua tämän ohjeen kanssa?Löydät 18 ohjevideota, kommentteja/kysymyksiä ja muuta osoitteessa www.garnstudio.com © 1982-2025 DROPS Design A/S. Pidätämme kaikki oikeudet. Tämä tiedosto ja kaikki sen alatiedostot on suojattu tekijänoikeuslailla. Lue lisää siitä, mitä voit tehdä ohjeillamme, verkkosivujemme jokaisen ohjeen alaosasta. |
Lisää kommentti ohjeeseen DROPS 158-47
Haluamme mielellämme kuulla mielipiteesi tästä ohjeesta!
Mikäli haluat esittää kysymyksen, valitse oikea kategoria alla olevasta valikosta - tällä tavoin saat vastauksen nopeammin. Pakolliset kentät on merkitty tähdellä *.