DROPS / 127 / 45

Let's Safari by DROPS Design

Crochet DROPS cap with brim and lace pattern border in "Lin".

Tags: hats, lace, summer hats,

DROPS design: Pattern no LN-022
--------------------------------------------------------
Size: S - M - L
Head circumference:
approx. 54/56 - 56/58 - 58/60 cm / 21"/22" - 22"/22½" - 22½/23½

Materials: DROPS LIN from Garnstudio
100-100-100 g color no 103, linen

DROPS CROCHET HOOK size 3 mm / C
– or size needed to get 22 sc = width 10 cm / 4''.

DROPS WOODEN BUTTON NO 501: 1 piece

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (41)

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET INFO:
Replace first sc at beg of every round with sc with ch 1 and finish every round with 1 sl st in ch from beg of round.

INCREASE TIP:
Inc 1 sc by working 2 sc in same st.

DECREASE TIP:
Dec 1 sc by working 1 sc but wait with last YO and last pull through (= 2 sts on hook), then work next sc but on last YO and pull through pull thread through all sts on hook = 1 sc dec.

PATTERN:
See diagram M.1, start of round is marked with arrow in diagram - NOTE: In M.1 replace first sc on round with sc with ch 1 and finish round with 1 sl st in ch from beg of round. Replace first dc at beg of every round with dc with ch 3 and finish every round with 1 sl st in 3rd ch from beg of round. Replace first tr at beg of every round with tr with ch 4 and finish every round with 1 sl st in 4th ch from beg of round.
--------------------------------------------------------

HAT:
The piece is worked top down.
Ch 5 on hook size 3 mm / C with 1 thread Lin and form a ring with 1 sl st in first ch.
ROUND 1: Work 12 sc in ch-ring – READ CROCHET INFO!
ROUND 2: * 1 sc in first st, 2 sc in next st *, repeat from *-* the rest of the round = 18 sc.
ROUND 3: * 1 sc in each of the first 2 sts, 2 sc in next st *, repeat from *-* the rest of the round = 24 sc.
ROUND 4: * 1 sc in each of the first 3 sts, 2 sc in next st *, repeat from *-* the rest of the round = 30 sc.
Continue inc like this (= inc 6 sc on every round) until there are 96-102-108 sc on the round (i.e. so that for every round 1 sc more is worked between every 1 sc inc). Continue working 1 sc in every st until piece measures 10-11-12 cm / 4"-4 3/8"-4 3/4" from mid down - while AT THE SAME TIME on last round inc 3-6-9 sc evenly - READ INCREASE TIP = 99-108-117. Now work PATTERN - see explanation above. After M.1 there are still 99-108-117 sc on the round and the piece measures approx. 16-17-18 cm / 6 1/4"-6 3/4"-7" from mid and down. Cut and fasten the thread, beg of round = mid back. Insert a marker mid front (in sizes S + L insert marker in the middle st and in size M insert marker between the middle 2 sts).

BRIM:
Beg from RS, 13-15-16 sts before marker mid front and work on hook size 3 mm / C with 2 threads Lin as follows: * 1 sc in each of the first 2 sts, 2 sc in next st *, repeat from *-* 9-10-11 times = 36-40-44 sc. Turn piece and work back with 1 sc in every sc. Continue to work sc back and forth while AT THE SAME TIME dec 1 sc in each side on every other row a total of 3 times - READ DECREASE TIP = 30-34-38 sc. Cut and fasten the threads, brim measures approx. 3 cm / 1 1/8''.

EDGE:
Work an edge on hook size 3 mm / C with 2 threads Lin as follows: 1 sc at beg of round (= mid back), * ch 1, skip 1 sc, 1 sc in next st *, repeat from *-* around the entire edge of cap and brim, and finish 1 sl st in sc from beg of round.

BUTTON COVER:
Work a cover for 1 button on hook size 3 mm / C with 1 thread Lin as follows:
ROUND 1: Ch 2, then work 16 dc in the first of the 2 ch worked, finish with 1 sl st at top of first dc.
ROUND 2: Work 1 sc in every dc and finish with 1 sl st in first sc on round = 16 sc.
ROUND 3: Ch 3 (= 1 dc), continue to work 1 dc in every other sc from previous round, finish with 1 sl st in 3rd ch from beg of round = 8 dc.
Place button inside the cover, sew around the edge and tighten tog.
Sew the button mid on top of cap.


Diagram

= ch 1
= 1 sc
= ch 4, 1 sl st in first ch (1 picot)
= 1 dc
= 1 tr
= begin here

Comments (41)

Leave your comment!

Conny Holm 21.08.2015 - 09:44:

Ups igen! Har opdaget (tror jeg) at mønsteret er deleligt med 3, hvilket jo forklarer "rapportens" maskeantal. VH CH

Conny Holm 20.08.2015 - 08:08:

Ups! Fik vist diagrammet i den gale hals. Har forstørret fotoet og kan se, at picot'erne skal hækles i den 2. fm-række. Undrer mig dog stadig over maskeantallet - lige/ulige til samme mønster? VH CH

Conny Holm 19.08.2015 - 22:37:

Har prøvet at skrive nogle få spørgsmål, men bliver hægtet af. Derfor denne kommentar: Det er en stor fejl, at man ikke kan forstå diagrammet og der ikke er en skriftlig vejledning hertil. Hvem H… har læst korrektur?

Andrea Ogsaint 19.07.2015 - 23:22:

Ich verstehe nicht, wie/wo man den Picot zwischen die beiden festen Maschen der Vorreihe anbringen soll, damit das Muster aussieht, wie auf dem Foto. Da ich die Wolle online gekauft habe, kann ich auch nicht im Laden nachfragen. Danke!

DROPS Design 28.07.2015 kl. 16:12:

Sie häkeln die 1. R mit festen M und Picots wie folgt: 2 fM, dann 4 Lm und 1 Kett-M in die 1. dieser Luft-M (das ist der Picot), dann kommen 3 fM, die Sie jeweils in die nächsten 3 fM häkeln. Es sind also immer 3 fM zwischen den Picots. In der R danach häkeln Sie immer 1 Stb und 2 Lm und überspringen mit den 2 Lm 2 fM und den dazwischenliegenden Picot, damit ergibt sich dann das Muster wie auf dem Foto.

Linda 28.04.2014 - 12:55:

Er det mulig å få ei skriftlig forklaring på diagrammet?

DROPS Design 07.05.2014 kl. 13:18:

Det er svärt at beskrive anderledes end diagram forklaringen. Men din lokale DROPS forhandler kan helt sikkert hjälpe dig med at forklare mönsteret. Held og lykke!

Valeria 20.04.2013 - 17:13:

Ho realizzato questo cappello, molto carino, solo che la parte traforata viene con fori troppo alti, molto meglio fare tutti i giri del motivo solo con maglie alte semplici

Nina 10.04.2013 - 12:05:

Naja klappt gut...bis auf das schild das hängt auf der rechten seite immer nach unten bzw. rollt sich....

Nicole 27.05.2012 - 15:09:

Ich verstehe das Muster, glaube ich nicht ganz. Bei mir sieht das Muster nicht so aus wie auf dem Bild. Lt. Muster soll das Picot zwischen der zweiten und dritten fM gehäkelt werden. Wie soll das gehen? Und: Wenn ich nach dem Stäbchen die 4 LM häkele und diese wie angegeben mit Kettmasche schließe, steht bei mir das Picet nach oben ab und nicht wie abgebildet nach innen. Kann mir jemand bitte schriftlich erklären wo ich wie in welche Masche stechen muß? Danke schön!

DROPS Design 29.05.2012 kl. 10:13:

Darf ich Sie bitten für Hilfe beim Häkeln bzw. Erklärung der Anleitung den Laden zu kontaktieren, in dem Sie die Wolle gekauft haben? Dort hilft man Ihnen gerne weiter. Und wir sind gerne für Sie da, wenn Sie glauben, einen Fehler in der Anleitung entdeckt zu haben.

Elaine 05.03.2012 - 01:15:

I cannot understand the diagram explaining the pattern M.1 in row 4 it says ch 1 ??

DROPS Design 06.03.2012 kl. 02:04:

In the pattern chart there are rounds with sc. When working a round with sc, replace 1st sc on round with 1 ch and finish round with 1 sl st in ch from beg of round.

Drops Design NL 30.08.2011 - 09:13:

U begint de eerste toer in M.1 (alleen vasten) met 1 l - hiermee gaat u 1 st "de hoogte in". Dan haakt u gewoon verder, 1 v in iedere v tot het einde van de tr. Aan het einde van de toer verbindt u het werk met 1 hv in die l die u aan het begin heeft gemaakt. gr. Angelique

Post a comment to pattern DROPS 127-45

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.