DROPS / 151 / 32

Dublin by DROPS Design

Bosnian crochet DROPS hat and mittens in ”Eskimo”.

DROPS design: Pattern no ee-473
Yarn group E
-----------------------------------------------------------
HAT:
Size: S/M – M/L
Head circumference: approx. 54/56 - 56/58 cm / 21’’/22’’ - 22’’/22 3/4’’
Materials:
DROPS ESKIMO from Garnstudio
50 g color no 23, taupe
50 g color no 48, beige
50 g color no 47, light beige

DROPS CROCHET HOOK SIZE 7 mm / US 10.75 – or size needed to get 14 sc = width 10 cm / 4’’.

MITTENS:
Size: S/M – M/L
Materials:
DROPS ESKIMO from Garnstudio
100 g color no 47, light beige
50 g color no 23, taupe
50 g color no 48, beige

DROPS CROCHET HOOK SIZE 7 mm / US 10.75 – or size needed to get 14 sc = width 10 cm / 4’’.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Wool
from 2.85 $ /50g
DROPS Eskimo uni colour DROPS Eskimo uni colour 2.85 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Eskimo mix DROPS Eskimo mix 3.30 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Eskimo print DROPS Eskimo print 3.60 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 19.95$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
WORK IN THE ROUND IN A CIRCLE:
After last st on the round, continue to next round with 1 st in next st (= first st on next round). NOTE: Insert a marker at the beg of round between last st and first st on the round, move the marker upwards.
----------------------------------------------------------

HAT:
The piece is worked top down.
With hook 7 mm/ US 10.75 and light beige ch 4 and form a ring with 1 sl st in first ch. REMEMBER THE CROCHET GAUGE!
Work in front loop of sts unless something else is described on round.
ROUND 1: READ WORK IN THE ROUND IN A CIRCLE! Work 9-9 sc in ch-ring.
ROUND 2: Work 1 sl st in every sc the entire round.
ROUND 3: Work 1 sl st and 1 ch in every sl st the entire round = 18-18 sts.
ROUND 4: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 18-18 sl sts.
ROUND 5: * 1 sl st in first sl st, in next sl st work 1 sl st and ch 1 * repeat from *-* the entire round = 27-27 sts.
ROUND 6: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 27-27 sl sts.
ROUND 7: * 1 sl st in each of the first 2 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 36-36 sts.
ROUND 8: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 36-36 sl sts.
ROUND 9: * 1 sl st in each of the first 3 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 45-45 sts.
ROUND 10: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 45-45 sl sts.
ROUND 11: * 1 sl st in each of the first 4 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 54-54 sts.
ROUND 12: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 54-54 sl sts.
ROUND 13: * 1 sl st in each of the first 5 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 63-63 sts.
ROUND 14: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 63-63 sl sts.
EXTRA ROUND, ONLY WORKED IN SIZE L/XL: * 1 sl st in each of the first 6 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 72 sts.
ROUND 15: Switch to beige and work 1 sl st in back loop of st in every sl st and 1 sl st in every ch the entire round = 63-72 sl sts.
ROUND 16-17: Work 1 sl st in back loop of every sl st the entire round.
ROUND 18: : * 1 sl st in each of the first 6-7 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 72-81 sts.
ROUND 19: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 72-81 sl sts.
ROUND 20: * 1 sl st in each of the first 7-8 sl sts, in next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 81-90 sts.
ROUND 21: Work 1 sl st in every sl st and 1 sl st in every ch the entire round = 81-90 sl sts.
ROUND 22: Switch to taupe and work 1 sl st in back loop of st in every sl st and 1 sl st in every ch the entire round.
ROUND 23-24: Work 1 sl st in back loop of every sl st the entire round.
ROUND 25-28: Work 1 sl st in front loop of every sl st the entire round.
ROUND 29-31: Work 1 sl st in back loop of every sl st the entire round.
ROUND 32: Work * 1 sl st in back loop in each of the first 8-9 sl sts, in back loop of next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 90-99 sts.
ROUND 33: Work 1 sl st in back loop of every sl st and 1 sl st in every ch the entire round = 90-99 sl sts.
ROUND 34: Work * 1 sl st in back loop in each of the first 9-10 sl sts, in back loop of next sl st work 1 sl st and ch 1 *, repeat from *-* the entire round = 99-108 sts.
ROUND 35-40: Work 1 sl st in back loop of every sl st and 1 sl st in every ch the entire round = 99-108 sl sts. Fasten off.
----------------------------------------------------------

MITTENS:
Worked in the round from cuff and up to fingers. READ WORK IN THE ROUND IN A CIRCLE! Work in front loop of sts unless something else is described on round. Ch 28-32 loosely on hook size 7 mm/ US 10.75 with taupe (ch-row should measure approx. 26-30 cm / 10¼”-11¾”, or work until desired length, the mitten will be approx. 5/6 cm / 2”-2½” more narrow than ch-row) and form 1 ring with 1 sl st in first ch. Work 1 round with sl sts in loops on the back of ch-row. Then work 1 sl st in back loop of every sl st the entire round until piece measures approx. 4-4 cm / 1½”-1½” = 28-32 sl sts. Switch to beige and work 2 rounds with sl sts in back loop of every sl st. Then work 1 sl st in front loop of every sl st the entire round until piece measures 8-8 cm / 3”-3”. Work 2 rounds with sl sts in back loop of every sl st. Switch to light beige and work 2 rounds more the same way. Then work 1 sl st in front loop of every sl st. When piece measures 15-15 cm / 6”-6”, make an opening for thumb by working 5-7 loose ch at beg of round, skip the next 5-7 sl sts and continue with sl st in the round as before (opening for thumb will be approx. 4-6 cm / 1½”-2½”, but can be made larger or smaller by inc or dec no of ch, skip in that case same no of sl sts as ch worked). On next round work 1 sl st in each of the 5-7 ch worked for thumb opening = 28-32 sl sts. Continue in the round the same way until piece measures 26-27 cm / 10 ¼”-10½”, or to desired length (approx. 2-2 cm /3/4”-3/4” remain until finished measurements). Now decrease by skipping every other sl st the entire round = 14-16 sl sts. Work 1 round without dec, then work 1 round while AT THE SAME TIME dec by skipping every other sl st the entire round = 7-8 sl sts. Work 1 round more with dec the same way. Cut the yarn and pull it through the remaining sts. Tighten tog and fasten.

THUMB:
Work 10-14 sl sts around the opening on thumb with light beige (1 sl st in each of the 5-7 skipped and 1 sl st in each of the 5-7 ch worked). Work sl sts in the round as before. When thumb measures approx. 5-6 cm / 2”-2½” (or desired length), work 1 round with sl sts while AT THE SAME TIME dec by skipping every other sl st = 5-7 sl sts remain. Cut the yarn and pull it through the remaining sts. Tighten tog and fasten.

Christina 30.01.2019 - 10:40:

I think the very second round of the hat is wrong! I mean... after I make 9 dc in the next round I am asked to do 1 sl-st in each dc and this is not an increase as we ought to do in a circle for a hat. In this case it increasing like a tower if you know what I mean...???

DROPS Design 30.01.2019 kl. 11:35:

Dear Christina, on the first round you crochet dc, but then you will only crochet slip stitches in the round, so on 2nd round you work 9 sl sts (= 1 sl st in each dc), then start to inc on next round (= round 3). Make sure your tension is right. Happy crocheting!

Vicky 26.01.2019 - 21:52:

Hay un fallo en las instrucciones. Vuelta 25 a 28 el punto enano se debe trabajar en la hebra delantera del punto.

Annette Petersen 21.11.2018 - 21:00:

Er det ikke en fejl, at huen er hæklet i kædemasker? Det giver mere mening at bruge fastmasker. Huen bliver alt for lille og tænker at den kun vil passe en dukke

DROPS Design 22.11.2018 kl. 08:27:

Hei Annette. det stemmer at du hekler i kjedemasker hele veien. Du hekler med tykt garn og tykk heklenål så hatten blir i de målene som er oppgitt. God fornøyelse.

Annette Petersen 21.11.2018 - 20:59:

Er det ikke en fejl, at huen er hæklet i kædemasker? Det giver mere mening at bruge fastmasker. Huen bliver alt for lille og tænker at den kun vil passe en dukke

Emma 20.11.2018 - 18:34:

Hallo, die Anleitung enttäuscht mich leider. Um keinen spitzen Hut zu bekommen habe ich bis auf zwei Runden mittendrin nur Zunahme-Runden gehäkelt um eine glatte Fläche zu erhalten. Jetzt bin ich aber schon bei 99 Maschen in Runde 12, egal. Ich muss nur wissen welchen Durchmesser muss ich für den oberen Kreis des Hutes haben bevor es mit hintengestochenen Maschen weitergeht?? Vielen Dank für die Hilfe!

DROPS Design 21.11.2018 kl. 08:29:

Liebe Emma, stimmt Ihre Maschenprobe? Sie müssen 14 fM = 10 cm haben - der Hut wird ganz mit Kett-Maschen gehäkelt. Der Kopfumfang vom Hut muss etwas enger als Ihr Kopfumfang so dass der Hut richtig im Platz bleibt. Viel Spaß beim häkeln!

Angeli 02.12.2017 - 20:06:

Kan du lägga ut en video över de första fem varven, så att man kommer igång på rätt sätt? Jag får det inte heller till en platt platta. Det blir en böjd liten skål. Är det fel på det svenska mönstret?

DROPS Design 05.12.2017 kl. 11:37:

Hei Angeli. Oppskriften skal være riktig, men husk å sjekke din heklefasthet. Hekler du for stramt, er det fort gjort at det blir en liten skål. God Fornøyelse!

Karen 02.11.2017 - 13:20:

Hej Drops! hvor meget skal cirklen måle i diameter, før man begynder at hækle i beige, dvs. efter de 14 omg.? de tegningerne der normal er i alle opskrifter hjælper meget for at se om man har gjort det rigtigt eller ej, men der er ikke en tenging i dette opskrift. på forhånd tak!

Lonnie 20.10.2017 - 16:04:

Toer 7: wat betekent 1hv in elke van de 2e hv? Moet je dan steeds 1 hv overslaan? Als daarna 1 hv + 1 l gehaakt moet worden kom je toch uit op 27 st. Net zoals in toer 6 en niet 36 zoals er in het patroon vermeldt staat. Wat doe ik fout?

DROPS Design 04.11.2017 kl. 14:13:

Hoi Lonnie, In de eerste vaste haak je een vaste en in de 2e vaste haak je een vaste (= haak 1 hv in elk van de eerste 2 vasten), in de derde vaste haak je 1 vaste en 1 losse. Dat herhaal je steeds (zonder steken van de vorige toer over te slaan) Daardoor meerder je elke 4 steken 1 steek, door 1 losse er tussen te haken en kom je op een totaal van 36 steken.

Inge 16.09.2017 - 18:23:

Die Designabteilung scheint die Frage aus 2013, ob wirklich Kettmaschen und nicht eher feste Maschen gehäkelt werden sollen, eingeschlafen zu sein. Wenn man das Foto vergrößert sieht es eher nach festen Maschen aus. Schade, dass hier nicht nachgebessert wird. Auch die Probleme mit der Maschenprobe/Nadelgrösse kann ich nur bestätigen. Dieses Mal bin ich von der Anleitung wirklich enttäuscht.

DROPS Design 18.09.2017 kl. 09:41:

Liebe Inge, diese Anleitung wird mit Kettmaschen gehäkelt, dieses Video zeigt wie man dieses Muster arbeitet. Viel Spaß beim häkeln!.

Elena 18.05.2017 - 22:06:

Il modello realizzato non corrisponde alle foto. Molto appuntito nella parte superiore e il colore talpa è insufficiente. Ho dovuto utilizzare gli altri colori per terminarlo. Anche la misura più grande risulta piccolo ed è impossibile utilizzarlo. Peccato perché l'idea del modello è molto bella.

Post a comment to pattern DROPS 151-32

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.