DROPS Super Sale - POUPE 30% em 6 fios de algodão em Julho!

Como medir a sua tensão numa amostra e como fazer contas num modelo.

Esta descrição pode ser usada tanto quando se tricota como quando se faz croché.

Esta é a maneira como fazemos contas num modelo partindo da tensão obtida na amostra:

Verifique sempre o esquema com as medidas dos diferentes tamanhos para descobrir qual é o seu tamanho.
Veja aqui uma lição sobre como ler os esquemas dos nossos modelos.

Cálculo:
As medidas de um modelo são calculadas de maneira a que as medidas indicadas no esquema sejam as medidas da peça depois de feita.
Para essas contas precisamos de saber qual a tensão da amostra; depois, o processo é o seguinte:

Se 10 cm em largura = 20 malhas em largura,
então, 1 cm em largura é (20/10) = 2 malhas.
Se a largura do corpo da peça for de 48 cm, então, precisamos de
48 cm x 2 malhas = 96 malhas.

Consequências:
Se obtiver uma amostra de 22 malhas por 10 cm em vez de 20 malhas, a sua peça será 5 cm mais estreita do que as medidas indicadas no diagrama.

Todas as contagens de malhas indicadas no modelo são calculadas a partir da tensão da amostra e isso afecta tudo: tal como, por exemplo, a forma do decote – os aumentos nas mangas – a orla de montagem - o raglan, etc.

Neste caso, precisa de mudar de tamanho de agulha :)


Tensão do ponto e amostra:

Amostra:
Para ter a certeza de que as medidas na sua peça = medidas indicadas no modelo, deve começar sempre por fazer uma amostra – a fim de obter a tensão correcta.

Monte mais malhas do que as indicadas para a amostra por 10 cm em largura e tricota um pouco mais do que 10 cm em altura, começando pelo tamanho de agulha sugerido.

Se a sua tensão na amostra for:
20 malhas em largura e 27 carreiras em altura em ponto meia = 10 x 10 cm.
Ponha uma fita métrica sobre a peça e conte as malhas:
20 malhas = 10 cm em largura e 27 carreiras em altura = 10 cm.

Resultado / consequências:
Mais do que 20 malhas – mudar para um tamanho de agulha maior
Menos do que 20 malhas – mudar para um tamanho de agulha mais pequeno.

Quando tiver encontrado o tamanho de agulha correcto, está pronta para começar.
Não se esqueça de ir verificando a sua tensão à medida que for tricotando; pode variar enquanto trabalha na peça.


Tamanho de agulha correcto ou errado:

Tamanho de agulha:
Não existe um tamanho correcto; todas as pessoas tricotam de maneira diferente.

O tamanho de agulha indicado é meramente indicativo.

Descubra qual o tamanho de agulha que se adapta à tensão do seu ponto para obter uma amostra correcta – se precisar de usar uma agulha 6 mm, quando o modelo sugere uma agulha 4 mm, então, faça-o.

A nossa própria equipa de designers usam diferentes tamanhos de agulhas ao tricotar um mesmo fio. É algo perfeitamente comum.


Tipos de agulhas:
É algo pessoal.

Existem agulhas em madeira, bambu, metal, plástico, bem como de outros materiais.
Cada tricotadeira descobre as suas preferidas e é normal que tenha uma tensão diferente ao usar diferentes tipos de agulhas (circulares, de pontas duplas, etc.).

Por isso mesmo, se não consegue obter a tensão exacta quando tricota – por exemplo – com agulhas de metal, experimente usar agulhas de um outro material, tal como a madeira, para ver se lhe proporciona melhores resultados.

Comentários (322)

Country flag Juliet escreveu:

Thank you for your reply, what is the ‘rule of three’?

23.01.2024 - 08:22

DROPS Design respondeu:

Dear Juliet, rule of three is a type of mathematical calculation for guessing one value from others. Here is an example in this lesson: If 10 cm in width = 20 stitches in width, how many stitches are there in 1cm in width? 1 cm in width has (20stitches/10cm) = 2 stitches. This is more easily calculated when you write them out in a piece of paper. You can look for "rule of three mathematics" and it should show you other examples. Happy knitting!

28.01.2024 - 20:31

Country flag Juliet escreveu:

I have knit 4 garnstudio patterns and I never seem to have the correct tension, I am always needing to go up 2 needle sizes to achieve correct tension which is making the knitting too loose. Could I use the suggested needles but work a larger size jumper if I worked out what size it would be? Not sure if the pattern would still work! Thank you 😊

22.01.2024 - 17:54

DROPS Design respondeu:

Dear Juliet, each person has a different personal gauge; you may work tighter than our designers, so your gauge will always be slightly tighter than the one indicated in the pattern and you will need larger needles each time. If you get the correct tension with larger needles, these shouldn't make the knitting too loose, because it should be the same tension as in the swatch. You can also work a larger size jumper if you calculate which one you can do with your gauge, using a rule of three. Happy knitting!

22.01.2024 - 20:08

Country flag Kristine escreveu:

Hi, I really find it difficult to figure out the kniting tension for 21 stitches - 40cm - 10x10. I am a total newbie and no idea where to start!

21.01.2024 - 10:19

DROPS Design respondeu:

Dear Kristine, which pattern are you working? 10x10 cm means that you should make a square that measures 10cm in height and width. With the numbers that you mention, it should be 21 stitches x 40 rows = 10x10cm. This means that, before starting the piece, you work a swatch that has 21 stitches and work 40 rows with 21 stitches (in stocking stitch or as specificied in the gauge) and it should measure 10x10cm. If it doesn't measure 10cm in width and height, then you change needle size, as specified in this lesson. Happy knitting!

22.01.2024 - 20:14

Country flag Beata escreveu:

Bardzo przydatna instrukcja obliczania próbki, dziękuję.

20.01.2024 - 18:29

Country flag Victoria escreveu:

Hola! Hice la muestra y llegó a los 10 cm en la hilera 27, no en la 33. Deberé cambiar a una aguja 4,5mm?

19.01.2024 - 18:02

DROPS Design respondeu:

Hola Victoria, qué patrón estás trabajando? Normalmente, lo más importante es que el número de puntos en 10 cm (el ancho) sea correcto, el número de filas se puede ajustar a medida que trabajas. Pero depende del patrón utilizado. Si nos indicas el patrón que estás trabajando y tu tensión completa (cuántos puntos en 10 cm) podremos ayudarte más.

22.01.2024 - 22:58

Country flag Tilly escreveu:

Please may I ask a question. As a total beginner, would it be possible to replace the twisted rib on pattern Visit Vienna, with regular rib. I understand I will lose the beautiful pattern feature. Thank you for your help.m

16.01.2024 - 09:13

DROPS Design respondeu:

Dear Tilly, sure, you can work regular rib K1,P1 if your like just note that it will then look somewhat different. Happy knitting!

17.01.2024 - 09:43

Country flag Nicola Francis escreveu:

I want to make the smallest size in this jumper. I have knitted a swatch for this pattern but I have 4 sts too many on the row (25) and 3 extra rows (31) to make 10 x 10 cm. I can’t find 4.25 circular needles anywhere online, so should i go up to 4.5? If so, should I do the rib using 4cm needles? I could do another swatch, but will i have enough wool to do a second one? Thank you

14.01.2024 - 19:53

Country flag Marjatta escreveu:

Answering... "Therefore, you need to use the main needle that is used for the specific pattern or most of it. For example, if you use a smaller needle for the rib and change to a larger needle for the rest of the piece, then the gauge is worked with the main, larger needle. If you could indicate to us which pattern you are working we may clarify which needle is used for the gauge" Thank you! I'm starting to knit December Bloom :-).

14.01.2024 - 14:00

Country flag Marjatta escreveu:

Hi, if you use two different sizes of needles (3,5 in round yoke, 4 in other parts), which one (3,5 or 4) does the knitting tension mean?

13.01.2024 - 19:31

DROPS Design respondeu:

Dear Marjatta, usually the gauge states which kind of stitch you are working (stocking stitch, garter stitch or even the specific chart). Therefore, you need to use the main needle that is used for the specific pattern or most of it. For example, if you use a smaller needle for the rib and change to a larger needle for the rest of the piece, then the gauge is worked with the main, larger needle. If you could indicate to us which pattern you are working we may clarify which needle is used for the gauge. Happy knitting!

14.01.2024 - 13:28

Country flag Denise escreveu:

If pattern is knitted with two strands should tension square be the same. Also what is equivalent yarn in Australia for Midara Angoria6 please

11.01.2024 - 06:03

Country flag Denise escreveu:

If a garment is knitted with two strands should the tension swatch be knitted the same. Also what is equivalent yarn in Australia for Midara Angoria6 yarn please.

11.01.2024 - 06:01

Country flag Denise escreveu:

If a pattern is knitted with 2 strands should the tension swatch be knitted the same What is equivalent yarn in australia for Midara Angoria 6 yarn please

11.01.2024 - 05:57

DROPS Design respondeu:

Dear Denise, read more about changing yarns and alternatives here, as we don't know the yarn, you might have to request help from your yarn store. Note that our yarn are available around the world - see list of worldwide shipping stores here. Happy knitting!

11.01.2024 - 08:41

Country flag Inge Kristensen escreveu:

Jeg synes raglan stykket bliver for langt men trøjen passer i omkredsen med maskeantallet. Skal jeg så strikke på en mindre pindestørrelse?

09.01.2024 - 09:09

Country flag Martine escreveu:

Ik heb maar 48 welke maat moet ik nemen voor de trui is dat XXL of XXXL

08.01.2024 - 07:44

DROPS Design respondeu:

Dag Martine,

Het handigst is om een kledingstuk erbij te pakken dat je goed zit en dan de maten daarmee te vergelijken. Voor meer informatie over kledingmaten kun je ook kijken om kledingmaat.nl

21.01.2024 - 19:32

Country flag Gaby escreveu:

Liebes Drops-Team, ich möchte gerne das Modell 236-34 mit der angegebenen Drops Air stricken. Ich denke da stimmt die Angabe der Maschenprobe nicht. Angabe Wolle: 17 M x 22 R mit Nadelstärke 5 Angabe Pullover: 16 M x 20 R mit Nadelstärke 5,5 meine Maschenprobe: 15 M x 25 R mit Nadelstärke 5 14 M x 24 R mit Nadelstärle 5,5 Ich stricke schon lange - eine solche Abweichung im Verhältnis Maschen und Reihen hatte ich noch nie.

29.12.2023 - 12:57

DROPS Design respondeu:

Liebe Gaby, mit Air ist 16 Maschen x 20 Reihen ziemlich üblich, das Wichtigste ist daß Ihre Maschenprobe stimmt, die Nadelgröße am besten so anpassen. Viel Spaß beim stricken!

02.01.2024 - 12:40

Country flag Hester Sluimer escreveu:

Mijn steken verhouding klopt in de breedte, maar in de lengte heb ik meer toeren nodig...... Lijkt mij geen probleem, maar hoe kan ik dit evt oplossen?

22.12.2023 - 11:05

DROPS Design respondeu:

Dag Hester,

Het hangt een beetje af van het patroon. Bij sommige patronen is de stekenverhouding in de lengte ook belangrijk, maar vaak staat dat er dan wel bij. Als je moet meerderen of minderen om de zoveel centimeter is dat geen probleem, maar als er in het patroon staat dat je om de zoveel naalden moet meerderen, moet je ven kijken of je uitkomt met de stekenverhouding.

07.01.2024 - 14:32

Country flag Susan escreveu:

The swatch for my pattern should be knit in the rib pattern, but I find it difficult to calculate the stitches/ rows. Can I knit in St.St instead? Thank you

21.12.2023 - 14:48

DROPS Design respondeu:

Dear Susan, the tension in width will be different depending on the pattern worked, feel free to tell us which pattern you are working on so that we can check together; or just use the questions section at the bottom of the pattern. Happy knitting!

21.12.2023 - 16:03

Country flag LORELLA PEDICONE escreveu:

Sto realizzando sweet Rosie Baby 11-4. Le indicazioni per il modello sono 25 maglie X 34 ferri . Cambiando i ferri sono riuscita ad ottenere la giusta larghezza ma il campione viene più alto. Che devo fare ? Grazie per il vostro aiuto

20.12.2023 - 00:15

DROPS Design respondeu:

Buonasera Lorella, se non riesce ad ottenere il campione indicato deve adattare le misure riportate nel modello al suo campione. Buon lavoro!

26.12.2023 - 20:37

Country flag Maureen P Kenefick escreveu:

Needles ttat are size10.75 dont come in the states,at least i can't find them. Size 11 is close. Is that ok?

17.12.2023 - 17:42

DROPS Design respondeu:

Dear Maureen, you can find here all of our DROPS stores that ship needles worldwide. You can check out whether they have the necessary needle size or if they can order them for you. In Europe, they are usually sold as mm size; for size 10.75 it would be 7mm. You can always try with a slightly larger or smaller needle, but remember that you still have to work a gauge to see that it matches the one in the pattern or to recalculate the pattern, as shown in this lesson. Happy knitting!

17.12.2023 - 23:35

Country flag Maureen escreveu:

Hi is the wool for this pattern equivalent to aran/worsted wool? Maureen

13.12.2023 - 17:46

Deixe um comentário ou uma pergunta acerca desta lição

O seu email não será publicado. Os campos obrigatórios estão assinalados com um *